Hydro­gen‐bonded supramolecular lattice of the 1:3:4 complex between [5,10,15,20‐meso‐tetrakis(4‐hydroxy­phenyl)­porphyrinato‐κ4N]­zinc(II), dibenzo‐24‐crown‐8 and methanol

The title compound, [5,10,15,20‐meso‐tetrakis(4‐hydroxy­phenyl)­porphyrinato‐κ⁴N]­zinc(II) tris(dibenzo‐24‐crown‐8) methanol tetrasolvate, [Zn(C₄₄H₂₈N₄O₄)]·3C₂₄H₃₂O₈·4CH₄O, was synthesized and its molecular structure precisely charac­terized by low‐temperature single‐crystal analysis. All the components are involved in hydrogen bonding with each other, thus forming an extensively hydrogen‐bonded supramolecular lattice. The functionalized porphyrin moiety coordinates both equatorially and axially to the neighboring species.     

Regioselective and Stepwise [8 + 2] Cycloaddition Reaction between Alkynyl-Fischer Carbene Complexes and Tropothione

The formal [8 + 2] cycloaddition reaction between alkynyl Fischer carbene complexes and tropothione leads to the regioselective formation of novel 3aH-cyclohepta[b]thiophene carbene complexes. Computational DFT calculations indicate that the process proceeds stepwise via antiaromatic zwitterionic intermediates.     

How does huperzine A enter and leave the binding gorge of acetylcholinesterase? Steered molecular dynamics simulations

The entering and leaving processes of Huperzine A (HupA) binding with the long active-site gorge of Torpedo californica acetylcholinesterase (TcAChE) have been investigated by using steered molecular dynamics simulations. The analysis of the force required along the pathway shows that it is easier for HupA to bind to the active site of AChE than to disassociate from it, which for the first time interprets at the atomic level the previous experimental result that unbinding process of HupA is much slower than its binding process to AChE. The direct hydrogen bonds, water bridges, and hydrophobic interactions were analyzed during two steered molecular dynamics (SMD) simulations. Break of the direct hydrogen bond needs a great pulling force. The steric hindrance of bottleneck might be the most important factor to produce the maximal rupture force for HupA to leave the binding site but it has a little effect on the binding process of HupA with AChE. Residue Asp72 forms a lot of water bridges with HupA leaving and entering the AChE binding gorge, acting as a clamp to take out HupA from or put HupA into the active site. The flip of the peptide bond between Gly117 and Gly118 has been detected during both the conventional MD and SMD simulations. The simulation results indicate that this flip phenomenon could be an intrinsic property of AChE and the Gly117-Gly118 peptide bond in both HupA bound and unbound AChE structures tends to adopt the native enzyme structure. At last, in a vacuum the rupture force is increased up to 1500 pN while in water solution the greatest rupture force is about 800 pN, which means water molecules in the binding gorge act as lubricant to facilitate HupA entering or leaving the binding gorge.     

New strategy for the determination of gliadins in maize- or rice-based foods matrix-assisted laser desorption/ionization time-of-flight mass spectrometry: fractionation of gliadins from maize or rice prolamins by acidic treatment

A procedure for determining small quantities of gliadins by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) in gluten-free foods containing relatively large amounts of prolamin proteins from maize or rice is described. We report for the first time that gliadins, the ethanol-soluble wheat prolamin fraction, can be quantitatively solubilized in 1.0 M acetic acid, while the corresponding ethanol-soluble maize or rice prolamin fraction remains insoluble in acetic acid. We describe a methodology for the detection of gliadins in maize and rice foods based on a two-step procedure of extraction (60% aqueous ethanol followed by 1 M acetic acid). Subsequent MALDI-TOFMS analysis of the resulting acidic extract from these gluten-free foods clearly confirms the presence of a typical mass pattern corresponding to gliadin components, ranging from 30 to 45 kDa. Depending on the percentages of maize or rice flours employed in the elaboration of these foods, the combined procedure enables levels of gliadins from 100 to 400 ppm to be detected. The efficiency of this combined procedure corroborates enzyme-linked immunosorbent assay data for a large number of maize/rice gluten-free foods by means of direct visualization of the characteristic gliadin mass pattern in maize or rice foods.     

Contactless conductivity detector array for capillary electrophoresis

A CE system featuring an array of 16 contactless conductivity detectors was constructed. The detectors were arranged along 70 cm length of a capillary with 100 cm total length and allow the monitoring of separation processes. As the detectors cannot be accommodated on a conventional commercial instrument, a purpose built set‐up employing a sequential injection manifold had to be employed for automation of the fluid handling. Conductivity measurements can be considered universal for electrophoresis and thus any changes in ionic composition can be monitored. The progress of the separation of Na⁺ and K⁺ is demonstrated. The potential of the system to the study of processes in CZE is shown in two examples. The first demonstrates the differences in the developments of peaks originating from a sample plug with a purely aqueous background to that of a plug containing the analyte ions in the buffer. The second example visualizes the opposite migration of cations and anions from a sample plug that had been placed in the middle of the capillary.     

