Theoretic study of the electronic spectra of neutral and cationic PaO and PaO2

The electronic spectra of neutral PaO and PaO₂ and their mono- (PaO⁺, PaO₂ ⁺) and dications (PaO²⁺, PaO₂ ²⁺) were studied by performing multiconfigurational quantum chemical calculations at the CASSCF/CASPT2 level of theory taking into account spin–orbit coupling. Including the protactinium 7s, 6d, and 5f orbitals as well as selected orbitals of oxygen in the active space, the vertical excitation energies at the ground-state geometries have been computed up to ca. 36,000 cm^?1. The gas-phase electronic spectra at 298 and 3,000 K were evaluated on the basis of the computed oscillator strengths.     

The Novel Phosphadiazacalixcrown Compounds

Abstract

A new series of calixcrown compounds (11) containing some VA group elements (N, P) was synthesized. 1.3-bis-(aminoethoxy) calix[4]arene (I) was used as starting platform for the preparation of calixcrown compounds. Reaction of (I) with bis(a-hydroxyalky1)phenylphosphines in toluene lead to phosphadiazacalixcrown compounds (11). All obtained receptors are hydrolytic stable and are not oxidized by air. A more convenient synthesis of (II) involves treatment of (I) with 2.5-diphenyl-1.3.2.5-dioxaboraphosphorinanes (III) which are stable on air unlike bis-(a-hydroxyalkyl) phenylphosphines. Structure of obtained macrocycles was established by ¹H and ³¹P NMR spectroscopy.     

Structural characterization of electrochemically and in vitro biologically generated oxidation products of atorvastatin using UHPLC/MS/MS

Ultrahigh-performance liquid chromatography coupled with high-mass-accuracy tandem mass spectrometry (UHPLC–MS–MS) has been used for elucidation of the structures of oxidation products of atorvastatin (AT), one of the most popular commercially available drugs. The purpose of the study was identification of AT metabolites in rat hepatocytes and comparison with electrochemically generated oxidation products. AT was incubated with rat hepatocytes for 24 h. Electrochemical oxidation of AT was performed by use of a three-electrode off-line system with a glassy carbon working electrode. Three supporting electrolytes (0.1 mol L^?1 H₂SO₄, 0.1 mol L^?1 HCl, and 0.1 mol L^?1 NaCl) were tested, and dependence on pH was also investigated. AT undergoes oxidation by a single irreversible process at approximately +1.0 V vs. Ag/AgCl electrode. The results obtained revealed a simple and relatively fast way of determining the type of oxidation and its position, on the basis of characteristic neutral losses (NLs) and fragment ions. Unfortunately, different products were obtained by electrochemical oxidation and biotransformation of AT. High-mass-accuracy measurement combined with different UHPLC–MS–MS scans, for example reconstructed ion-current chromatograms, constant neutral loss chromatograms, or exact mass filtering, enable rapid identification of drug-related compounds. β-Oxidation, aromatic hydroxylation of the phenylaminocarbonyl group, sulfation, AT lactone and glycol formation were observed in rat biotransformation samples. In contrast, a variety of oxidation reactions on the conjugated skeleton of isopropyl substituent of AT were identified as products of electrolysis.

Avoiding problems with hydrogen misplacement in reporting crystal structures

Intermolecular hydrogen bonding is an integral part of many crystal structures. Hydrogen bonding sometimes results in one‐, two‐ or three‐dimensional supramolecular assemblies, a common feature of which is positional disorder of H atoms related to space‐group symmetry. Yet some reported structures fail to include all possible donor–acceptor close contacts, or to seek H‐atom electron densities associated with apparent D—H...A trios, while some H‐atom positions violate principles of chemistry or crystal physics. Modern diffraction equipment and sophisticated computing systems provide high‐quality data; thus, failure to characterize and report fully an accurate, complete and physically correct hydrogen‐bonding model should not be acceptable. We illustrate the relevant issues with three published examples in the hope of slowing the proliferation of these problems, with the scientifically desirable goal of improving the accuracy of crystallographic models while also providing improved search keys for information retrieval.     

Concentration of 137Cs and 40K in meat of omnivore and herbivore game species in mountain forest ecosystems of Gorski Kotar, Croatia

The aim of this study was to investigate ¹³⁷Cs and ⁴⁰K load in large mammal game species in the mountain forest region of Gorski Kotar in Croatia approximately a quarter of century after the Chernobyl accident. ¹³⁷Cs and ⁴⁰K activity were determined by the gamma-spectrometric method in 49 meat samples of five large game species: brown bear (Ursus arctos), wild boar (Sus scrofa), roe deer (Capreolus capreolus), red deer (Cervus elaphus), and chamois (Rupicapra rupicapra). The results indicated that herbivore game species (roe deer, red deer and chamois) show significantly lower ¹³⁷Cs concentrations than omnivore species (brown bear, wild boar), thereby confirming the hypothesis that different dietary strategy impact caesium concentrations in meat. The measured caesium load in brown bear meat was in the range of two orders of magnitude, while caesium load in wild boar meat was found in the range of one order of magnitude. The estimated effective equivalent dose showed that uptake of the highest caesium doses would be from consumption of omnivore species meat, while much lower doses could be taken in with the consumption of meat from herbivore species.     

