BDH-TTP as a Structural Isomer of BEDT-TTF,and Its Two-Dimensional Hexafluorophosphate Salt

Metallic behavior down to low temperature is shown by charge transfer salts of BDH-TTP ( 1 ), a structural isomer of bis(ethylenedithio)tetrathiafulvalene (BEDT-TTF). In the case of (BDH-TTP)₂PF₆ this behavior is attributed to the structure, which is made up of κ-type sheets of BDH-TTP donor molecules and sheets of PF₆⁻ anions.     

Spin Excitations in the Field-Induced Phase of the Quasi-One-Dimensional S = 1 Heisenberg Antiferromagnet NDMAP

The S = 1 quasi-one-dimensional Heisenberg antiferromagnet [Ni(C₅H₁₄N₂)₂N₃](PF₆), abbreviated as NDMAP, has been studied by electron spin resonance in a magnetic field above the critical field (H _c). We studied angular and frequency dependences of spin excitations. The angular dependence of the spin excitations in the vicinity of H _c is explained well by a phenomenological field theory, but the agreement between the experiment and the calculation is not satisfactory above 10 T. In high magnetic fields above 15 T, we obtained some characteristic spin excitations which are well explained by conventional antiferromagnetic resonance modes. These results suggest that the spin excitations change from a quantum state to a classical one due to the suppression of quantum fluctuations by high magnetic fields.     

Production mechanism of proepitheaflagallin, a precursor of benzotropolone-type black tea pigment, derived from epigallocatechin via a bicyclo[3.2.1]octane-type intermediate

An unstable intermediate proepitheaflagallin B (2), a precursor of proepitheaflagallin (3), was isolated as an enzymatic oxidation product of (−)-epigallocatechin (1), and the structure of 2 was determined based on spectroscopic data. The structure and its decomposition revealed that the detailed production mechanism of proepitheaflagallin (3) via a bicyclo[3.2.1]octane-type intermediate was related to that of major black tea pigments, theaflavins.     

Specific crystal structure of poly(3-hydroxybutyrate) thin films studied by infrared reflection–absorption spectroscopy

Infrared reflection–absorption (IR-RAS) and transmission spectra were measured for poly(3-hydroxybutyrate) (PHB) thin films to explore its specific crystal structure in the surface region. As IR-RAS is sensitive to the vibration mode of perpendicular orientation of the surface, differences between IR-RAS and transmission spectra indicate an orientation of the lamella structure in the surface of PHB thin films. The relative intensity of the crystalline CO stretching band in the IR-RAS spectrum is significantly weaker than that in the transmission spectrum. It may be concluded that the transient dipole moment of the CO stretching mode of the crystalline state is not oriented perpendicular but nearly parallel to the substrate surface. On the other hand, the relative intensity of the band at 3009 cm⁻¹ due to the C–H stretching mode of the C–HOC hydrogen bonding is similar between the IR-RAS and transmission spectra, suggesting that the C–H bond is oriented neither perpendicular nor parallel to the substrate surface but in an intermediate direction. Since the CO group of the C–HOC hydrogen bonding is oriented nearly parallel to the surface and its C–H group is in the intermediate direction, it is very likely that the C–HOC hydrogen bonding has a somewhat bent structure. These results are in good agreement with our previous conclusion that the C–HOC hydrogen bonding of PHB exists along the a-axis (not the b-axis) between the CH₃ group of one helix and the CO group of another helix.     

Preparation of monodispersed vinylpyridine–divinylbenzene porous copolymer resins and their application to high-performance liquid chromatographic separation of aromatic amines