Coating Platinum Nanoparticles with Methyl Radicals: Effects on Properties and Catalytic Implications

It was recently reported that the reaction of methyl radicals with Pt⁰ nanoparticles (NPs), prepared by the reduction of Pt(SO₄)₂ with NaBH₄, is fast and yields as the major product stable (Pt⁰‐NPs)?(CH₃)_n and as side products, in low yields, C₂H₆, C₂H₄, and some oligomers. We decided to study the effect of this coating on the properties of the Pt⁰‐NPs. The results show that the coating can cover up to 75 % of the surface Pt⁰ atoms. The rate constant of the reaction, k( ^. CH₃+Pt⁰‐NPs), decreases with the increase in the surface coverage, leading to competing reaction paths in the solution, which gradually become dominant, affecting the composition of the products. The methyl coating also affects the zeta potential, the UV spectra, and the electrocatalytic reduction of water in the presence of the NPs. Thus, the results suggest that binding alkyl radicals to Pt⁰ surfaces might poison the NPs catalytic activity. When the Pt⁰‐NPs are prepared by the reduction of a different precursor salt, PtCl₆^2?, nearly no C₂H₄ and oligomers are formed and the methyl coating covers a larger percentage of the surface Pt⁰ atoms. The difference is attributed to the morphology of the Pt⁰‐NPs: those prepared from Pt(SO₄)₂ are twinned nanocrystals, whereas those prepared from PtCl₆^2? consist mostly of single crystals. Thus, the results indicate that the side products, or most of them at least, are formed on the twinned Pt⁰ nanocrystal edges created between (111) facets. In addition, the results show that Pt⁰‐NPs react very differently compared with other noble metals, for example, Au⁰ and Ag⁰; this difference is attributed in part to the difference in the bond strength, (M⁰‐NP)?CH₃, and should be considered in heterogeneous catalytic processes involving alkyl radicals as intermediates.     

Mechanistic Insight into the Stereochemical Control of Lactide Polymerization by Salan–Aluminum Catalysts

Alkyl aluminum complexes of chiral salan ligands assembled around the 2,2′‐bipyrrolidine core form as single diastereomers that have identical configurations of the N donors. Active catalysts for the polymerization of lactide were formed upon the addition of benzyl alcohol. Polymeryl exchange between enantiomorphous aluminum species had a dramatic effect on the tacticity of the poly(lactic acid) (PLA) in the polymerization of racemic lactide (rac‐LA): The enantiomerically pure catalyst of the nonsubstituted salan ligand led to isotactic PLA, and the racemic catalyst exhibited lower stereocontrol. The enantiomerically pure catalyst of the chloro‐substituted salan ligand led to PLA with a slight tendency toward heterotacticity, whereas the racemic catalyst led to PLA of almost perfect heterotacticity following an insertion/auto‐inhibition/exchange mechanism.     

In-situ UV-Raman study on soot combustion over TiO2 or ZrO2-supported vanadium oxide catalysts

UV-Raman spectroscopy was used to study the molecular structures of TiO₂ or ZrO₂-supported vanadium oxide catalysts. The real time reaction status of soot combustion over these catalysts was detected by in-situ UV-Raman spectroscopy. The results indicate that TiO₂ undergoes a crystalline phase transformation from anatase to rutile phase with the increasing of reaction temperature. However, no obvious phase transformation process is observed for ZrO₂ support. The structures of supported vanadium oxides also depend on the V loading. The vanadium oxide species supported on TiO₂ or ZrO₂ attain monolayer saturation when V loading is equal to 4 (4 is the number of V atoms per 100 support metal ions). Interestingly, this loading ratio (V₄/TiO₂ and V₄/ZrO₂) gave the best catalytic activities for soot combustion reaction on both supports (TiO₂ and ZrO₂). The formation of surface oxygen complexes (SOC) is verified by in-situ UV Raman spectroscopy and the SOC mainly exist as carboxyl groups during soot combustion. The presence of NO in the reaction gas stream can promote the production of SOC. Supported by the National Natural Science Foundation of China (Grant Nos. 20473053, 20773163 and 20525621), the Beijing Natural Science Foundation (Grant No. 2062020), and the 863 Program of China (Grant No. 2006AA06Z346)