Origination and Transformation of the Monoclinic and Orthorhombic Phases in Reactor Powders of Ultrahigh Molecular Weight Polyethylene

Using powerful synchrotron X-ray radiation of the beamline “Belok” operated by the National Research Center “Kurchatov Institute,” we perform X-ray diffraction (XRD) study of an intact, virgin (not subjected to any external mechanical loads) particle isolated from reactor powder of ultrahigh molecular weight polyethylene. Along with the peaks originating from the orthorhombic phase, we detect the peaks characteristic of the monoclinic phase that is stable only under mechanical stress, suggesting that the mechanical stress that leads to the formation of the monoclinic phase and persists at room temperature develops during the polymer synthesis. The monoclinic phase gradually disappears when the particle is heated stepwise in increments of 5 K, and its peaks become undetectable when the temperature reaches 340 K. We contrast the results obtained for the phase composition of the virgin particle to those for a tablet prepared by compaction of the same reactor powder at room temperature. XRD analyses of the tablet were performed on D2 Phaser (Bruker) instrument. The monoclinic phase that originates during the polymer synthesis and the one that forms in the tablet during compaction have different parameters. We discuss the mechanisms by which these two different monoclinic phases originate during the processes involved.

     

Spontaneous polarization in one-dimensional Pb(ZrTi)O3 nanowires

Formation of spontaneous polarization in one-dimensional (1D) structures is a key phenomenon that reveals collective behaviors in systems of reduced dimensions, but has remained unsolved for decades. Here we report ab initio studies on finite-temperature structural properties of infinite-length nanowires of Pb(Zr0.5Ti0.5)O3 solid solution. Whereas existing studies have ruled out the possibility of phase transition in 1D chains, our atomistic simulations demonstrate a different conclusion, characterized by the occurrence of a ferroelectric polarization and critical behaviors of dielectric and piezoelectric responses. The difference is accounted for by the use of depolarizing effects associated with finite thickness of wires. Our results suggest no fundamental constraint that limits the use of ferroelectric nanowires and nanotubes arising from the absence of spontaneous ordering.     

Morphology-dependent photonic circuit elements

We theoretically propose and experimentally demonstrate the design of a novel one-dimensional ringlike macroscopic optical circuit element. The similarity between morphologies of an optical planar waveguide and a whispering-gallery axially symmetric solid-state resonator is used.     

Production of relativistic antihydrogen atoms by pair production with positron capture and measurement of the Lamb shift

A beam of relativistic antihydrogen atoms — the bound state ( e⁺) — can be created by circulating the beam of an antiproton storage ring through an internal gas target. An antiproton which passes through the Coulomb field of a nucleus will create e⁺e⁻ pairs, and antihydrogen will form when a positron is created in a bound instead of continuum state about the antiproton. The cross section for this process is roughly 3Z ² pb for antiproton momenta about 6 GeV/c. A sample of 600 antihydrogen atoms in a low-emittance, neutral beam will be made in 1995 as an accidental byproduct of Fermilab experiment E760. We describe a simple experiment, Fermilab Proposal P862, which can detect this beam, and outline how a sample of a few-10⁴ atoms can be used to measure the antihydrogen Lamb shift to 1 %. Work supported in part by Department of Energy contract DE-AC03-76SF00515 (SLAC). Work supported by Fondo Nacional de Investigación Científica y Tecnológica, Chile.     

Ultralow-threshold Raman lasing with CaF2 resonators

We demonstrate efficient Raman lasing with CaF2 whispering-gallery-mode resonators. Continuous-wave emission threshold is shown to be possible below 1 microW with a 5mm cavity, which is to our knowledge orders of magnitude lower than in any other Raman source. Low-threshold lasing is made possible by the ultrahigh optical quality factor of the cavity, of the order of Q=5x10(10). Stokes components of up to the fifth order were observed at a pump power of 160 microW, and up to the eighth order at 1 mW. A lasing threshold of 15 microW was also observed in a 100 microm CaF2 microcavity. Potential applications are discussed.     

Thin-film spatial filters

A thin-film optical filter used as a one-dimensional spatial filter is presented, and its design is briefly examined. The filter consists of a stack of quarter-wave dielectric layers upon a right-angle prism that selectively cancel a reflected or transmitted plane-wave front for various angles of incidence. Transmittance and reflectance are low-pass functions or high-pass functions of the angle of incidence with a high degree of steepness. In combination, these filters exhibit bandpass transmittance with a variable bandwidth. Applications to detection of extrasolar planets are briefly discussed.     

Kinematics in matrix gravity

We develop the kinematics in Matrix Gravity, which is a modified theory of gravity obtained by a non-commutative deformation of General Relativity. In this model the usual interpretation of gravity as Riemannian geometry is replaced by a new kind of geometry, which is equivalent to a collection of Finsler geometries with several Finsler metrics depending both on the position and on the velocity. As a result the Riemannian geodesic flow is replaced by a collection of Finsler flows. This naturally leads to a model in which a particle is described by several mass parameters. If these mass parameters are different then the equivalence principle is violated. In the non-relativistic limit this also leads to corrections to the Newton’s gravitational potential. We find the first and second order corrections to the usual Riemannian geodesic flow and evaluate the anomalous nongeodesic acceleration in a particular case of static spherically symmetric background.     

Quantum spin Hall effect in inverted InAs/GaSb quantum wells

We review the recent experimental progress towards observing quantum spin Hall effect in inverted InAs/GaSb quantum wells (QWs). Low temperature transport measurements in the hybridization gap show bulk conductivity of a non-trivial origin, while the length and width dependence of conductance in this regime show strong evidence for the existence of helical edge modes proposed by Liu et al. [Phys. Rev. Lett., 2008, 100: 236601]. Surprisingly, edge modes persist in spite of comparable bulk conduction and show only weak dependence on magnetic field. We elucidate that seeming independence of edge on bulk transport comes due to the disparity in Fermi-wave vectors between the bulk and the edge, leading to a total internal reflection of the edge modes.     

Preservation of the Pt(100) surface reconstruction after growth of a continuous layer of graphene

Scanning tunneling microscopy shows that a layer of graphene can be grown on the hex-reconstructed Pt(100) surface and that the reconstruction is preserved after growth. A continuous sheet of graphene can be grown across domain boundaries and step edges without loss of periodicity or change in direction. Density functional theory calculations on a simple model system support the observation that the graphene can have different rotation angles relative to the hex-reconstructed Pt surface. The graphene sheet direction can be changed by incorporating pentagon-heptagon defects giving rise to accommodation of edge dislocations. The defect formation energy and the induced buckling of the graphene have been characterized by DFT calculations.     

Analysis of spectral properties of acoustic noise produced during magnetic resonance imaging

Magnetic resonance imaging (MRI) technique enables non-invasive analysis of the human vocal tract during phonation. Creation of MR images of the vocal tract is accompanied by simultaneous recording of the produced speech. The paper analyzes and compares spectral properties of an acoustical noise produced by mechanical vibration of the gradient coils during scanning in the open-air MRI equipment working in a weak magnetic field with low B₀ up to 0.2 T. This noise exhibits harmonic character, so it is suitable to analyze its properties in the spectral domain. Obtained results of spectral analysis will be used to devise a new cepstral-based filtering method for noise suppression of recorded speech.