Thermal transformation of polyacrylonitrile deposited on SBA-15 type silica

Thermogravimetry, diffuse reflectance infrared Fourier transform spectroscopy, and X-ray photoelectron spectroscopy (XPS) were used for the studying of thermally induced structural changes of polyacrylonitrile (PAN) deposited on the surface of SBA-15 type mesoporous silica. Polymer was introduced onto the support by the precipitation polymerization of acrylonitrile in aqueous suspension of SBA-15. Low temperature transformation (to 723?K) of the deposited PAN was analyzed. It was found that at about 523?K, exothermic cyclization of polymer chains to the so-called ladder form of PAN occurred. However, the total cyclization of PAN required higher carbonization temperatures, at which gradual dehydrogenation followed by graphitization was initiated. XPS revealed that the cyclic form of PAN and a relatively large amount of carbonyl species, formed during the carbonization of the PAN/SBA-15 composite at 623?K, were responsible for the high sorption capacity in the methyl?Cethyl ketone (MEK) vapor elimination. The efficiency in the MEK adsorption was also influenced by the content of PAN-derived carbon deposited on the SBA-15 surface.     

Design and Synthesis of Nitrogen-Rich Azo-Bridged Furoxanylazoles as High-Performance Energetic Materials

A series of novel energetic materials comprising of azo-bridged furoxanylazoles enriched with energetic functionalities was designed and synthesized. These high-energy materials were thoroughly characterized by IR and multinuclear NMR (¹H, ¹³C, ¹⁴N) spectroscopy, high-resolution mass spectrometry, elemental analysis, and differential scanning calorimetry (DSC). The molecular structures of representative amino and azo oxadiazole assemblies were additionally confirmed by single-crystal X-ray diffraction and X-ray powder diffraction. A comparison of contributions of explosophoric moieties into the density of energetic materials revealed that furoxan and 1,2,4-oxadiazole rings are the densest motifs while the substitution of the azide and amino fragments on the nitro and azo ones leads to an increase of the density. Azo bridged energetic materials have high nitrogen-oxygen contents (68.8–76.9 %) and high thermal stability. The synthesized compounds exhibit good experimental densities (1.62–1.88 g cm⁻³), very high enthalpies of formation (846–1720 kJ mol⁻¹), and, as a result, excellent detonation performance (detonation velocities 7.66–9.09 km s⁻¹ and detonation pressures 25.0–37.7 GPa). From the application perspective, the detonation parameters of azo oxadiazole assemblies exceed those of the benchmark explosive RDX, while a combination of high detonation performance and acceptable friction sensitivity of azo(1,2,4-triazolylfuroxan) make it a promising potential alternative to PETN.     

Thermal properties of fats extracted from powdered baby formulas

The aim of this research was to analyse composition, fatty acids distribution and oxidative stability of fats extracted from four samples of baby formulas. The fats were oxidized in a differential scanning calorimeter (DSC) under polythermal (dynamic) conditions and at normal pressure. The DSC experiments were carried out in an oxygen flow atmosphere using different, linearly programmed, heating rates in the range of 4?C12.5?°C/min. The extrapolated onset temperatures were determined using DSC exotherms and used for the assessment of the thermal oxidative stabilities of the samples. Activation energies (E _a), pre-exponential factors (Z) and reaction rate constants (k) for oil oxidation under DSC conditions were calculated using the Ozawa?CFlynn?CWall method and the Arrhenius equation. The melting characteristics of the studied fats were obtained. The fats extracted from the agglomerated samples with higher onset temperatures were more stable than the fats extracted from the initial samples of baby formulas.     

