Magnetic/Conducting Hybrid Compound Composed of 1-D Chain [Mn2Cl5(EtOH)]∞ and BEDT-TTF Stacking Layer

An assembled compound (BEDT-TTF)₂[Mn₂Cl₅(EtOH)] (1) consisting of two structural lattices of Mn(II)-Cl one-dimensional (1-D) chains and bis(ethylenedithio)tetrathiafulvalene (BEDT-TTF) stacking layers was synthesized by electrochemical crystallization. Compound 1 crystallized in triclinic space group P-1 (#2) with a=13.1628(5) Å, b=20.3985(9) Å, c=7.4966(3) Å, α=98.3498(8)°, β=104.980(1)°, γ=74.602(2)°, V=1868.3(1) ų, and Z=2. The 1-D chains and the stacking layers are aligned along the c-axis of the unit cell. The 1-D chain is described as [Mn₂Cl₅(EtOH)]_∞⁻ in which two Mn(II) ions and four Cl⁻ ions form a ladder-like chain with Kagomé (cuboidal) sublattices, and the remaining Cl⁻ ion and an ethanol molecule cap the edge-positioned Mn(II) ions of the chains. The BEDT-TTF molecules are packed between the Mn-Cl chains (ac-plane), the intermolecular S·S contacts of which are approximately found in the range 3.440(2)-3.599(2) Å. The packing feature of BEDT-TTF molecules is very similar to that of (BEDT-TTF)₂ClO₄(TCE)_0.5 (TCE=1,1,2-trichloroethane) (J. Am. Chem. Soc., 105, 297 (1983)). Regarding the electronic state of each BEDT-TTF molecule, Raman spectroscopic analysis and ESR study revealed the presence of half-valence BEDT-TTF molecules (charge delocalization) in 1. Magnetic measurements clearly demonstrated that the paramagnetic spins on the 1-D chain [Mn₂Cl₅(EtOH)]_∞⁻ arrange antiferromagnetically in the low-temperature region. Additionally, 1 exhibits metallic conductivity in the temperature range 2.0-300 K (σ=21 S cm⁻¹ at 300 K and 1719 S cm⁻¹ at 2.0 K), due to the contribution of the stacked BEDT-TTFs. Consequently, these peculiarities that correspond to antiferromagnetic/metallic conductivity demonstrate the “bi-functionality” of 1.     

Convergent synthesis of the A-F ring segment of yessotoxin and adriatoxin

A convergent synthesis of the A-F ring segment of yessotoxin and adriatoxin was achieved via the intramolecular allylation of an α-chloroacetoxy ether and subsequent ring-closing metathesis.     

CFD simulation and analysis of emulsion droplet formation from straight-through microchannels

We recently proposed a technique for preparing monodisperse emulsions with a coefficient of variation below 5% from a silicon array of micrometer-sized channels perpendicular to the plate surface, named a straight-through microchannel (MC). This study involved three-dimensional computational fluid dynamics (CFD) simulations to calculate the formation of an oil-in-water (O/W) emulsion droplet from straight-through MCs with circular and elliptic cross sections. The CFD results demonstrated that the oil phase that passed through the elliptic MCs exceeding a threshold aspect ratio between 3 and 3.5 was cut off spontaneously into a small droplet with a diameter of approximately 40 microm. Sufficient space for water at the channel exit had to be maintained for successful droplet formation. The formation and shrinkage of a neck inside the channel caused an increased pressure difference inside the channel and an increased velocity value near the neck. The pressure and velocity values at the neck drastically changed, and the neck was cut off instantaneously just before the completion of droplet formation. This process was triggered by a gradually increased pressure difference between the circular neck and inflating oil phase. The findings obtained in this paper provide useful numerical and visual information about the droplet formation phenomena from the straight-through MCs. The CFD results were verified by the experimental results, showing that the CFD approach can help design a suitable channel structure.     

An iterative type I polyketide synthase PKSN catalyzes synthesis of the decaketide alternapyrone with regio-specific octa-methylation

A biosynthetic gene cluster containing five genes, alt1-5, was cloned from Alternaria solani, a causal fungus of early blight disease to tomato and potato. Homology searching indicated that the alt1, 2, and 3 genes code for cytochrome P450s and the alt4 gene for a FAD-dependent oxygenase/oxidase. The alt5 gene encodes a polyketide synthase (PKS), named PKSN, that was found to be an iterative type I complex reduced-type PKS with a C-methyltransferase domain. To identify the PKSN function, the alt5 gene was introduced into the fungal host Aspergillus oryzae under an alpha-amylase promoter. The transformant produced a polyketide compound, named alternapyrone, whose structure is shown to be 3,5-dimethyl-4-hydroxy-6-(1,3,5,7,11,13-hexamethyl-3,5,11-pentadecatrienyl)-pyran-2-one. Labeling experiments confirmed that alternapyrone is a decaketide with octa-methylation from methionine on every C(2) unit except the third unit.     

