Synthesis and isomerization of conjugated oligomers containing azoimidazole unit

The Suzuki (for O1 – O3 ) and Stille (for O4 ) coupling polymerization of 2‐(phenylazo)imidazole bearing the benzyl protecting group at the 1‐position gave conjugated oligomers. The transformation from the neutral imidazole in the conjugated oligomer O2 , consisted of the alternating 2,5‐didecyl‐1,4‐phenylene unit, to the cationic imidazolium salt O2S was performed. Depending on the chemical structure of coupling partners, the absorption maximum of conjugated oligomers showed red shift or blue shift from that of the model compound M with the benzene ring at the 4,5‐positions. The absorption maximum wavelength of the cationic conjugated oligomer O2S showed a blue shift from that of the neutral conjugated oligomer O2 . The trans‐to‐cis photoisomerization of the azoimidazole unit in conjugated oligomers was observed by irradiating the light at 436 nm, and the conversion degree to the cis structure had a rough correlation with the maximum absorption wavelength of materials. The trans‐to‐cis photoisomerization in the film state was sluggish. On the other hand, the cis‐to‐trans thermal isomerization of the azoimidazole unit was confirmed and the absorbance returned to the initial state before the photoisomerization. The trans‐to‐cis photoisomerization of the cationic conjugated oligomer O2S required large energy, and the prolonged light irradiation might decompose the azoimidazole unit. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Positron annihilation properties of copolyimides and copolyamides with microphase‐separated structures

The positron annihilation lifetime (PAL) of a series of copolyimides and copolyamides with microphase‐separated structures was measured to investigate the effects of different hard‐segment polymers on the PAL properties of soft‐segment domains of poly(dimethyl‐siloxane) (PDMS) and poly(ethylene oxide) (PEO). The lifetime (τ₃) and intensity (I₃) of the long‐lived component are given as a function of the PDMS or PEO content for a series of copolymers, of which the density roughly obeys the additive rule except for the PDMS‐segmented copolyamides. The PDMS‐segmented copolyimides and copolyamides show much smaller I₃ values than those estimated from the additive rule. The lifetime distribution of the long‐lived component for the PDMS‐segmented copolyamides is composed of two components. The longer‐lifetime component is attributed to pure PDMS domains, and the shorter‐lifetime component is attributed to the polyamide domains, intermediate phases, and PDMS domains containing small amounts of short amide blocks. Despite the high PDMS content, the latter component is rather large. Thus, the positronium formation in the PDMS domains of the copolyimides and copolyamides is effectively reduced. This can be explained by the combination of the difference in the electron affinity of the PDMS and polyimide or polyamide segments and the incomplete phase separation. The PEO‐segmented copolyimides show much smaller I₃ values than those predicted from the additive rule. This is likely attributable to the effects of the intermediate phases. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1123–1132, 2000     

High-speed counter-current chromatography of apple procyanidins

Apple procyanidins were separated by high-speed counter-current chromatography using a type-J multilayer coil planet centrifuge. Several two-phase solvent systems with a wide range of hydrophobicities from a non-polar hexane system to polar n-butanol systems were evaluated their performance in terms of the partition coefficient and the retention of the phase. The best separation of procyanidins B and C was achieved with a two-phase solvent system composed of n-butanol-methyl tert.-butyl ether-acetonitrile-0.1% trifluoroacetic acid (2:4:3:8) using the lower phase as a mobile at a flow-rate of 1.0 ml/min.     

Aryne reaction with trifluoromethyl ketones in three modes: C-C bond cleavage, [2+2] cycloaddition and O-arylation

Trifluoromethyl ketones were found to be coupled with arynes in three modes depending upon their substitution patterns, namely C-C bond cleavage, [2+2] cycloaddition and O-arylation.     

Prompt gamma-ray analysis using cold and thermal guided neutron beams

The extraction behavior of uranium(VI), plutonium(IV) and some fission products like zirconium(IV), ruthenium(III) and europium(III) from 3.5M nitric acid with -irradiated organic phase pre-equilibratedn-dodecane solutions of dihexyl derivatives of hexanamide (DHHA), octanamide (DHOA) and decanamide (DHDA) has been investigated as a function of absorbed dose upto 184·10⁴ Gy. The results indicate that the extraction of uranium(VI) decreases gradually with dose upto 72·10⁴ Gy and becomes almost constant thereafter, while, the extraction of plutonium(IV) decreases upto a dose of 20·10⁴ Gy and then increases rapidly up to a dose of 82·10⁴ Gy indicating synergistic effects of radiolytic products formed at higher doses. Extraction of zirconium(IV) increases gradually upto a dose of 72·10⁴ Gy. Europium(III) does not get extracted with any of these amides in the entire dose range (0–184·10⁴ Gy) studied, however, ruthenium shows insignificant increase in extraction with dose. The decrease inD values noticed in the case of plutonium and zirconium after the dose of 72·10⁴ Gy which was attributed to the third phase formation and emulsification. Infrared studies confirm the final products of radiolysis as the respective amines and carboxylic acids. The degraded amide contents have been estimated by quantitative IR spectrophotometric technique. Extraction data obtained for uranium(VI) and plutonium(IV) with TBP/n-dodecane system have also been compared under similar experimental conditions.     

