Synthesis, characterization, and photochemical properties of azobenzene-conjugated Ru(II) and Rh(III) bis(terpyridine) complexes

We synthesized azobenzene-conjugated bis(terpyridine) Ru(II) and Rh(III) mononuclear and dinuclear complexes and investigated their photochemical properties on excitation of the azo pi-pi band upon 366 nm light irradiation. The Ru mononuclear complex underwent trans-to-cis photoisomerization to reach the photostationary state with only 20% of the cis form, while the Ru dinuclear complex did not isomerize at all photochemically. On the other hand, the mononuclear and dinuclear Rh complexes showed almost complete trans-to-cis photoisomerization behavior. Cis forms of the Rh complexes thermally returned to the trans form at a much slower rate than those of organic azobenzenes, but they did not isomerize photochemically. The reduction potential of the cis forms was 80 mV more negative than that of the trans forms. The photoisomerization quantum yields of the Rh complexes were strongly dependent on the polarity, viscosity, and donor site of the solvents as well as the size of the counterions. We investigated the photoisomerization process of these complexes using femtosecond absorption spectroscopy. For the Rh complexes, we observed S(n) <-- S(2) and S(n) <-- S(1) absorption bands similar to those of organic azobenzenes. For the Ru complexes, we observed very fast bleaching of the MLCT band of the Ru complex, which indicated that the energy transfer pathway to the MLCT was the primary cause of the depressed photoisomerization. The electronic structures, which were estimated from ZINDO molecular orbital calculation, supported the different photochemical reaction behavior between the Ru and Rh complexes.     

Crystal structures of V3S4 and V5S8

Crystal structures of the ordered phases of V₃S₄ and V₅S₈ were refined with single crystal data. Both are monoclinic. Chemical compositions, space groups and lattice constants are as follows: VS_1.47, $\text{I2}\text{m}$ (No. 12), a = 5.831(1), b = 3.267(1), c = 11.317(2)Å, β = 91.78(1)° and VS_1.64, $\text{F}\text{2}\text{m}$ (No. 12), a = 11.396(11), b = 6.645(7), c = 11.293(4), Å, β = 91.45(6)°. In both structures, short metal-metal bonds were found between the layers as well as within them. In comparison with the structure of Fe₇S₈, the stability of NiAs-type structure was discussed based on the detailed metal-sulfur distances.     

Ionic liquid crystal as a hole transport layer of dye-sensitized solar cells

Use of a new ionic liquid crystal, 1-dodecyl-3-methylimidazolium iodide, and iodine as an electrolyte of dye-sensitized solar cells leads to a high short circuit photocurrent density and a high light-to-electricity conversion efficiency, due to a self-assembled structure of the imidazolium cations, resulting in high conductivity of the electrolyte.     

Effects of type and physical properties of oil phase on oil-in-water emulsion droplet formation in straight-through microchannel emulsification, experimental and CFD studies

Straight-through microchannel (MC) emulsification is a novel technique for formulating monodisperse emulsions using an array of micrometer-sized channels vertical to the surface of a silicon plate (a straight-through MC). We studied the effects of the type and physical properties of the dispersed oil phase and of the surfactant concentration on droplet formation from a straight-through MC by experiments and computational fluid dynamics (CFD) simulations. Monodisperse oil-in-water emulsions with coefficients of variation below 4% were formulated from an oblong straight-through MC using silicone oils, tetradecane, medium-chain triglyceride, soybean oil, and liquid paraffin as the oil phase. At oil viscosities (eta(d)) lower than a threshold value of 100 mPa s, the values of the resultant droplet diameter (d(ex)) gradually decreased with increasing eta(d), whereas they were not affected by the surfactant concentration. Conversely, at eta(d) higher than the threshold value, the d(ex) values significantly increased with increasing eta(d), and they were affected by the surfactant concentration. An analysis on the basis of droplet formation time and interfacial tension clarified that the trends in d(ex) at eta(d) above the threshold value would be caused by the significant decrease in the dynamic interfacial tension during droplet formation. We thus discovered that the dynamic interfacial tension is also a parameter affecting the d(ex) along with eta(d) in straight-through MC emulsification. CFD simulations using a three-dimensional (3D) model including a straight-through MC confirmed successful formation of micrometer-sized droplets for the above-mentioned oils. The experimental and CFD results for the resultant droplet size were compared using the dimensionless droplet diameter (d, droplet diameter/channel equivalent diameter). The d(CFD) values agreed well with the d(ex) values at eta(d) below the threshold value of 100 mPa s for all the experiment systems and at eta(d) above the threshold value for the experiment systems that did not contain a surfactant.     

Synthesis and structural,electrochemical, and optical properties of Ru(II) complexes with azobis(2,2'-bipyridine)s

