Are the Interactions between Recombinant Prion Proteins and Polymeric Surfaces Related to the Hydrophilic/Hydrophobic Balance?

New non‐fouling tubes are developed and their influence on the adhesion of neuroproteins is studied. Recombinant prion proteins are considered as a single component representative of hydrophobic proteins. Samples are stored for 24 h at 4 °C in tubes coated with two different coatings: poly(N‐isopropylacrylamide) as a hydrophilic surface and a plasma‐fluorinated coating as a hydrophobic one. The protein adhesion is monitored by ELISA tests, XPS and confocal microscopy. It appears that the highest recovery of recombinant prion protein in the liquid phase is obtained with the hydrophilic surface while the hydrophobic character of the storage tube induces an important amount of biological loss. However, the recovery is not complete even for tubes coated with poly(N‐isopropylacrylamide).

     

Development of O–H insertion for the attachment of phosphonates to nucleosides; synthesis of α-carboxy phosphononucleosides

Development of rhodium catalysed O–H insertion reactions employing α-diazophosphonates with appropriately protected adenosine, uridine and thymidine derivatives is described. This synthetic methodology leads, following deprotection, to novel phosphononucleoside derivatives bearing a carboxylic acid moiety adjacent to the phosphonate. Protection strategies are critical to the success of the key O–H insertion. There are two important aspects: avoiding competing insertion pathways or catalyst poisoning, and being able to achieve deprotection without degradation of the phosphononucleosides.     

Propagation of melting cooperativity along the phosphodiester backbone of DNA

The role of the DNA phosphodiester backbone in the transfer of melting cooperativity between two helical domains was experimentally addressed with a helix-bulge-helix DNA model, in which the bulge consisted of a varying number of either conformationally flexible propanediol or conformationally constrained bicyclic anucleosidic phosphodiester backbone units. We found that structural communication between two double helical domains is transferred along the DNA backbone over the equivalent of ca. 12-20 backbone units, depending on whether there is a symmetric or asymmetric distribution of the anucleosidic units on both strands. We observed that extension of anucleosidic units on one strand only suffices to disrupt cooperativity transfer in a similar way as if extension occurs on both strands, indicating that the length of the longest anucleosidic inset determines cooperativity transfer. Furthermore, conformational rigidity of the sugar unit increases the distance of coopertivity transfer along the phosphodiester backbone. This is especially the case when the units are asymmetrically distributed in both strands.     

Design and synthesis of push-pull chromophores for second-order nonlinear optics derived from rigidified thiophene-based pi-conjugating spacers.

Two series of push-pull chromophores built around thiophene-based pi-conjugating spacers rigidified either by covalent bonds or by noncovalent intramolecular interactions have been synthesized and characterized by UV-vis spectroscopy, electric field induced second harmonic generation (EFISH) and differential scanning calorimetry. Comparison of the linear and second-order nonlinear optical properties of chromophores based on a covalently bridged dithienylethylene (DTE) spacer with those of their analogues based on open chain DTE shows that the rigidification of the spacer produces a considerable bathochromic shift of the absorption maximum together with a dramatic enhancement of the molecular quadratic hyperpolarizability (mu beta) which reaches values among the highest reported so far. A second series of NLO-phores has been derived from a 2,2'-bi(3,4-ethylenedioxythiophene) (BEDOT) pi-conjugating spacer. As indicated by X-ray and UV-vis data, rigidification of the spacer originates in that case, from noncovalent intramolecular interactions between sulfur and oxygen atoms. Again, comparison with the parent compounds based on an unsubstituted bithiophene spacer reveals a marked red shift of the absorption maximum and a large enhancement of mu beta. In an attempt to distinguish the contribution of the electronic and geometrical effects of the ethylenedioxy group, a third series of NLO-phores based on 3,4-ethylenedioxythiophene (EDOT) and 3,4-dihexyloxythiophene spacers has been synthesized. Comparison with compounds based on unsubstituted thiophene shows that, despite a red shift of lambda(max), introduction of alkoxy groups leads to a decrease of mu beta. Theoretical calculations indicate that this effect results from a decrease of the dipole moment (mu) caused by the auxiliary electron-donor alkoxy groups on the thiophene ring. In contrast, replacement of BT by BEDOT produces an increase of mu, which associated with the noncovalent rigidification of the BT system accounts for the observed enhancement of mu beta.     