Study of flame-retardant finishing of cellulose fibres: Organic–inorganic hybrid versus conventional organophosphonate

The aim of this study was to introduce a non-formaldehyde inorganic–organic hybrid sol–gel flame-retardant precursor (SiOP) containing phosphorous, nitrogen, and silicon and to compare its functional properties with those of the conventional formaldehyde-containing organic flame-retardant agent, organophosphonate (OP). SiOP was used at concentrations of 2%, 4%, and 8%, and OP was used at a concentration of 200 g/dm³. Both agents were applied to 100% cotton (CO) woven fabric by the pad-dry-cure method under the appropriate conditions. The presence of the SiOP and OP coatings on the CO fabric was confirmed by scanning electron microscopy, energy dispersive X-ray spectroscopy and Fourier-transform infrared spectroscopy. The results of the vertical tests of flammability and the thermogravimetric analyses showed that the presence of the SiOP coating changed the thermal degradation pathway of the CO fabric and resulted in an increase in the thermo-oxidative stability of the cellulose fibres. The thermo-oxidative stability was enhanced by the addition of higher amount of dry solids. At comparable dry solids contents, OP preserved significantly greater flame retardancy and thermo-oxidative stability than did SiOP. These results indicated that the SiOP precursor could not act as an effective alternative to the OP agent in the flame-retardant protection of CO fabric.     

On certain arithmetic functions involving the greatest common divisor

The paper deals with asymptotics for a class of arithmetic functions which describe the value distribution of the greatest-common-divisor function. Typically, they are generated by a Dirichlet series whose analytic behavior is determined by the factor ζ²(s)ζ(2s − 1). Furthermore, multivariate generalizations are considered.     

Smart dampers control in a Remoissenet–Peyrard substrate potential

A model of spring-block on a moving plate with a nonlinear periodic substrate potential whose shape can be varied continuously as a function of a shape parameter is investigated. The dynamical study of the system for different values of the shape parameter involves the analysis of phase space, the construction of bifurcation diagrams, and the computation of the largest Lyapunov exponent. A smart damper associated with drag coefficient is proposed to reduce stick-slip and chaotic motions. The domain of validity of the control method is derived.     

Study of benznidazole–cyclodextrin inclusion complexes, cytotoxicity and trypanocidal activity

The current chemotherapy for Chagas disease is still based on benznidazole, which has low solubility, but complexation with cyclodextrins provides a way of increasing the solubility. The objective of this work was to characterize the inclusion complexes formed between benznidazole (BNZ) and randomly 2-methyled-β-cyclodextrin (RM-β-CD) in aqueous solution and study cytotoxicity and trypanocidal. BNZ:RM-β-CD solution complex systems were prepared and characterized using the phase solubility diagram, nuclear magnetic resonance and a photostability assays, also to investigate the in vitro trypanocidal activity with epimastigote forms of Trypanossoma cruzi and the study of cytotoxicity against mammal cells. The phase-solubility diagram displayed an A _L-type feature, providing evidence of the formation of soluble inclusion complexes. The continuous variation method showed the existence of a complex with 1:1 stoichiometry. Toxicity assays demonstrated that inclusion complexes were able to reduce the toxic effects caused by benznidazole alone and that this did not interfere with the trypanocidal activity of the benznidazole. The use of inclusion complexes benznidazole:cyclodextrin is thus a promising alternative for the development of a safe and stable liquid formulation and a new option for the treatment of Chagas disease.     

Does a Photocatalytic Synergy in an Anatase–Rutile TiO2 Composite Thin‐Film Exist?

It has often been suggested that anatase–rutile mixtures/composites synergistically enhance photocatalysis. However, in the case of dense thin‐films containing an intimate mix of both anatase and rutile phases, such an effect has not been observed. In synthesising combinatorial films with graded film thickness and phase, and applying established photocatalytic mapping methods, we were able to assess how dense thin‐films of intimately mixed anatase–rutile mixtures affect photocatalytic performance. We found that no photocatalytic synergy between anatase–rutile composites (29≤rutile %≤83) within such dense thin‐film systems exists. In fact, an increased presence of rutile caused the photocatalytic activity to fall. This was explained by the unfavourable energetics in the multiple electron transfers required between several neighbouring rutile and anatase sites for the photo‐generated electron to reach the material’s surface; encouraging the trapping of electrons within the bulk and increasing the likelihood of charge recombination. The decrease in photocatalytic activity was found to vary linearly with rutile component.