Palladium-catalyzed preparation of α-allyl esters and α,β-unsaturated esters from saturated esters via their silyl acetals

Reaction of ketene silyl acetals with allylic carbonates in the presence of palladium-phosphine catalyst in dioxane gives α-allyl esters in high yields. When the reaction is carried out with phosphine-free palladium catalyst in nitriles, α,β-unsaturated esters are obtained in good yields.     

Induction of a remarkable conformational change in a human telomeric sequence by the binding of naphthyridine dimer: inhibition of the elongation of a telomeric repeat by telomerase

The binding of a dimeric form of the 2-amino-1,8-naphthyridine derivative (naphthyridine dimer) to a human telomeric sequence, TTAGGG, was investigated by UV melting, CD spectra, and CSI-MS measurements. Both the 9-mer d(TTAGGGTTA) and the 15-mer d(TTAGGGTTAGGGTTA) showed apparent melting temperatures (T(m)) of 45.6 and 63.6 degrees C, respectively, in the presence of naphthyridine dimer (30 microM) in sodium cacodylate buffer (50 mM, pH 7.0) containing 100 mM NaCl. The CD spectra at 235 and 255 nm of the 9-mer increased in intensity accompanied with strong induced CDs at 285 and 340 nm upon complex formation with naphthyridine dimer. UV titration of the binding of naphthyridine dimer to the 9-mer at 320 nm showed a hypochromism of the spectra. A Scatchard plot of the data showed the presence of multiple binding sites with different association constants. Cold spray ionization mass spectrometry of the complex between naphthyridine dimer and the 9-mer clearly showed that one to three molecules of the ligand bound to the dimer duplex of the 9-mer. Telomeric repeat elongation assay showed that the binding of naphthyridine dimer to the telomeric sequence inhibits the elongation of the sequence by telomerase.     

Two-dimensional infrared (2D IR) spectroscopy. A new tool for interpreting infrared spectra

Two-dimensional infrared (2D IR) spectroscopy is used to study atactic polystyrene. 2D IR is a technique based on time-resolved detection of IR signals in response to an external perturbation, such as mechanical strain. Since different chemical functional groups respond to the applied perturbation at unique and often different rates, characteristic time-dependent variations of the IR-band intensities are observed. Correlation analysis of the dynamic variation of the IR signals yields a new spectrum defined by two independent wave numbers. Peaks located on a 2D IR spectral plane imply interactions and connectivities among chemical functional groups. By spreading convoluted IR bands over two dimensions, the spectral resolution is also greatly enhanced.     

Catalytic enantioselective synthesis of atropisomeric 2-aryl-4-quinolinone derivatives with an N–C chiral axis

In the presence of an (R)-MOP-Pd₂(dba)₃ catalyst, the reaction of ortho-tert-butylaniline with 2-bromophenyl arylethynyl ketone proceeded via a tandem amination (1,4-addition of aniline to an ynone and subsequent intramolecular Buchwald–Hartwig amination) to afford axially chiral N-(2-tert-butylphenyl)-2-aryl-4-quinolinone derivatives with moderate enantioselectivity (up to 72% ee).     

Phase-Separation Phenomena of Copolymer Solutions and Fractionation of Copolymers by Chemical Composition

Precipitation temperature-total polymer concentration diagrams for toluene solutions of two styrene-acrylonitrile copolymers different in chemical composition and their mixtures were determined and then triangular phase diagrams of this system were constructed from these diagrams. It is speculated from the triangular phase diagrams and experimentally shown that the copolymer may be effectively fractionated by chemical composition in this system.     

High magnetic field solid‐state NMR analyses by combining MAS,MQ‐MAS,homo‐nuclear and hetero‐nuclear correlation experiments

A general strategy of structural analysis of alumina silicate by combining various solid‐state NMR measurements such as single pulse, multi‐quantum magic angle spinning, double‐quantum homo‐nuclear correlation under magic angle spinning (DQ‐MAS), and cross‐polarization hetero‐nuclear correlation (CP‐HETCOR) was evaluated with the aid of high magnetic field NMR (800 MHz for ¹H Larmor frequency) by using anorthite as a model material. The high magnetic field greatly enhanced resolution of ²⁷Al in single pulse, DQ‐MAS, and even in triple‐quantum magic angle spinning NMR spectra. The spatial proximities through dipolar couplings were probed by the DQ‐MAS methods for homo‐nuclear correlations between both ²⁷Al–²⁷Al and ²⁹Si–²⁹Si and by CP‐HETCOR for hetero‐nuclear correlations between ²⁷Al–²⁹Si in the anorthite framework. By combining various NMR methodologies, we elucidated detailed spatial correlations among various aluminum and silicon species in anorthite that was hard to be determined using conventional analytical methods at low magnetic field. Moreover, the presented approach is applicable to analyze other alumina‐silicate minerals. Copyright © 2012 John Wiley & Sons, Ltd.