An HPLC assay of hydroxyl radicals by the hydroxylation reaction of terephthalic acid

An HPLC assay for hydroxyl radicals is described. The hydroxyl radical was trapped by terephthalic acid (non-fluorescent), and 2-hydroxyl terephthalic acid (fluorescent) was quantitated by HPLC-fluorescence detection. At a terephthalic acid concentration of 4.25 mmol/L, the hydroxyl radical formed in the Fenton reaction was successfully assayed in the concentration range of hydrogen peroxide of 2.5-50 micro mol/L, where the concentration of Fe(II) was 50 micro mol/L. The fluorescence of 2-hydroxy terephthalate was stable at 24 h, and its detection limit by this method was 5 nmol/L (100 fmol).     

Structure and ethanol complexation of cyclic tetrasaccharide in aqueous solution studied by NMR and molecular mechanics

The structure and ethanol complexation of a cyclic tetrasaccharide (CTS) in aqueous solution were investigated by proton NMR spectroscopy and molecular mechanics calculations. Two glucose units, A and B, of CTS are alternatively bonded by alpha-1,3 and alpha-1,6 linkages. The overlapped signals of protons A5, A6S, A6R, B3, B6S and B6R were resolved by spectral simulations to determine their chemical shifts and vicinal coupling constants. All vicinal coupling constants except for the A5-A6 spin system are consistent with the dihedral angles in the X-ray crystal structure. Each of protons A5, A6S, and A6R in the two units of A is equivalent with respect to the chemical shift. The vicinal coupling constants of (3)J(5-6S) and (3)J(5-6R) for unit A are close to the average of two rotamers that are present in crystals. The intensities of cross-peaks in the rotating frame nuclear Overhauser effect spectroscopy (ROESY) spectrum were rather well correlated with the effective distances calculated for the X-ray structure and molecular mechanics structures calculated in vacuo and water, although they are slightly better correlated with molecular mechanics structure in vacuo than with the other structures. From the changes of the chemical shifts of several CTS protons with increasing ethanol concentration, it was suggested that adsorption sites of ethanol on the plate structure of CTS are protons B2 and B4 (site B) in the concave face side and protons A1 and A2 (site A) in the convex back side. The binding constants for sites A and B are 0.0061 and 0.0176 M(-1), respectively. These binding constants are much smaller than a value of 4.1 M(-1) for the ethanol-alpha-cyclodextrin complex.     

Intramolecular catalytic Friedel-Crafts reactions with allenyl cations for the synthesis of quinolines and their analogues

[reaction: see text] This paper describes a novel method to synthesize a quinoline backbone by incorporating allenyl cations into a catalytic intramolecular Friedel-Crafts reaction. The initial products were isomerized and aromatized upon treatment with acid and base, respectively, to give quinolines. The basic concept also proved to be promising for 1-benzazepine, 1-benzazocine, or isoquinoline synthesis.     

Concise synthesis of anti-HIV-1 active (+)-inophyllum B and (+)-calanolide A by application of (-)-quinine-catalyzed intramolecular oxo-Michael addition

(-)-Quinine-catalyzed intramolecular oxo-Michael addition (IMA) of 7-hydroxy-5-methoxy-8-tigloylcoumarins was developed for the enantioselective construction of 2,3-dimethyl-4-chromanone systems in the context of the asymmetric synthesis of anti-HIV-1 active Calophyllum coumarins. Combination of the IMA and MgI(2)-assisted demethylation of the 5-methoxy group along with isomerization of the formed chromanone systems as key steps successfully led to the concise synthesis of (+)-inophyllum B and (+)-calanolide A, possible candidates for AIDS drugs. Further examination of the asymmetric IMA with cinchona alkaloids lacking a methoxy group on the quinoline skeleton suggested the influence of the methoxy substituent on stereoselectivity at the stereogenic centers of the chromanone systems.     

