Precipitation separation of lead and calcium,strontium, barium from acidic solutions using crown ether and tungstosilicic acid

It was found that lead reacts with 18-crown-6 (L) and tungstosilicic acid (H₄A) in acidic solutions and a compound with low solubility is formed what was confirmed by radiometric titration methods. Coprecipitation of complexion cation of PbL²⁺ with similar complexion cations of calcium, strontium and barium was studied. Formation of low soluble salts was utilized for separation of Pb from Ca, Sr and Ba from 1 mol·dm^–3 HNO₃. The ratio of Pb/Ca, Pb/Sr and Pb/Ba in the precipitation or separation factors S_pb/M undoubted depends on the ratio of the stability constants of lead and metals with 18C6 (_Pb/_M), what can be used for determination of more precise constant stability _M.     

Benzenoid Molecules with Uniform Distribution of π-Electrons within Rings

Summary. In a recent work it was demonstrated that in linear hexagonal chains the distribution of π-electrons into rings (as computed by means of the Randić–Balaban method) is uniform, irrespective of the nature of the terminal fragments. We now establish that an analogous, yet somewhat more complex, uniformity in the π-electron distribution exists also in double linear hexagonal chains, as well as in some other benzenoid systems.     

Thermal decomposition of mineral zircon by alkali metal hydroxides

Thermal decomposition of zircon mineral was studied in the presence of sodium and potassium hydroxides and in the presence of a waste mixture of hydroxides containing NaOH and KOH in a weight ratio of 23. The process was controlled in such a way that the decomposition products might contain the minimum possible amount of alkali and could thus be applied for the syntheses of zircon pigments without any further exacting treatment.

---

Zusammenfassung Es wurde die thermische Zersetzung eines Zirkonminerals in Gegenwart von Natrium- und Kaliumhydroxid-sowie in Gegenwart einer Altlauge mit einem Gehalt an NaOH und KOH im Verhältnis zwei zu drei untersucht. Der Prozeß wird derart gesteuert, daß die Zersetzungsprodukte einen möglichst geringen Anteil an Lauge besitzen und so ohne weitere arbeitsaufwändige Behandlungen zur Synthese von Zirkonpigmenten verwendet werden können.

---

, 23. , , , - .

     

Sulfide ion electrooxidation catalysed by cobalt phthalocyanine microcrystals

Electrooxidation of sulfide ion catalysed by microcrystals of cobalt phthalocyanine was investigated by cyclic voltammetry in 0.5M KNO₃ at pH 9.22. Traces of catalyst were immobilized at the surface of a paraffin-impregnated graphite electrode by the mechanical transfer of its powder. The electro-oxidation of HS^– proceeds in two irreversible steps, with the first peak between 0 V and –0.12 V and the second at 0.17 V. The first step is second order in HS^– and its product is the adsorbed disulfide, which may further dissociate to give adsorbed sulfur atoms. The reduction of sulfur occurs at –0.1 V.     

Photocatalytic TiO2 Coatings: Effect of Substrate and Template

Summary. Transparent TiO₂ films with a high photodegradation activity towards an azo dye in aqueous solution were prepared by sol–gel processing. Films on soda–lime glass supports protected with a thin silica barrier layer exhibited better crystallization and monodisperse nanoparticles, higher absorption of light below 370 nm, and higher photocatalytic activity than those films deposited on bare glass supports proving the detrimental effect of interdiffused sodium ions on the development of the anatase nanostructure. The effect of substrate was more pronounced in thinner films (300 nm) than in thicker ones (1200 nm), which were achieved by adding a template (i.e. Pluronic F127) to the sol.     

Sorption of radionuclides on inorganic sorbents

Inorganic sorbents are often used in separation of metals and radionuclides in radioanalytical application and they were also used in technological scale for separation of radionuclides in cleanup of Three Mile Island NPP. Inorganic sorbents become popular in the last years because no problem with organic contamination, there are stable against radiation, sorption efficiency can be tailor made for selective separation of chosen metal. Contrary to the organic sorbents they have usually lower capacity and chemical stability is limited to narrower pH. Nevertheless of some problems, many good properties of inorganic sorbents make them very attractive for sorption study.     

