Formation of polyketone particle structure by hexafluoroisopropanol solvent evaporation and effects of plasticizer addition

Few solvents are capable of dissolving polyketones (PKs). 1,1,1,3,3,3‐Hexafluoro‐2‐propanol (hexafluoroisopropanol, HFIP) is a better solvent than trifluoroethanol and m‐cresol. When HFIP was evaporated from a PK/HFIP solution, a porous cast‐film with a microparticle structure was formed because the isotactic PKs adopted a helical conformation, and convection during evaporation of the high polarity and low‐boiling‐point HFIP caused aggregation and rolling of the polymer molecules. The addition of plasticizer suppressed particle formation, improving the surface structure and mechanical properties of the film. In particular, the dielectric properties of the film improved significantly. This will enable PKs, which are rigid insulating materials, to be used as dielectric materials, broadening their range of applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 887–892     

Radiation-induced polymerization of 3-octylthiophene

In order to develop a new synthetic method and to study mechanism of oxidative polymerization of conducting polymers, polymerization of 3-octylthiophene in several organic solvents by γ-irradiation was examined. Polymers bimodal distribution with molecular weights at 500–1000 and 2000–3000 were generated by the irradiation of chloroform solutions. The values of monomer conversion (G(?M)) decreased from 445 to 10 with doses from 0.99 kGy to 594 kGy. The large G(?M) values and dose dependence of G(?M) cannot be explained with widely accepted mechanism for electrochemical polymerization or chemical oxidative polymerization. Another mechanism, which proceeds through chain reactions, is proposed. This mechanism explains the large G(?M) and the dependence on the dose.     

A classification result for biminimal Lagrangian surfaces in complex space forms

We classify biminimal Lagrangian surfaces in complex space forms under the condition that the integral curves of Maslov vector field are geodesics.     

Regioselective Alkylation of Thiazolylsulfonamides: Direct and Efficient Synthesis of 3‐Alkylthiazolidene Derivatives

Various N‐3‐alkylated thiazolidenesulfonamide derivatives were efficiently prepared by the direct endo‐selective alkylation of thiazolylsulfonamides. The effects of different bases and solvents were investigated, and the NaH–THF combination was found to be the most effective at conferring high yields and endo‐selectivity.     

Nonylphenol Polyethoxylates Degraded by Three Different Wavelengths of UV and Their Genotoxic Change—Detected by Generation of γ‐H2AX

UV rays in sunlight are an important factor in the degradation of chemicals. In this study, we investigated the degradation of nonionic surfactants, nonylphenol polyethoxylates (NPEOs) with 10 or 70 ethylene oxide (EO) units using UVA, B and C, and their genotoxic change based on phosphorylation of histone H2AX (γ‐H2AX), a marker of DNA damage. NPEOs were degraded dependent on the energy of UV, that is, UVC having the highest energy was most effective, whereas UVA having the lowest energy caused little change. The EO side chain of NPEO(70) was broken near the benzene ring by UV, producing NPEOs with a shortened EO chain (around 10 units). The generation of γ‐H2AX reflected the pattern of degradation; shortening of the EO chain changed NPEO(70) into an inducer for γ‐H2AX, and degradation of NPEO(10) attenuated the genotoxicity. The γ‐H2AX generated by NPEO(10) and UV‐degraded NPEO(70) was independent of the cell cycle. The formation of DNA double strand breaks detected by gel electrophoresis was consistent with the results for γ‐H2AX. These results suggested that UV rays can make NPEOs harmless or genotoxic according to the degradation of the EO side chain, the effects being dependent on wavelength.     

Hemin-adsorbed carbon felt for sensitive and rapid flow-amperometric detection of dissolved oxygen

Hemin was physically adsorbed onto porous carbon felt (CF), a microelectrode ensemble of micro-carbon fiber (ca. 7 μm in diameter) and possessing a three-dimensional random structure. The hemin-CF exhibited a well-defined redox wave that is due to Fe(III)/Fe(II) redox process in hemin, with a formal potential of ?0.32 V (vs. Ag/AgCl) in deoxygenated buffer solution of pH 7.0. The surface coverage of the electroactive hemin molecules on the surface of the CF was calculated to be 5.0?×?10^?11 mol cm^?2, and the apparent heterogeneous electron transfer rate constant is 3.35 s^?1. The hemin-CF electrode displays excellent electrocatalytic activity for the reduction of dissolved oxygen (DO), and the magnitude of the cathodic current increases with increasing concentrations of DO in the sample solution. The electrode was used as a flow-through detector for sensitive and rapid consecutive determination of DO. Deoxygenated pH 7.0 solutions were analyzed at a flow rate of 8.0 mL min^?1 at an applied potential of ?0.2 V, and highly reproducible cathodic peak current responses to DO were observed in the 0.72 to 13.3 mg L^?1 concentration range. The maximum throughput is 170 samples h^?1. The hemin-CF-based amperometric flow-sensor was applied to determine the concentration of DO in environmental water samples.

Improved synthesis of (R)-7-hydroxycarvone from (S)-α-pinene

A three-step synthesis of (R)-7-hydroxycarvone (1), which is anticipated to be a valuable building block for the versatile preparation of natural products, is described. Optimization of the reaction conditions for photooxygenation and migration of (S)-α-pinene 2, tetrapropylammonium perruthenate (TPAP) oxidation of the generated alcohol, and a subsequent ring-opening reaction in the presence of Cu(OTf)₂ led to the synthesis of 1 with good reproducibility. The desired product 1 was thus obtained in 46% yield over three steps.     

A Pd(II)-hydroxyporphycene: synthesis, characterization, and photoinduced proton-coupled electron transfer

A Pd(II) complex, Pd(TPrPc-OH) (1, TPrPc-OH = 9-hydroxy-2,7,12,17-tetrapropylporphycenato dianion), has been synthesized and characterized. ¹H NMR spectroscopy revealed that compound 1 exists as its enol form in solution. The H atom of the hydroxy group in 1 was exchanged with deuterium on addition of ethanol-d ₆. UV–visible spectra showed a red shift of the Q band of 1 in THF compared with that of the acetoxy derivative Pd(TPrPc-OAc) (2, TPrPc-OAc = 9-acetoxy-2,7,12,17-tetrapropylporphycenato dianion). The pK _a value of the hydroxy group in 1 was determined, by means of a UV–visible titration experiment, to be 10.56. A cyclic voltammogram of 1 in a mixture of THF and Britton–Robinson buffered aqueous solution revealed one-electron and one-proton coupled transfer in the oxidation process in the pH range from 2.7 to 10.5, which was identified by pH-varying experiments and the Pourbaix diagram. Transient absorption spectroscopy revealed that an electron-transfer reaction occurred from the triplet excited-state of 1 to 2,3,5,6-tetramethyl-1,4-benzoquinone (duroquinone, DQ) upon pulse laser irradiation at 532 nm. Such an intermolecular photoinduced electron-transfer reaction was not observed between the Ni analog, Ni(TPrPc-OH), and DQ. The reaction rate constant, k _q, was indicative of a kinetic isotope effect with k _q(H)/k _q(D) = 1.7, supporting the belief that the exited-state electron transfer from 1 to DQ is accompanied by proton transfer.