Surfactants having polyfluoroalkyl chains. II. Syntheses of anionic surfactants having two polyfluoroalkyl chains including a trifluoromethyl group at each tail and their flocculation-redispersion ability for dispersed magnetite particles in water

Anionic surfactants having two polyfluoroalkyl chains per molecule, i.e. the sodium salt of bis(1H, 1H, 2H,2H-heptadeca-fluorodecyl)-2-sulfosuccinate, CF₃(CF₂)₇(CH₂)₂OCOCH₂CH(SO₃Na)COO(CH₂)₂(CF₂)₇CF₃, the sodium salt of bis(1H, 1H, 2H, 2H-tridecafluoro-octyl)-2-sulfosuccinate, CF₃(CF₂)₅(CH₂)₂OCOCH₂CH(SO₃Na)COO(CH₂)₂(CF₂)₅CF₃, and the sodium salt of bis(1H, 1H, 2H, 2H-nonafluorohexyl)-2-sulfosuccinate, CF₃(CF₂)₃(CH₂)₂OCOCH₂CH(SO₃Na)COO(CH₂)₂(CF₂)₃CF₃, have been prepared from maleic anhydride, the corresponding alcohols possessing a polyfluoroalkyl chain and sodium hydrogen sulfite. The flocculation and redispersion abilities of these surfactants for dispersed magnetic particles in water have been examined to investigate the effect of the chain length. It was found that this ability was enhanced by an increase in the chain length. The contact angles for water for pelleted surface-modified magnetite have been measured. In order to compare this ability and the contact angles, data for other fluorinated surfactant have been obtained. The Kraff point, the surface tension and the pNa of the aqueous surfactant solutions have also been measured.     

Identification of oligosaccharides from histopathological sections by MALDI imaging mass spectrometry

Direct tissue analysis using matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) provides the means for in situ molecular analysis of a wide variety of biomolecules. This technology—known as imaging mass spectrometry (IMS)—allows the measurement of biomolecules in their native biological environments without the need for target-specific reagents such as antibodies. In this study, we applied the IMS technique to formalin-fixed paraffin-embedded samples to identify a substance(s) responsible for the intestinal obstruction caused by an unidentified foreign body. In advance of IMS analysis, some pretreatments were applied. After the deparaffinization of sections, samples were subjected to enzyme digestion. The sections co-crystallized with matrix were desorbed and ionized by a laser pulse with scanning. A combination of α-amylase digestion and the 2,5-dihydroxybenzoic acid matrix gave the best mass spectrum. With the IMS Convolution software which we developed, we could automatically extract meaningful signals from the IMS datasets. The representative peak values were m/z 1,013, 1,175, 1,337, 1,499, 1,661, 1,823, and 1,985. Thus, it was revealed that the material was polymer with a 162-Da unit size, calculated from the even intervals. In comparison with the mass spectra of the histopathological specimen and authentic materials, the main component coincided with amylopectin rather than amylose. Tandem MS analysis proved that the main components were oligosaccharides. Finally, we confirmed the identification of amylopectin by staining with periodic acid-Schiff and iodine. These results for the first time show the advantages of MALDI-IMS in combination with enzyme digestion for the direct analysis of oligosaccharides as a major component of histopathological samples.     

Internal Rotation of the Methyl Group in Cations of Toluene Derivatives

The potential of the internal rotation of the methyl group was determined for o-, m-, and p-fluorotoluene cations by pulsed field ionization spectroscopy. The potential of the internal rotational motion was also surveyed for other toluene derivative cations. It was found that the barrier height generally increases by ionization. The increase in the barrier height has been discussed in connection with the reduction of the internal rotational constant B by ionization. The geometrical distortion of the methyl group during the internal rotation has been suggested.     

Synthesis of novel glycopeptide-polyoxazoline block copolymers by direct coupling between living anionic and cationic polymerization systems

A novel glycopeptide-containing block copolymer, poly[O-(tetra-O-acetyl-β-D -glucopyranosyl)-L -serine]-block-poly(2-methyl-2-oxazoline) ( 5 ), was synthesized by mutual termination of living polymerizations of a sugar-substituted α-amino acid N-carboxyanhydride (NCA) ( 1 ) and 2-methyl-2-oxazoline ( 3 ). 5 was deacetylated to provide the glycopeptide-polyoxazoline block copolymer, poly[O-(β-D -glucopyranosyl)-L -serine]-block-poly(2-methyl-2-oxazoline) ( 6 ).     

Application of counter-current chromatography as a new pretreatment method for the determination of polycyclic aromatic hydrocarbons in environmental water

Counter‐current chromatography (CCC) was investigated as a new sample pretreatment method for the determination of trace polycyclic aromatic hydrocarbons (PAHs) in water environmental samples. The experiment was performed with a non‐aqueous binary two‐phase solvent system composed of n‐heptane and acetonitrile. The CCC column was first filled with the upper stationary phase, and then a large volume of water sample was pumped into the column while the CCC column was rotated at 1600 rpm. Finally, the trace amounts of PAHs extracted and enriched in the stationary phase were eluted out by the lower mobile phase and determined by gas chromatography–flame ionization detector (GC‐FID) or gas chromatography–mass spectrometry (GC‐MS). The enrichment and cleanup of PAHs can be fulfilled online by this method with high recoveries (84.1–103.2%) and good reproducibility (RSDs: 4.9–12.2%) for 16 EPA PAHs under the optimized CCC pretreatment conditions. This method has been successfully applied to determine PAHs in lake water where 8 PAHs were detected in the concentration of 40.9–89.9 ng/L. The present method is extremely suitable for the preparation of large volume of environmental water sample for the determination of trace amounts of organic pollutants including PAHs as studied in this paper.