Two new ditopic ligands, 5,5"-azobis(2,2'-bipyridine) (5,5"-azo) and 5,5"-azoxybis(2,2'-bipyridine) (5,5"-azoxy), were prepared by the reduction of nitro precursors. Mononuclear and dinuclear Ru(II) complexes having one of these bridging ligands and 2,2'-bipyridine terminal ligands were also prepared, and their properties were compared with previously reported Ru(II) complexes having 4,4"-azobis(2,2'-bipyridine) (4,4"-azo). The X-ray crystal structure showed that 5,5"-azo adopts the trans conformation and a planar rodlike shape. The X-ray crystal structure of [(bpy)(2)Ru(5,5"-azo)Ru(bpy)(2)](PF(6))(4) (Ru(5,5"-azo)Ru) showed that the bridging ligand is in the trans conformation and nearly planar also in the complex and the metal-to-metal distance is 10.0 A. The azo or azoxy ligand in these complexes exhibits reduction processes at less negative potentials than the terminal bpy's due to the low-lying pi level. The electronic absorption spectra for the complexes having 5,5"-azo or 5,5"-azoxy exhibit an extended low-energy metal-to-ligand charge-transfer absorption. The ligands, 5,5"-azo and 5,5"-azoxy, and the mononuclear complex, [(bpy)(2)Ru(5,5"-azo)](2+), isomerize reversibly upon light irradiation. The low-energy MLCT state sensitizes the isomerization of the azo moiety in this complex. While [(bpy)(2)Ru(4,4"-azo)Ru(bpy)(2)](PF(6))(4) exhibits light switch properties, namely, significant electrochromism and a large luminescence enhancement, upon reduction, Ru(5,5"-azo)Ru does not show these properties. The radical anion formation upon reduction of these complexes has been confirmed by ESR spectroscopy.     

Development of a chemical vapor sensor using piezoelectric quartz crystals with coated unusual lipids

Piezoelectric quartz crystal sensors were developed using lipids with various properties for highly sensitive detection of chemical vapors. Lipids with varying lengths of alkyl chains were coated onto 10 MHz AT-cut quartz crystal resonators and the response of these modified crystals to chemical vapors were measured. It was shown that hydrophilic compounds, such as ethanol and methanol, could be recognized efficiently by lipids having shorter alkyl chains, whereas lipids with longer alkyl chains showed affinity to more hydrophobic vapors, such as toluene, hexane and cyclohexane. Frequency changes caused by adsorption of alcohols could be enhanced when cholesterol was co-immobilized in the lipid layer. To confirm the assumption that the sensor-response might be affected by the properties of lipids derived from acyl chains, we have examined the effects of two types of newly synthesized unusual lipids on sensor response. When lipids having one triple bond each at different positions on their alkyl chains were coated onto quartz crystals separately, lower responses were observed compared to responses obtained for a sensor with immobilized, saturated phosphatidylcholine. Lipids containing -branched acyl chains, however, showed good affinity for organic vapors, and sensor responses improved 4–5-fold. Moreover, these sensors were shown to have sensitivity of the same order as the humans' sense of smell (10⁻⁵–10⁻⁶ w/w in liquid paraffin) when measured using standard odorants (isovaleric acid, skatole, etc.) for an olfactometry established in Japan.     

Seven-membered vibsane-type diterpenes with a 5,10-cis relationship from Viburnum awabuki

New five seven-membered vibsane-type diterpenes named 5-epi-vibsanin C, 5-epi-vibsanin H, 5-epi-vibsanin K, 18-O-methyl-5-epi-vibsanin K and 5-epi-vibsanin E have been isolated from the leaves of Viburnum awabuki (Caplifoliaceae). Their structures have been elucidated by analyses of spectroscopic data and comparison of their spectral data with those of the previously known seven-membered vibsane-type diterpenes. The occurrence of these seven-membered vibsane-type diterpenes with a cis relationship on the C-5 and C-10 positions in nature have been predicted by conformational analysis of vibsanin B, an eleven-membered vibsane-type diterpene. Vibsanin C, 5-epi-vibsanin C and 5-epi-vibsanin H exhibited moderate cytotoxic activities on KB cells.     

Application of plasma-polymerized films for isoelectric focusing of proteins in a capillary electrophoresis chip

The first use of plasma polymerization technique to modify the surface of a glass chip for capillary isoelectric focusing (cIEF) of different proteins is reported. The electrophoresis separation channel was machined in Tempax glass chips with length 70 mm, 300 microm width and 100 microm depth. Acetonitrile and hexamethyldisiloxane monomers were used for plasma polymerization. In each case 100 nm plasma polymer films were coated onto the chip surface to reduce protein wall adsorption and minimize the electroosmotic flow. Applied voltages of 1000 V, 2000 V and 3000 V were used to separate mixtures of cytochrome c (pI 9.6), hemoglobin (pI 7.0) and phycocyanin (pI 4.65). Reproducible isoelectric focusing of each pI marker protein was observed in different coated capillaries at increasing concentration 2.22-5 microg microL(-1). Modification of the glass capillary with hydrophobic HMDS plasma polymerized films enabled rapid cIEF within 3 min. The separation efficiency of cytochrome c and phycocyanin in both acrylamide and HMDS coated capillaries corresponded to a plate number of 19600 which compares favourably with capillary electrophoresis of neurotransmitters with amperometric detection.     

Novel asymmetric through-hole array microfabricated on a silicon plate for formulating monodisperse emulsions

We have proposed a novel microchannel (MC) structure for formulating monodisperse emulsions. The emulsification device is a silicon array of microfabricated, asymmetric through-holes with a slit and a circular channel (an asymmetric straight-through MC). The asymmetric through-holes of a uniform size stably yielded monodisperse emulsions with average droplet diameters of 35-41 mum and coefficients of variation of less than 2% by forcing the to-be-dispersed phase into the continuous phase via the through-holes. Their asymmetry enabled the stable formation of monodisperse emulsion droplets by spontaneous transformation, even using a to-be-dispersed phase with a very low viscosity below 1 mPa s. Additionally, the asymmetric straight-through MC with a high-density through-hole layout has the potential for high-throughput formulation of monodisperse emulsions.     

Reaction of α-haloester having internal double bond with the low-valent metal complex

The α-haloester having an internal double bond was allowed to react with a catalytic amount of Pd(PPh₃)₄ to afford a cyclized product in a fairly good yield and the same product was obtained by treatment with Pd(OAc)₂ to ketene silyl acetal.