Easily synthesized antimalarial ferrocene triazacyclononane quinoline conjugates

Starting from triazacyclononane, easily accessible ferrocenic quinoline derivatives were synthesized. Their antiplasmodial properties were investigated against chloroquine sensitive (HB3) and chloroquine-resistant (Dd2) Plasmodium falciparum. One of them, 7-chloro-4-[4-(7-chloro-4-quinolyl)-7-ferrocenylmethyl-1,4,7- triazacyclononan-1-yl]quinoline (4) showed potent antimalarial activity in vitro against the chloroquine-resistant strain Dd2 and therefore revealed to be the most promising lead from the present work for new organometallic antimalarial agents.     

Importance of REP values when comparing the CALUX bioassay results with chemoanalyses results Example with spiked vegetable oils

Differences between chemical activated luciferase gene expression (CALUX) bioassay and chemoanalyses results are observed.This paper shows that calculations of the TEQ values using REP values instead of WHO TEF values give different results. The REP values do affect the results obtained by the CALUX technique. These differences are more marked for the dioxin like PCB compounds (CALUX TEQ values are lower than WHO TEQ values) than for the dioxin compounds (CALUX TEQ values are higher than WHO TEQ values).The CALUX results were compared with the concentrations of the congeners’ spiked into the oil.     

Thyonosides A and B, two new saponins isolated from the holothurian Thyone aurea

The structures of two saponins, thyonosides A and B, isolated from the holothurian Thyone aurea collected in Namibia, were elucidated by 1D and 2D NMR (¹H, ¹³C, ¹H-¹H COSY, ¹H-¹H J-resolved, TOCSY, HMQC, HMBC and NOESY). The two compounds have the same aglycon but different oligosaccharidic chains. Thyonoside A has a 3-O-methyl-β-d-xylopyranosyl-(1→3)-6-O-sodium sulphate-β-d-glucopyranosyl-(1→4)-β-d-quinovopyranosyl-(1→2)-4-O-sodium sulphate-β-d-xylopyranosyl chain, and thyonoside B a 3-O-methyl-β-d-xylopyranosyl-(1→4)-β-d-xylopyranosyl-(1→4)-β-d-quinovopyranosyl-(1→2)-4-O-sodium sulphate-β-d-xylopyranosyl chain. The holostane-type aglycon features an endocyclic double bond at position 7-8, a double bond at position 25-26 and a β-acetoxy group at C16.     

Properties of polysaccharides grafted on nanoparticles investigated by EPR

The in vivo fate of nanoparticles developed as drug delivery systems is influenced by the surface characteristics of the colloidal particles. In the present work, surface characteristics of a series of poly(isobutylcyanoacrylate) nanoparticles prepared by redox radical emulsion polymerization with polysaccharides of different molecular weight and nature were characterized by EPR. To this aim, a spin label was grafted on the polysaccharide chains after synthesis of the nanoparticles. The percentage of label showing fast movements was evaluated from EPR spectra which were analyzed according to the Kivelson theory. The results showed that mobility depended on temperature, type, and molecular weight of the polysaccharides. Differences between nanoparticles appeared with low-molecular-weight polysaccharides, while over a defined molecular weight which depended on the nature of the polysaccharide, the spin label behaved almost the same way in the different types of nanoparticles. Paradoxically, the percentage of fast moving label was the highest when linked to the shortest chitosan, which was the most rigid polysaccharide tested in this study. Thus, it was concluded that the apparent mobility of the polysaccharide evaluated by the EPR method depended on the capacity of the polysaccharide chains to fold making possible hydrophobic interactions between the label and the nanoparticle core. The transition between the unfolded-folded regiment depended on the molecular weight and on the nature of the polysaccharide. Results of this study may be useful to improve the understanding of the nanoparticle interactions with blood proteins and complement which in turn influence the in vivo fate of nanoparticles used as drug delivery systems.     

Considerations on the possibilities and limitations of comprehensive normal phase-reversed phase liquid chromatography (NPLC x RPLC)

A comprehensive normal phase system LC-reversed phase LC (NPLC x RPLC) was evaluated for the separation of a pharmaceutical mixture and citrus oil extracts. NPLC was performed on a 25 cm x 1 mm ID x 5 microm dp diol phase. In the second dimension, an RP 18 monolithic column (10 cm L x 4.6 mm ID x 2 microm macropore size) and an octadecyl silicagel-packed column (5 cm L x 4.6 mm ID x 3.5 microm dp) were applied for the analyses of the pharmaceutical sample and the citrus oil extracts, respectively. A two-position/ten-port switching valve was used as interface. Under optimised LC conditions, the high degree of orthogonality between NP and RP resulted in peak capacities of 300 for the pharmaceutical sample and of 450 for the citrus oil extract composed of lemon and orange oil. Despite the features of NPLC x RPLC, several shortcomings related with the solvent incompatibility between the two LC modes were identified and the practical consequences were discussed.