For the separation of aromatic amines, two types of monodispersed porous polymer resins were prepared by the copolymerization of 2-vinylpyridine and 4-vinylpyridine with divinylbenzene in the presence of template silica gel particles (particle size 5 μm), followed by dissolution of the template silica gel in an alkaline solution. The transmission electron micrographs and the scanning electron micrograph revealed that these templated polymer resins have a spherical morphology with a good monodispersity and porous structure. Using these monodispersed polymer resins, the high-performance liquid chromatographic separation of aromatic amines in the mobile phases of pHs 2.0, 2.9, 4.1, 7.2 and 11.7 were carried out. The 2-vinylpyridine–divinylbenzene copolymer resins showed slightly stronger retentions for aromatic amines than the 4-vinylpyridine–divinylbenzene copolymer resins. Under acidic conditions (around pH 2.0), aniline and the toluidines showed no retention on these copolymer resins due to the repulsion between the cationic forms of these amines and pyridinium cations in the stationary phase, whereas less basic aromatic amines or non-basic acetanilide showed slight retentions. Above pH 4.1, the separation of aromatic amines with these polymer resins showed a typical reversed-phase mode separation. Therefore, the separation patterns of aromatic amines are effectively tunable by changing the pH value of the mobile phases. A good separation of eight aromatic amines was achieved at pH 2.9 using the 2-vinylpyridine–divinylbenzene copolymer resins.     

Automated on-line in-tube solid-phase microextraction coupled with HPLC/MS/MS for the determination of butyrophenone derivatives in human plasma

This paper describes a fully automated on-line method combining in-tube solid-phase microextraction (SPME) in which sample clean-up and enrichment are conducted through an open tubular fused-silica capillary column and high-performance liquid chromatography (HPLC)/tandem mass spectrometry (MS/MS) detection for the determination of six butyrophenone derivatives (moperone, floropipamide, haloperidol, spiroperidol, bromperidol, and pimozide) in human plasma samples. The six butyrophenones were extracted by repeatedly aspirating and dispensing plasma sample solutions on a DB-17 capillary column (60 cm × 0.32 mm i.d., film thickness 0.25 μm). The analytes retained on the inner surface of the capillary column were then eluted into an acetonitrile-rich mobile phase using a gradient separation technique. Extraction efficiencies ranged from 12.7% to 31.8% for moperone, spiroperidol, and pimozide, and from 1.08% to 4.86% for floropipamide, haloperidol, and bromperidol. The regression equations for all compounds showed excellent linearity, ranging from 0.05 to 50 ng/0.1 mL of plasma, except for moperone and spiroperidol (0.01 to 50 ng/0.1 mL). The limits of detection and quantification in plasma for each drug were 0.03–0.2 and 0.1–0.5 ng/mL, respectively. The intra- and inter-day coefficients of variation for all compounds in plasma were not greater than 13.7%.     

Unexpected reactions of ferrocene acetal derived from tartaric acid with alkyllithium: competition between proton abstraction and nucleophilic attack

We wished to prepare planar chiral compounds by the lithiation of acetal 2-ferrocenyl-(4S,5S)-bis(methoxymethyl)-1,3-dioxolane (1) with butyllithium followed by the reaction with an electrophile. However, the desired products were not observed and two unexpected products, 1-ferrocenyl-1-pentanol (4) of the nucleophilic attack product and 2-ferrocenyl-4,5-dimethylene-1,3-dioxolane (5) of the proton abstraction product, were isolated. Because the nucleophilic attack on acetal carbon is rarely reported so far and both products 4 and 5 may have some potential uses in organic synthesis, these unexpected reactions are investigated in detail. The mechanisms of these reactions are discussed.     

Syntheses of new model compounds related to an antigenic epitope from Bupleurum falcatum L. and their distributions in various ganglioside-phospholipid monolayers

6-N-[2-(Tetradecyl)hexadecanamido]hexyl beta-D-glucopyranosyluronic acid-(1-->6)-beta-D-galactopyranosyl-(1-->6)-beta-D-galactopyranoside (1) and its clustering compound (2) carrying a tetravalent sugar unit, which are new model compounds related to a major antigenic epitope from antiulcer pectic polysaccharide of Bupleurum falcatum L., were synthesized and the distributions of 1 and 2 in mixed ganglioside (GM1, GD1a or GT1b)/phospholipid (DPPC) monolayers were observed using atomic force microscopy (AFM). AFM images showed that 1 was distributed in the GM1, GD1a and GT1b region of the mixed monolayers, in which 1 was miscible with GD1a. Specific distribution of 1 was observed in the mixed GM1/DPPC monolayer. Compound 2 was miscible with GM1, while 2 formed associations with GD1a and GT1b in the mixed monolayers. The distribution mode of 1 and 2 was different among the mixed ganglioside/DPPC monolayers.