Adsorption of barium and calcium chloride onto negatively charged alpha-Fe(2)O(3) particles

Adsorption of cations (Na(+), Ca(2+), Ba(2+)) onto negatively charged (pH 10.4) hematite (alpha-Fe(2)O(3)) particles has been studied. The oxide material was carefully prepared in order to obtain monodisperse suspensions of well-crystallized, quasi-spherical particles (50 nm in diameter). The isoelectric point (IEP) is located at pH 8.5. Adsorption of barium ions onto oxide particles was carried out and the electrophoretic mobility was measured throughout the adsorption experiment. Comparison with calcium adsorption at full coverage reveals a higher uptake of Ba(2+). In both cases it shows also that chloride ions coadsorb with M(2) ions. Simultaneous uptake of the positive and negative ions explains why the electrophoretic mobility does not reverse to cationic migration. A theoretical study of the surface speciation has been carried out, using the MuSiC model. It reveals the presence of negative as well as positive sites on both sides of the point of zero charge (PZC) of the hematite particles, which may explain the coadsorption of Ba(2+) and Cl(-) at pH 10.4. The effective charge of the oxide particles, calculated from the electrophoretic mobility, is in very good agreement with the results found with the MuSiC modelization and the chloride/barium adsorption ratio. It also verifies the theory of ionic condensation. Calorimetric measurements gave a negative heat for the overall reaction occurring when Ba(2+)/Cl(-) ions adsorb onto hematite. Despite the fact that anions (Cl(-) and OH(-)) adsorption onto mineral oxides is an exothermic phenomenon, it is likely that barium and calcium adsorption is endothermic, denoting the formation of an inner-sphere complex as reported in the literature.     

Catalytic,Asymmetric Synthesis of Phosphonic γ‐(Hydroxyalkyl)butenolides with Contiguous Quaternary and Tertiary Stereogenic Centers

A procedure that enables high yielding access to phosphonic γ‐(hydroxyalkyl)butenolides with excellent regio‐, diastereo‐ and enantiocontrol is reported. The simultaneous construction of up to two adjacent quaternary stereogenic centers by a catalytic asymmetric vinylogous Mukaiyama aldol reaction unites biologically and medicinally relevant entities, namely α‐hydroxy phosphonates and γ‐(hydroxyalkyl)butenolides. This is achieved by utilizing a readily available chiral copper‐sulfoximine catalyst showing a broad functional group tolerance for both the electrophilic and nucleophilic reactants. A discussion about potential factors affecting the observed level of enantioselectivity, which stems from the enantiopure sulfoximine ligand, is also included.     

New access to H-phosphonates via metal-catalyzed phosphorus-oxygen bond formation

A novel approach to H-phosphonates from hypophosphorous acid using a transfer hydrogenation process was developed. This method is atom-economical, environmentally friendly, catalytic, and efficient, leading easily to H-phosphonate monoesters or ammonium salt in moderate to good yields.     

Synthesis of 2′-Deoxy-5-(isothiazol-5-yl)uridine and Its Interaction with the HSV-1 Thymidine Kinase

2′-Deoxy-5-(isothiazol-5-yl)uridine ( 12 ) was synthesized starting from 2′-deoxy-5-iodouridine using a Pd-catalysed cross-coupling reaction with propiolaldehyde diethyl acetal followed by deprotection and ring closure using thiosulfate. 2′-Deoxyuridine 12 has a particular place among the 5-heteroaryl-substituted 2′-deoxyuridines in that it has a high affinity for herpes simplex virus type 1 (HSV-1)-encoded thymidine kinase (TK) without antiviral activity. Biochemical studies revealed that 12 is a substrate for viral TK. We further investigated the interaction of 12 with the HSV-1 thymidine kinase. The conformation of 12 in solution was established by NMR spectroscopy. The most stable conformer 12A has the S-atom of the isothiazole ring placed in the neighbourhood of the C(4)?O group of the pyrimidine moiety. The compound was docked in its most stable conformation in the active site of HSV-1 TK and subjected to energy minimization. This demonstrated that the isothiazole moiety binds in a cavity lined by the side chains of Tyr-132, Arg-163, Ala-167, and Ala-168 and that the C(3) atom of the isothiazole moiety is located in close proximity of the phenolic O-atom of Tyr-132 and the aliphatic part of the Arg-163 side chain.     

Comparison of direct mass spectrometry methods for the on‐line analysis of volatile compounds in foods

