Trapping Nanostructures on Surfaces through Weak Interactions

The assembly of imidazole‐functionalized phenanthroline‐strapped zinc porphyrins (ZnPorphen) with alkyl or polyethylene glycol (PEG) side chains was studied in solution and by AFM after casting on highly oriented pyrolytic graphite (HOPG) or mica. The nature of the solvent and its evaporation time influenced the morphology of the objects observed. On HOPG, short rods of about 100 nm were observed after fast evaporation of solutions of the alkyl derivatives in CHCl₃, THF, or pyridine, whereas islands of aligned rows of longer wires were obtained from methylcyclohexane (MCH). Slow evaporation of MCH led to a three‐dimensional assembly. The PEG porphyrin assembled into short wires on HOPG or fibers on mica after slow evaporation of solutions in THF. This study shows the role of surface–molecule interactions in the interfacial assembly of ZnPorphen derivatives and contributes to understanding the parameters that control their noncovalent assembly into molecular wires on a surface.     

Dissolution kinetics of fluorapatite in the hydrochloric acid solution

A thermochemical study of hydrochloric acid attack of synthetic fluorapatite was performed by a DRC. The calculated thermogenesis curves show one peak. The plot of the heat quantity as a function of the dissolved mass undergoes only one straight segment, and the thermogenesis curves present a single peak, suggesting the occurrence of a one-step dissolution process. The dissolution kinetics was examined according to the heterogeneous reaction models and showed that the dissolution is controlled by the product layer diffusion process with a reaction rate expressed by the following semiempirical equation; \(\left[ {1 + 2(1 - X) - 3(1 - X)^{{\frac{2}{3}}} } \right] = 3195 \times 10^{ - 2} C^{0.145} \left( {\frac{S}{L}} \right)^{ - 0.628} e^{{ - \frac{2600}{\text T}}} t\). The activation energy was determined as 21.6 ± 1.5 kJ mol^?1     

Efficient photoelectrodes from anatase TiO2 nanotube arrays decorated with particles/rods/3D microflower rutile crystals for photoelectrochemical water splitting

Journal of Solid State Electrochemistry - Efficient photoanodes are designed of vertically aligned anatase TiO2 nanotube arrays (anatase TNTAs) decorated with different shaped rutile TiO2...     

On classification of four-dimensional nilpotent Leibniz algebras

Leibniz algebras are certain generalization of Lie algebras. In this paper, we give the classification of four-dimensional non-Lie nilpotent Leibniz algebras. We use the canonical forms for the congruence classes of matrices of bilinear forms and some other techniques to obtain our result.     

A functional series expansion method for response analysis of non-linear systems subjected to random excitations

A Wiener-Hermite functional series expansion method for response analysis of nonlinear systems under random excitations is presented. The formal procedure for the derivation of the deterministic equations governing the Wiener-Hermite kernel functions is described. A singleterm expansion is used to analyze the non-stationary responses of a damped Duffing oscillator subjected to several modulated white noises. An iterative procedure for evaluating the kernel functions and the mean-square responses of the Duffing oscillator is developed. For several values of non-linearity strength and different damping coefficients the non-stationary variances and autocorrelations of the response are obtained. The results are compared with those found by the digital simulations and the existing methods.     

Strength of interactions between immobilized dye molecules and sol-gel matrices

In this paper we present a new theory to re-examine the immobilization technique of dye doped sol-gel films, define the strength and types of possible bonds between the immobilized molecule and sol-gel glass, and show that the immobilized molecule is not free inside the pores as was previously thought. Immobilizing three different pH sensitive dyes with different size and functional groups inside the same sol-gel films revealed important information about the nature of the interaction between the doped molecule and the sol-gel matrix. The samples were characterized by means of ultraviolet-visible spectrophotometer (UV-VIS), thermal gravimetric analysis (TGA), mercury porosimetry (MP), nuclear magnetic resonance spectroscopy ((29)Si NMR) and field-emission environmental scanning electron microscopy (ESEM-FEG). It was found that the doped molecule itself has a great effect on the strength and types of the bonds. A number of factors were identified, such as number and types of the functional groups, overall charge, size, pK(a) and number of the silanol groups which surround the immobilized molecule. These results were confirmed by the successful immobilization of bromocresol green (BCG) after a completely polymerized sol-gel was made. The sol-gel consisted of 50% tetraethoxysilane (TEOS) and 50% methyltriethoxysilane (MTEOS) (w/w). Moreover, the effect of the immobilized molecule on the structure of the sol-gel was studied by means of a leaky waveguide (LW) mode for doped films made before and after polymerization of the sol-gel.     

