Synthesis and structural,electrochemical, and optical properties of Ru(II) complexes with azobis(2,2'-bipyridine)s

Two new ditopic ligands, 5,5"-azobis(2,2'-bipyridine) (5,5"-azo) and 5,5"-azoxybis(2,2'-bipyridine) (5,5"-azoxy), were prepared by the reduction of nitro precursors. Mononuclear and dinuclear Ru(II) complexes having one of these bridging ligands and 2,2'-bipyridine terminal ligands were also prepared, and their properties were compared with previously reported Ru(II) complexes having 4,4"-azobis(2,2'-bipyridine) (4,4"-azo). The X-ray crystal structure showed that 5,5"-azo adopts the trans conformation and a planar rodlike shape. The X-ray crystal structure of [(bpy)(2)Ru(5,5"-azo)Ru(bpy)(2)](PF(6))(4) (Ru(5,5"-azo)Ru) showed that the bridging ligand is in the trans conformation and nearly planar also in the complex and the metal-to-metal distance is 10.0 A. The azo or azoxy ligand in these complexes exhibits reduction processes at less negative potentials than the terminal bpy's due to the low-lying pi level. The electronic absorption spectra for the complexes having 5,5"-azo or 5,5"-azoxy exhibit an extended low-energy metal-to-ligand charge-transfer absorption. The ligands, 5,5"-azo and 5,5"-azoxy, and the mononuclear complex, [(bpy)(2)Ru(5,5"-azo)](2+), isomerize reversibly upon light irradiation. The low-energy MLCT state sensitizes the isomerization of the azo moiety in this complex. While [(bpy)(2)Ru(4,4"-azo)Ru(bpy)(2)](PF(6))(4) exhibits light switch properties, namely, significant electrochromism and a large luminescence enhancement, upon reduction, Ru(5,5"-azo)Ru does not show these properties. The radical anion formation upon reduction of these complexes has been confirmed by ESR spectroscopy.     

Development of a chemical vapor sensor using piezoelectric quartz crystals with coated unusual lipids

Piezoelectric quartz crystal sensors were developed using lipids with various properties for highly sensitive detection of chemical vapors. Lipids with varying lengths of alkyl chains were coated onto 10 MHz AT-cut quartz crystal resonators and the response of these modified crystals to chemical vapors were measured. It was shown that hydrophilic compounds, such as ethanol and methanol, could be recognized efficiently by lipids having shorter alkyl chains, whereas lipids with longer alkyl chains showed affinity to more hydrophobic vapors, such as toluene, hexane and cyclohexane. Frequency changes caused by adsorption of alcohols could be enhanced when cholesterol was co-immobilized in the lipid layer. To confirm the assumption that the sensor-response might be affected by the properties of lipids derived from acyl chains, we have examined the effects of two types of newly synthesized unusual lipids on sensor response. When lipids having one triple bond each at different positions on their alkyl chains were coated onto quartz crystals separately, lower responses were observed compared to responses obtained for a sensor with immobilized, saturated phosphatidylcholine. Lipids containing -branched acyl chains, however, showed good affinity for organic vapors, and sensor responses improved 4–5-fold. Moreover, these sensors were shown to have sensitivity of the same order as the humans' sense of smell (10⁻⁵–10⁻⁶ w/w in liquid paraffin) when measured using standard odorants (isovaleric acid, skatole, etc.) for an olfactometry established in Japan.     

Application of plasma-polymerized films for isoelectric focusing of proteins in a capillary electrophoresis chip