Correlation between Lipophilicity of the Ligands and the Hepatobiliary Properties of the Radiopharmaceuticals: Approach to the Development of New IDA Derivatives

The partition coefficient (log P) for n-octanol/water system was calculated applying PACO program for various theoretically possible mono and dihalogenated IDA derivatives. Some of the synthesized ligands (SOLCOIODIDA, IODIDA and DIIODIDA) were labeled with the technetium-99m. The biodistribution and influence of bilirubin on their biokinetics were investigated in rats. The correlation between partition coefficients of ligands increase (log P) and better hepatobiliary properties of ^99mTc-IDA derivatives was determined. The values of log P increase from 1.16 for SOLCOIODIDA, 3.11 for IODIDA to 3.47 for DIIODIDA. In correlation with these results, biliary excretion decreased for 59% for ^99mTc-SOLCOIODIDA and 11% for ^99mTc-IODIDA and ^99mTc-DIIODIDA under hyperbilirubinemia (3.5 min after injection) and 45%, 11% and 0.38% respectively (15 min after injection). The highest biliary excretion had ^99mTc-DIIODIDA (55.4% for 3.5 min). Considering the correlation between hepatobiliary properties and log P, the evaluation of biological properties for various trifluoromethyl mono and dihalogenated IDA derivatives was performed on the basis of the calculated log P in order to synthetize a new radiopharmaceutical for hepatobiliary scintigraphy.     

The stereochemistry of organosulfur compounds. XIX. The crystal and molecular structure of 10-(1,3-dithiolan-2-ylidene)-10H-indeno[1,2-f]-1,2,3,4,5-pentathiepin

The molecular structure of 10-(1,3-Dithiolan-2-ylidene)-10H-indeno[1,2-f] -1,2,3,4,5-pentathiepin S₇C₁₂H₈₉ has been determined by single crystal X-ray diffraction. The crystals are triclinic, space group PI, with two molecules in a unit cell of dimensions α = 8.931(2), b = 9.387(2), c = 10.175(2) Å, α = 75.73(2), β = 73.35(1), γ = 64.37(2)°. The structure was solved by direct methods, and refined to a final R value of 3.3% for 1925 independent reflections. The molecule consists of an indene core with a nearly co-planar dithiolane and a fused pentasulfide chain. The S₅C₂ ring is in the chair configuration, with an average S? S distance of 2.052 Å. There is no variation of bond lengths as is frequently seen in multi-sulfur chains. The indenone ring shows no evidence of any delocalization, while the dithiolane ring is disordered at the two methylene positions. No attempt was made to resolve the disorder, since it is frequently seen and has been thoroughly investigated previously.     

Liquid chromatography of benzene derivatives on a porous methacrylate copolymer containing epoxy groups

Summary The retention of benzene derivatives with nonpolar and polar substituents on a porous methacrylate copolymer containing epoxy groups using both nonpolar and polar eluents was investigated. When n-hexane is used as the eluent, the retention of n-alkylbenzenes and polymethylbenzenes is weaker than that of benzene. In the case of benzene derivatives containing polar functional groups their capacity ratios (k) on this porous polymer increases approximately linearly with the increase of the adsorbate molecules dipole moment. The retention characteristics of the methacrylate copolymer were compared with that of a styrene-divinylbenzene copolymer and silica gels with a hydroxylated surface and with a surface modified by chemically bonded alkylsilyl groups.     

Determination of boron in boron-alloyed steels by inductively coupled plasma atomic emission spectrometry

An inductively coupled plasma atomic emission spectrometry (ICP-AES) procedure has been developed and examined for the determination of boron content (0.01 up to about 2% B) in boron-alloyed steels such as POLDI ATA BOR (65% Fe, 19%Cr, 12% Ni, 1.5% Mn, 1% B), POLDI ATA BOR EXTRA (62% Fe, 18% Cr, 13% Ni, 2.5% Mo, 1.5% Mn, 1% B) and POLDI ATA BOR-R (75% Fe, 18% Cr, 3.5% Ti, 1.8% B). The steel sample is dissolved with a mixture of hydrochloric, nitric, sulfuric and phosphoric acids in a quartz vessel. Borides of alloyed metals, especially of iron and chromium, are quantitatively decomposed. The presence of phosphoric acid in a sample solution reduces the volatility of boric acid with water vapour.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria