Bioactive isocoumarins from a terrestrial Streptomyces sp. ANK302

Four isocoumarins have been isolated from the terrestrial Streptomyces sp. ANK302, namely 6,8-dimethoxy-3-methylisocoumarin (1), 6,8-dihydroxy-3-methylisocoumarin (2), 6,8-dihydroxy-7-methoxy-3-methylisocoumarin (3), and 6,7,8-trimethoxy-3-methylisocoumarin (4). Compound 1 is a new naturally-occurring isocoumarin, and 2 was isolated as a new bacterial product. The structures 1-4 were deduced from high resolution mass, 1D and 2D NMR spectra and by comparison with related compounds from the literature. Compound 2 showed a strong zoosporicidal activity at a concentration of 5 microg/mL against a phytopathogenic oomycete, Plasmopara viticola, and 1 was active against     

Regioselective Synthesis of 1,8-Naphthyridinone-Annulated Oxygen and Sulfur Heterocycles by Tri-n-butyl Tinhydride–Mediated Aryl Radical Cyclization

The tin hydride–mediated cyclizations of a number of ethers, sulfides, and sulfones under mild, neutral conditions have been investigated. While the 2-bromobenzyloxy ethers were prepared in 62–65% yields by the alkylation of 4-hydroxy-1-phenyl-1,8-naphthyridin-2(1H)-one with 2-bromobenzyl bromides in refluxing acetone in the presence of anhydrous potassium carbonate, the sulfides were derived from 4-mercapto-1-phenyl-1,8-naphthyridin-2(1H)-one and 2-bromobenzyl bromides in 82–84% yields by a phase-transfer catalysis (PTC) reaction. The corresponding sulfones were prepared by treatment of the sulfides with m-CPBA in refluxing dichloromethane. The ethers, sulfides, and the sulfones were treated with ⁿ Bu₃SnH-AIBN to give regioselectively 1,8-naphthyridinone-annulated oxygen and sulfur heterocycles in 70–78% yields.     

Preclusion of nano scale self-assembly in block-selective non-aqueous solvents for rod–coil and coil–rod–coil macromolecular surfactants based on perylene tetracarboxylic diimide

Self-assembly of amphiphilic molecules ranging from simple surfactants to block copolymers in a solvent depends on one part of the molecule (one block in block copolymers) being soluble, and the other not. The aggregation of the insoluble segment in the block-selective solvent leads to the self assembly. In this paper, we describe a system of amphiphilic rod–coil and coil–rod–coil molecules, which do not show self assembly in block-selective non-aqueous solvents. We prepared rod–coil molecules based on hydrophilic propylene oxide/ethylene oxide copolymer (PO–EO copolymer) (Jeffamine®) as the flexible segment and photo-conducting large aromatic perylenediimide (PTCDI) as the rod. PO–EO copolymer was attached either to one side of PTCDI (MJ–PTCDI) or both sides (DJ–PTCDI). The former can be considered an inverse macromolecular surfactant, since the tail is hydrophilic and the head is hydrophobic. The DJ–PTCDI is a pseudo Gemini surfactant. Because of the presence of the chromophore, UV–Vis and fluorescent spectra could be used to study the self assembly of these amphiphilic rod coil polymers in solution. PTCDI forms π-interaction mediated aggregates in aqueous solution and these are H-stacked in MJ–PTCDI and J-stacked in DJ–PTCDI. Variable temperature UV and NMR spectra show that the assembly is stable over a large temperature range in water. The aggregates are also stable up to a pH of 12. However, when a non-aqueous solvent is used, no aggregation occurs. This is attributed to the “solvation” of the π-system of the PTCDI. With the addition of water, such solvation seems to be interrupted and aggregation occurs when water becomes a major component. We find that the mole percentage of the aggregates in acetone/water mixtures increases almost linearly with the concentration of water, providing a route to control the extent of aggregation of the chromophores. Due to the long, waxy PO–EO copolymer, MJ–PTCDI and DJ–PTCDI do not show liquid crystalline behavior or nanorod morphology, which were seen with short side chains. The optical microscopy of the bulk material shows aggregated crystals of PTCDI in the waxy matrix, showing that even in the presence of PO–EO copolymer, the molecular assembly of PTCDI takes place in the bulk. Secondary assembly was seen, in that upon ageing of the aqueous solutions, the drop cast films show that the spherical aggregates one-dimensionally coalesced into long fibers. Although UV–Vis spectra indicated no aggregation in non-aqueous solvents, drop-cast films of these solutions show needle-like aggregates and Lego-like assemblies.     

Modification of mechanical and thermal property of chitosan–starch blend films

Chitosan–starch blend films (thickness 0.2 mm) of different composition were prepared by casting and their mechanical properties were studied. To improve the properties of chitosan–starch films, glycerol and mustard oil of different composition were used. Chitosan–starch films, incorporated with glycerol and mustard oil, were further modified with monomer 2-hydroxyethyl methacrylate (HEMA) using gamma radiation. The modified films showed improvement in both tensile strength and elongation at break than the pure chitosan–starch films. Water uptake of the films reduced significantly than the pure chitosan–starch film. Thermo gravimetric analysis (TGA) and dynamic mechanical analysis (DMA) showed that the modified films experience less thermal degradation than the pure films. Scanning electron microscopy (SEM) and FTIR were used to investigate the morphology and molecular interaction of the blend film, respectively.     