For the on‐line monitoring of flavour compound release, atmospheric pressure chemical ionization (APCI) and proton transfer reaction (PTR) combined to mass spectrometry (MS) are the most often used ionization technologies. APCI‐MS was questioned for the quantification of volatiles in complex mixtures, but direct comparisons of APCI and PTR techniques applied on the same samples remain scarce. The aim of this work was to compare the potentialities of both techniques for the study of in vitro and in vivo flavour release. Aroma release from flavoured aqueous solutions (in vitro measurements in Teflon bags and glass vials) or flavoured candies (in vivo measurements on six panellists) was studied using APCI‐ and PTR‐MS. Very similar results were obtained with both techniques. Their sensitivities, expressed as limit of detection of 2,5‐dimethylpyrazine, were found equivalent at 12 ng/l air. Analyses of Teflon bag headspace revealed a poor repeatability and important ionization competitions with both APCI‐ and PTR‐MS, particularly between an ester and a secondary alcohol. These phenomena were attributed to dependency on moisture content, gas/liquid volume ratio, proton affinities and product ion distribution, together with inherent drawbacks of Teflon bags (adsorption, condensation of water and polar molecules). Concerning the analyses of vial headspace and in vivo analyses, similar results were obtained with both techniques, revealing no competition phenomena. This study highlighted the equivalent performances of APCI‐MS and PTR‐MS for in vitro and in vivo flavour release investigations and provided useful data on the problematic use of sample bags for headspace analyses. Copyright © 2013 John Wiley & Sons, Ltd.     

Probing the glycosidic linkage: UV and IR ion-dip spectroscopy of a lactoside

The beta(1-->4) glycosidic linkage found in lactose is a prevalent structural motif in many carbohydrates and glycoconjugates. Using UV and IR ion-dip spectroscopies to probe benzyl lactoside isolated in the gas phase, we find that the disaccharide unit adopts only a single, rigid structure. Its fully resolved infrared ion-dip spectrum is in excellent agreement with that of the global minimum structure computed ab initio. This has glycosidic torsion angles of phi(H) (H1-C1-O-C4') approximately 180 degrees and psi(H) (C1-O-C4'-H4') approximately 0 degrees which correspond to a rotation of approximately 150 degrees about the glycosidic bond compared to the accepted solution-phase conformation. We discuss the biological implications of this discovery and the generality of the strategies employed in making it.     

Nuclear inelastic scattering studies on a dinuclear iron(II) spin crossover complex

The vibrational properties of the (high-spin)-(high-spin) and the (high-spin)- (low-spin) states of the dinuclear Fe(II) spin crossover complex[{Fe(L-N₄Me₂)}₂(BiBzIm)](ClO₄)₂·2EtCN¹ have been studied by means of nuclear inelastic scattering. At a temperature of 80 K typical low spin marker bands are detected in the region around 400 cm^?1, these bands almost completely disappear after increasing temperature to 190 K. Corresponding density functional theory calculations using the functional B3LYP* and the basis set CEP-31G reproduce the experimental data and thus allow a deeper understanding of the vibrational properties of dinuclear Fe(II) spin crossover complexes.     

Aromatic CC Bonds as Dipolarophiles: Facile Reactions of Uncomplexed Electron‐Deficient Benzene Derivatives and Other Aromatic Rings with a Non‐Stabilized Azomethine Ylide

Non‐stabilized azomethine ylide 4 a reacts smoothly at room temperature with a variety of uncomplexed aromatic heterocycles and carbocycles on the condition that the ring contains at least one or two electron‐withdrawing substituents, respectively. Aromatic substrates, including pyridine and benzene derivatives, participate as 2 π components in [3+2] cycloaddition reactions and interact with one, two, or three equivalent(s) of the ylide, depending on their structure and substitution pattern. Thus, this process affords highly functionalized polycyclic structures that contain between one and three pyrrolidinyl ring(s) in useful yields. These results indicate that the site selectivity of the cycloaddition reactions strongly depends on both the nature and the positions of the substituents. In most cases, the second 1,3‐dipolar reaction occurs on the opposite face to the one that contains the first pyrrolidinyl ring. DFT calculations on model compounds indicate that a concerted mechanism features a low activation barrier.     

Efficient recycling of a chiral palladium catalytic system for asymmetric allylic substitutions in ionic liquid

Chiral carbohydrate-based diphosphites were used for Pd-catalysed asymmetric allylic substitution (alkylation, amination, phosphination) in neat ionic liquids (ILs). Pyrrolidinium-based IL led to the best activities, allowing an efficient catalyst immobilization. In the allylic amination (TOF > 3100 h(-1)), the catalyst could be recycled nine times preserving both activity and enantioselectivity.     

Solid-supported solution-phase synthesis of 4-amino-1,2,4,5-tetrahydro-2-benzazepine-3-ones

Starting from Boc-o-aminomethylphenylalanine, a solution-phase parallel synthesis of 2,4-substituted 4-amino-1,2,4,5-tetrahydro-2-benzazepine-3-ones is described. This heterocycle has two nitrogen functions, which are differentiated and can be selectively substituted. The sources of diversity are aldehydes for the R(1) position and carboxylic acids, sulfonyl chlorides, or isocyanates for the R(2) position. High-throughput synthesis and purification of this multistep synthetic sequence was accomplished using polymer-bound reagents and scavengers and liquid-liquid extraction protocols, and a small library of compounds was prepared. Polymer-bound cyanoborohydride was found to work well for the reductive amination. Scavenging of excess of amine was performed by polymer-bound benzaldehyde, and cyclization was performed in the presence of polymer-bound coupling reagent 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC). After Boc-deprotection, the second nitrogen can be acylated using carboxylic acids, sulfonylated or converted to a urea. The acylation is again performed by polymer-bound EDC. Excellent yields and purities were obtained.