The first use of plasma polymerization technique to modify the surface of a glass chip for capillary isoelectric focusing (cIEF) of different proteins is reported. The electrophoresis separation channel was machined in Tempax glass chips with length 70 mm, 300 microm width and 100 microm depth. Acetonitrile and hexamethyldisiloxane monomers were used for plasma polymerization. In each case 100 nm plasma polymer films were coated onto the chip surface to reduce protein wall adsorption and minimize the electroosmotic flow. Applied voltages of 1000 V, 2000 V and 3000 V were used to separate mixtures of cytochrome c (pI 9.6), hemoglobin (pI 7.0) and phycocyanin (pI 4.65). Reproducible isoelectric focusing of each pI marker protein was observed in different coated capillaries at increasing concentration 2.22-5 microg microL(-1). Modification of the glass capillary with hydrophobic HMDS plasma polymerized films enabled rapid cIEF within 3 min. The separation efficiency of cytochrome c and phycocyanin in both acrylamide and HMDS coated capillaries corresponded to a plate number of 19600 which compares favourably with capillary electrophoresis of neurotransmitters with amperometric detection.     

Novel asymmetric through-hole array microfabricated on a silicon plate for formulating monodisperse emulsions

We have proposed a novel microchannel (MC) structure for formulating monodisperse emulsions. The emulsification device is a silicon array of microfabricated, asymmetric through-holes with a slit and a circular channel (an asymmetric straight-through MC). The asymmetric through-holes of a uniform size stably yielded monodisperse emulsions with average droplet diameters of 35-41 mum and coefficients of variation of less than 2% by forcing the to-be-dispersed phase into the continuous phase via the through-holes. Their asymmetry enabled the stable formation of monodisperse emulsion droplets by spontaneous transformation, even using a to-be-dispersed phase with a very low viscosity below 1 mPa s. Additionally, the asymmetric straight-through MC with a high-density through-hole layout has the potential for high-throughput formulation of monodisperse emulsions.     

Novel aggregation of [Ni(thiolato)2(amine)2]-type square planes assisted by silver(I) ions

Treatment of [Ni(L)][L =((-)SCH(2)CH(2)NH[double bond, length as m-dash]C(CH(3))-)(2)] with Ag(+) in water gave a pinwheel-like S-bridged Ni(II)(3)Ag(I)(2) structure in [Ag(2)[Ni(L)](3)](2+), which further reacted with [Ni(L)] to produce a Ni(II)(4)Ag(I)(2) structure in [Ag(2)[Ni(L)](4)](2+) and a Ni(II)(7)Ag(I)(4) structure in [Ag(4)[Ni(L)](7)](4+).     

EFFECTS OF EXTRACELLULAR Ca2+ CONCENTRATION AND PAPAVERINE ON THE VISUAL CELL FUNCTION IN THE ISOLATED FROG RETINA

Abstract— Effects of extracellular Ca²⁺ concentration and papaverine on the PIII response of the electroretinogram and the dark adaptation process of the visual cells were studied in the isolated, aspartate-treated bullfrog retina. The amplitudes of both the fast and slow PIII responses are increased in 0.01 m M Ca²⁺ solution, but decreased in Ca²⁺-free solution containing 1 m M EDTA. The application of 0.1 m M papaverine in the presence of 1 m M Ca²⁺ led to the enhancement of the slow PIII response at lower stimulus intensity and the prolongation of the slow PIII response, but these effects of papaverine on the response were lost when Ca²⁺ was removed from the bathing fluid. The half-time of recovery of the fast PIII response amplitude after switching off the adapting light was a linear function of the amount of bleached rhodopsin. Papaverine in the absence of Ca²⁺ produced about 2-fold increase in the half-time of recovery of the response. These findings suggest that chemical reactions which are sensitive to papaverine in the absence of Ca²⁺ are implicated in the dark adaptation process of the visual cells.     

Preparation of Gd(2)O(3) : Eu(3+) and Gd(2)O(2)S : Eu(3+) phosphor fine particles using an emulsion liquid membrane system

Size- (submicrometer-sized) and morphology- (spherical) controlled composite Gd-Eu oxalate particles were prepared in an emulsion liquid membrane (water-in-oil-in-water emulsion) system. The oxalate particles thus prepared were calcined in air to obtain Gd(2)O(3) : Eu(3+) phosphor particles and in sulfur atmosphere to obtain Gd(2)O(2)S : Eu(3+) phosphor particles. These submicrometer-sized spherical phosphor particles showed photoluminescence properties with emission peak at 614 nm for Gd(2)O(3) : Eu(3+) and 628 nm for Gd(2)O(2)S : Eu(3+).     