磁性壳聚糖复合微球的制备及其Cu~(2+)吸附性能

以球磨后的粉煤灰磁珠(MS)颗粒为磁核,通过溶胶凝胶法和反相微乳液法依次包覆SiO_2和壳聚糖(CS),制备了MS@SiO_2@CS磁性微球。利用扫描电镜及能量色散谱仪、热重分析仪、红外光谱仪、X射线衍射仪、振动样品磁强计对所得样品的结构和磁性进行了系统表征。结果表明,磁珠颗粒表面实现了逐层包覆,较均匀的分散于壳聚糖基体中,MS@SiO_2@CS微球的比饱和磁化强度可达7.04 emu·g~(-1)。Cu~(2+)离子吸附实验表明,所得磁性壳聚糖微球对Cu~(2+)具有良好的吸附能力,最大吸附量可达11.08 mg·g~(-1);而且可通过磁选法高效固液分离。吸附动力学研究表明,MS@SiO_2@CS微球对Cu~(2+)离子的吸附符合准二级动力学模型,以化学吸附为主。     

Synthesis,Characterization, and Reactivity of Novel 6H‐1,3,5‐Oxathiazine S,S‐Dioxides

A series of novel 6H‐1,3,5‐oxathiazine S,S‐dioxides were synthesized by the m‐CPBA oxidation (2.2 equiv) of 6H‐1,3,5‐oxathizines. The synthetic utilities of the newly synthesized cyclic sulfones were investigated. In a thermal condition, compounds 6H‐1,3,5‐oxathiazine S,S‐dioxides were found relatively stable, but Lewis acid‐induced thermal reaction afforded the corresponding amides. The plausible pathway to amides from 6H‐1,3,5‐oxathiazine S,S‐dioxides was also discussed in this account.     

VLPR study of the reaction Br + CH3CHO

The reaction \documentclass{article}\pagestyle{empty}\begin{document}${\rm Br} + {\rm CH}_3 {\rm CHO}\buildrel1\over\rightarrow{\rm HBr} + {\rm CH}_3 {\rm CO}$\end{document} has been studied by VLPR at 300 K. We find k₁ = 2.1 × 10¹² cm³/mol s in excellent agreement with independent measurements from photolysis studies. Combining this value with known thermodynamic data gives k_-1 = 1 × 10¹⁰ cm³/mol s. Observations of mass 42 expected from ketene suggest a rapid secondary reaction: in which step 2 is shown to be rate limiting under VLPR conditions and k₂ is estimated at 10^12.6 cm³/mol s from recent theoretical models for radical recombination. It is also shown that 0 ? E₁ ? 1.4 kcal/mol using theoretical models for calculation of A₁ and is probably closer to the lower limit. Reaction ?1 is negligible under conditions used.     

Structural studies of apatite-type oxide ion conductors doped with cobalt

A series of Co doped lanthanum silicate apatite-type phases, La9.83Si4.5Co1.5O26, La9.66Si5CoO26, La10Si5CoO26.5 and La8BaCoSi6O26, have been synthesised, and neutron diffraction, EXAFS and XANES used to investigate their structures in detail. All compositions were shown to possess the hexagonal apatite structure, and the results confirmed that cobalt can be doped onto both the La and Si sites within the structure depending on the starting composition. The Co doping is shown to cause considerable local distortions within the apatite structure. In the case of Si site doping two compositions showed anisotropic peak broadening, which has been attributed to incommensurate ordering of oxygen within the apatite channels.     

Observation of the effects of radially sheared electric fields on the suppression of turbulent vortex structures and the associated transverse loss in GAMMA 10

Vortexlike turbulent structures in hot-ion mode plasmas with several keV are observed in the case with a radially produced weak shear of electric fields E(r). However, a strong E(r) shear formation due to a high ion-confining potential phi(c) production clears up these vortices together with plasma-confinement improvement and disappearance of both drift-wave and turbulencelike Fourier spectral signals. These findings are based on three-time progress in phi(c) in comparison to phi(c) attained 1992-2002. The significant advance of phi(c) is well extended in line with proposed potential-formation physics scalings.     

Rheological microscopy: local mechanical properties from microrheology

We demonstrate how tracer microrheology methods can be extended to study submicron scale variations in the viscoelastic response of soft materials; in particular, a semidilute solution of lambda-DNA. The polymer concentration is depleted near the surfaces of the tracer particles, within a distance comparable to the polymer correlation length. The rheology of this microscopic layer alters the tracers' motion and can be precisely quantified using one- and two-point microrheology. Interestingly, we found this mechanically distinct layer to be twice as thick as the layer of depleted concentration, likely due to solvent drainage through the locally perturbed polymer structure.