Synthesis and characterization of ionic liquids: viologen bis{tetrakis[3,5‐bis(trifluoromethyl)phenyl]borate} salts

Several viologen bis{tetrakis[3,5‐bis(trifluoromethyl)phenyl]borate} salts were prepared by metathesis reaction of the corresponding viologen dibromides (diiodide) with sodium bis{tetrakis[3,5‐bis(trifluoromethyl)phenyl]borate} salt in a polar organic solvent. They were characterized for their physical and thermal properties by experimental techniques including variable temperature X‐ray diffraction. All exhibited low T _g and T _m, and their T _g/T _m (K) ratios were in the range 0.66–0.79. Several exhibited polymorphism and formed isotropic ionic melts at <150°C. They were soluble in many common organic solvents such as ethers, alcohols, acetonitrile and methylene chloride. They exhibited photoluminescence in both 1,2‐dimethoxyethane and methanol, as well as in the solid state. In the solid state, the emission spectra exhibited hypsochromic shift when compared with those in solutions of 1,2‐dimethoxyethane and methanol.     

The relationship between nanosilica dispersion degree and the tensile properties of polyurethane nanocomposites

The tensile properties and structure of silica-based polyurethane (PU) nanocomposites were parametrically studied as a function of silica type and weight concentration, polyol OH number, and mixing methods. The variation of the silica functionalization groups (from silanols to silazanes) had a relevant effect on dispersion. An elevated interparticle distance of the silica agglomerates improved substantially the tensile strength (from 44.3 to 82.8 MPa) and strain to failure (from 3.0 to 7.95) while maintaining elastic modulus (from 2.08 to 2.31 GPa) with respect to the neat PU matrix. Polyol’s with different OH numbers have shown to dramatically modify the silica dispersion degree by the modification of the stability of the colloidal dispersion. An increase of its value deteriorated dispersion and the tensile properties of the nanocomposites. The effect of three dispersion methods (ultrasonic dispersion, high shear mixing, and tip sonication) has shown to have a relative effect on the reduction of agglomerate size and the interparticle distance. High power sonication methods were more effective in reducing agglomerate size in contrast to shear methods. Classical theories of colloidal dispersion (Derjaguin, Landau, Verwey, and Overbeek) have been able to explain the correlation between the silica aggregation state and the final tensile properties of the nanocomposite.     

Applicability of photochemically generated pendant benzoyl peroxides in both “grafting from” and “grafting to” techniques

Methyl methacrylate and styrene copolymers containing pendant benzil groups, such as 1-[4-(2-methacroyloxyethoxy)phenyl]-2-phenyl-1,2-ethanedione-co-methyl metacrylate (BzMA/MMA), 1-[4-(2-methacroyloxyethoxy)phenyl]-2-phenyl-1,2-ethanedione-co-styrene (BzMA/S), and 1-phenyl-2-(4-propenoylphenyl)-1,2-ethanedione-co-styrene (PCOCO/S), were prepared and used as precursors for photochemically generated pendant benzoyl peroxides. Decomposition of the pendant benzoyl peroxides was subsequently used in grafting processes. Either irradiation or a combination of irradiation with subsequent thermal treatment was adopted for grafting a thin layer of BzMA/MMA copolymer onto the surface of LDPE films. The grafting resulted in a significant decrease in contact angle of the film surface. The same activation strategy was successfully adopted to initiate the polymerisation of acrylic or methacrylic acids from the surface of styrene copolymer films containing the initiator precursor in the polymer side chains (BzMA/S and PCOCO/S). The successful surface grafting was proved by contact angles measurement as well as by infrared spectroscopic analysis.     

Synthesis of the Aliphatic Subunit of the Macrolide LL‐Z 1640‐2 via Vasella Ring Opening of a 6‐Iodo‐4‐deoxy‐D‐mannose

The synthesis of the aliphatic subunit 9 of the macrolide LL‐Z1640‐2 (I), starting from a 4‐deoxy‐D‐mannose derivative 2a, is described. The procedure includes the first successful application of a Vasella ring opening reaction for a 4‐deoxypyranoside. Nucleophilic addition of an alkynyllithium reagent to the aldehyde 4 led to the propargylic alcohol 7, which was converted to the advanced building block 9 in two further steps.