Development and application of a validated stability-indicating high-performance liquid chromatographic method using photodiode array detection for simultaneous determination of granisetron, methylparaben, propylparaben, sodium benzoate, and their main degradation products in oral pharmaceutical preparations

A simple, rapid, and sensitive RP-HPLC method using photodiode array detection was developed and validated for the simultaneous determination of granisetron hydrochloride, 1-methyl-1H-indazole-3-carboxylic acid (the main degradation product of granisetron), sodium benzoate, methylparaben, propylparaben, and 4-hydroxybenzoic acid (the main degradation product of parabens) in granisetron oral drops and solutions. The separation of the compounds was achieved within 8 min on a SymmetryShield RP18 column (100 x 4.6 mm id, 3.5 microm particle size) using the mobile phase acetonitrile--0.05 M KH2PO4 buffered to pH 3 using H3PO4 (3+7, v/v). The photodiode array detector was used to test the purity of the peaks, and the chromatograms were extracted at 240 nm. The method was validated, and validation acceptance criteria were met in all cases. The robust method was successfully applied to the determination of granisetron and preservatives, as well as their degradation products in different batches of granisetron oral drops and solutions. The method proved to be sensitive for determination down to 0.04% (w/w) of granisetron degradation product relative to granisetron and 0.03% (w/w) 4-hydroxybenzoic acid relative to total parabens.     

New antidepressant drug candidate: Hypericum montbretti extract

This study was designed to investigate possible antidepressant-like effects of the extract prepared from the flowers of Hypericum montbretti Spach. (Guttiferae, Clusiaceae). Phytochemical constituents of the methanolic extract were analysed by HPLC method. The main flavonoid component was detected as rutin, and another highly concentrated phenolic compound was quercitrin. Antidepressant activity of the extract was examined by tail suspension and modified forced swimming tests, whereas the motor coordination of the animals was tested by the Rota-Rod apparatus. Reboxetine at a dose of 20 mg?kg?1 was used as a reference drug. Dose-dependent antidepressant activity was observed in both tests following the administration of extract at 100 and 250 mg?kg?1 doses. To the best of our knowledge, this is the first study reporting the antidepressant activity of H. montbretti extract. Additionally, the results of this work support previous papers reporting the antidepressant activity of rutin.     

Nonlinear equations for the recurrence coefficients of discrete orthogonal polynomials

We study polynomials orthogonal on a uniform grid. We show that each weight function gives two potentials and each potential leads to a structure relation (lowering operator). These results are applied to derive second order difference equations satisfied by the orthogonal polynomials and nonlinear difference equations satisfied by the recursion coefficients in the three-term recurrence relations.     

SERS-based sandwich immunoassay using antibody coated magnetic nanoparticles for Escherichia coli enumeration

A method combining immunomagnetic separation (IMS) and surface-enhanced Raman scattering (SERS) was developed to enumerate Escherichia coli (E. coli). Gold-coated magnetic spherical nanoparticles were prepared by immobilizing biotin-labeled anti-E. coli antibodies onto avidin-coated magnetic nanoparticles and used in the separation and concentration of the E. coli cells. Raman labels have been constructed using rod shaped gold nanoparticles coated with 5,5-dithiobis-(2-nitrobenzoic acid) (DTNB) and subsequently with a molecular recognizer. Then DTNB-labeled gold nanorods were interacted with gold-coated magnetic spherical nanoparticle-antibody-E. coli complex. The capture efficiency and calibration graphs were obtained and examined in different E. coli concentrations (10(1)-10(7) cfu mL(-1)). The correlation between the concentration of bacteria and SERS signal was found to be linear within the range of 10(1)-10(4) cfu mL(-1) (R(2) = 0.992). The limit of detection (LOD) and limit of quantification (LOQ) values of the developed method were found to be 8 and 24 cfu mL(-1), respectively. The selectivity of the developed immunoassay was examined with Enterobacter aerogenes, Enterobacter dissolvens, and Salmonella enteriditis which did not produce any significant response. The ability of the immunoassay to detect E. coli in real water samples was also investigated and the results were compared with the experimental results from plate-counting methods. There was no significant difference between the methods that were compared (p > 0.05). This method is rapid and sensitive to target organisms with a total analysis time of less than 70 min.