XPS of oxygen atoms on Ag(111) and Ag(110) surfaces: Accurate study with SAC/SAC‐CI combined with dipped adcluster model

O1s core‐electron binding energies (CEBE) of the atomic oxygens on different Ag surfaces were investigated by the symmetry adapted cluster‐configuration interaction (SAC‐CI) method combined with the dipped adcluster model, in which the electron exchange between bulk metal and adsorbate is taken into account properly. Electrophilic and nucleophilic oxygens (O_elec and O_nuc) that might be important for olefin epoxidation in a low‐oxygen coverage condition were focused here. We consider the O1s CEBE as a key property to distinguish the surface oxygen states, and series of calculation was carried out by the Hartree–Fock, Density functional theory, and SAC/SAC‐CI methods. The experimental information and our SAC/SAC‐CI results indicate that O_elec is the atomic oxygen adsorbed on the fcc site of Ag(111) and that O_nuc is the one on the reconstructed added‐row site of Ag(110) and that one‐ and two‐electron transfers occur, respectively, to the O_elec and O_nuc adclusters from the silver surface. © 2013 Wiley Periodicals, Inc.     

Solution‐processable colorless polyimides derived from hydrogenated pyromellitic dianhydride with controlled steric structure

This work presents novel colorless polyimides (PIs) derived from 1R,2S,4S,5R‐cyclohexanetetracarboxylic dianhydride (H″‐PMDA). Isomer effects were also discussed by comparing with PI systems derived from conventional hydrogenated pyromellitic dianhydride, that is, 1S,2R,4S,5R‐cyclohexanetetracarboxylic dianhydride (H‐PMDA). H″‐PMDA was much more reactive with various diamines than H‐PMDA, and the former led to PI precursors with much higher molecular weights. The results can be explained from the quite different steric structures of these isomers. The thermally imidized H″‐PMDA‐based films were colorless regardless of diamines because of inhibited charge‐transfer interaction. In particular, the H″‐PMDA/4,4′‐oxydianiline system simultaneously achieved a very high T_g exceeding 300 °C, high toughness (elongation at break > 70%), and good solution processability. In contrast, the H‐PMDA‐based counterparts were essentially insoluble. The outstanding solubility of the former probably results from disturbed chain stacking by its nonplanar steric structure. An advantage of chemical imidization process is also proposed. In some cases, a copolymerization approach with an aromatic tetracarboxylic dianhydride was effective to improve the thermal expansion property. The results suggest that the H″‐PMDA‐based PI systems can be promising candidates for novel high‐temperature plastic substrate materials in electronic paper displays. A potential application as optical compensation film materials in liquid crystal displays (LCD) is also proposed in this work. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Application of proton induced X-ray emission to the qualitative and quantitative analysis of iodine in biological samples

Particle-induced X-ray emission (PIXE) was applied to evaluate the loss of volatile elements such as iodine in biological samples. The analytical quality of the method is comparable or better than spectrophotometry, which is currently believed to be the most reliable for iodine determination. The temperature dependence of volatility loss of trace iodine was characteristic, and the feature was divided into three temperature regions. The first one, ranging from room temperature to 200 °C, showed only a slight loss below 20% on drying; the second stage, between 200 °C and 350 °C, where carbonizing processes became prominent, showed a remarkable loss up to 50%; the last one, beyond 350 °C, was accompanied by a considerable loss of iodine (more than 80%) with ashing. Even in the analysis using low temperature ashing with oxygen plasma, the loss of iodine observed was considerable (nearly 80%). The significance of these findings by PIXE in trace analysis is noted to improve analytical quality of volatile elements, such as iodine in biological, medical and also environmental fields.     

Ligand Substitution Reaction of Bis(ethylenediamine)glycinatocobalt(III) Complex with Ethylenediamine Catalyzed by the Photo-excited Tris(2,2′-bipyridine)ruthenium(II) Complex

Substitution reaction with ethylenediamine of coordinated glycinate ligand in bis(ethylenediamine)-glycinatocobalt(III) complex has been studied in the presence of photo-excited tris(2,2′-bipyridine)ruthenium(II) complex in alkaline aqueous solution (buffered around pH 12) containing 1.0M chloride ion at 25°C. VIS absorption and CD spectra were used for the racemate and the optically active isomers of the Co(III) complexes, respectively. The reaction was catalyzed by the excited Ru(II) complex to give tris(ethylenediamine)cobalt(III) complex. Mechanism of the ligand-substitution reaction and role of the excited Ru(II) complex were discussed.