Magnetic/Conducting Hybrid Compound Composed of 1-D Chain [Mn2Cl5(EtOH)]∞ and BEDT-TTF Stacking Layer

An assembled compound (BEDT-TTF)₂[Mn₂Cl₅(EtOH)] (1) consisting of two structural lattices of Mn(II)-Cl one-dimensional (1-D) chains and bis(ethylenedithio)tetrathiafulvalene (BEDT-TTF) stacking layers was synthesized by electrochemical crystallization. Compound 1 crystallized in triclinic space group P-1 (#2) with a=13.1628(5) Å, b=20.3985(9) Å, c=7.4966(3) Å, α=98.3498(8)°, β=104.980(1)°, γ=74.602(2)°, V=1868.3(1) ų, and Z=2. The 1-D chains and the stacking layers are aligned along the c-axis of the unit cell. The 1-D chain is described as [Mn₂Cl₅(EtOH)]_∞⁻ in which two Mn(II) ions and four Cl⁻ ions form a ladder-like chain with Kagomé (cuboidal) sublattices, and the remaining Cl⁻ ion and an ethanol molecule cap the edge-positioned Mn(II) ions of the chains. The BEDT-TTF molecules are packed between the Mn-Cl chains (ac-plane), the intermolecular S·S contacts of which are approximately found in the range 3.440(2)-3.599(2) Å. The packing feature of BEDT-TTF molecules is very similar to that of (BEDT-TTF)₂ClO₄(TCE)_0.5 (TCE=1,1,2-trichloroethane) (J. Am. Chem. Soc., 105, 297 (1983)). Regarding the electronic state of each BEDT-TTF molecule, Raman spectroscopic analysis and ESR study revealed the presence of half-valence BEDT-TTF molecules (charge delocalization) in 1. Magnetic measurements clearly demonstrated that the paramagnetic spins on the 1-D chain [Mn₂Cl₅(EtOH)]_∞⁻ arrange antiferromagnetically in the low-temperature region. Additionally, 1 exhibits metallic conductivity in the temperature range 2.0-300 K (σ=21 S cm⁻¹ at 300 K and 1719 S cm⁻¹ at 2.0 K), due to the contribution of the stacked BEDT-TTFs. Consequently, these peculiarities that correspond to antiferromagnetic/metallic conductivity demonstrate the “bi-functionality” of 1.     

Convergent synthesis of the A-F ring segment of yessotoxin and adriatoxin

A convergent synthesis of the A-F ring segment of yessotoxin and adriatoxin was achieved via the intramolecular allylation of an α-chloroacetoxy ether and subsequent ring-closing metathesis.     

CFD simulation and analysis of emulsion droplet formation from straight-through microchannels

We recently proposed a technique for preparing monodisperse emulsions with a coefficient of variation below 5% from a silicon array of micrometer-sized channels perpendicular to the plate surface, named a straight-through microchannel (MC). This study involved three-dimensional computational fluid dynamics (CFD) simulations to calculate the formation of an oil-in-water (O/W) emulsion droplet from straight-through MCs with circular and elliptic cross sections. The CFD results demonstrated that the oil phase that passed through the elliptic MCs exceeding a threshold aspect ratio between 3 and 3.5 was cut off spontaneously into a small droplet with a diameter of approximately 40 microm. Sufficient space for water at the channel exit had to be maintained for successful droplet formation. The formation and shrinkage of a neck inside the channel caused an increased pressure difference inside the channel and an increased velocity value near the neck. The pressure and velocity values at the neck drastically changed, and the neck was cut off instantaneously just before the completion of droplet formation. This process was triggered by a gradually increased pressure difference between the circular neck and inflating oil phase. The findings obtained in this paper provide useful numerical and visual information about the droplet formation phenomena from the straight-through MCs. The CFD results were verified by the experimental results, showing that the CFD approach can help design a suitable channel structure.