Stereoselective Cycloaddition of Monosubstituted Ketene to a Methyl Glyoxylate- and Threonine-Derived Imine: Synthesis of Optically Pure β-Lactamic α-Amino Ester with High Functionality

The reaction of chloroacetyl chloride and triethylamine with a chiral imine derived from the combination of methyl glyoxylate and protected L-threonine gave two optically active α-amino acid derivatives with a cis-substituted β-lactam skeleton in a 72:28 ratio. The major product is obtained in 59% yield by simple crystallisation.     

Adsorption of barium and calcium chloride onto negatively charged alpha-Fe(2)O(3) particles

Adsorption of cations (Na(+), Ca(2+), Ba(2+)) onto negatively charged (pH 10.4) hematite (alpha-Fe(2)O(3)) particles has been studied. The oxide material was carefully prepared in order to obtain monodisperse suspensions of well-crystallized, quasi-spherical particles (50 nm in diameter). The isoelectric point (IEP) is located at pH 8.5. Adsorption of barium ions onto oxide particles was carried out and the electrophoretic mobility was measured throughout the adsorption experiment. Comparison with calcium adsorption at full coverage reveals a higher uptake of Ba(2+). In both cases it shows also that chloride ions coadsorb with M(2) ions. Simultaneous uptake of the positive and negative ions explains why the electrophoretic mobility does not reverse to cationic migration. A theoretical study of the surface speciation has been carried out, using the MuSiC model. It reveals the presence of negative as well as positive sites on both sides of the point of zero charge (PZC) of the hematite particles, which may explain the coadsorption of Ba(2+) and Cl(-) at pH 10.4. The effective charge of the oxide particles, calculated from the electrophoretic mobility, is in very good agreement with the results found with the MuSiC modelization and the chloride/barium adsorption ratio. It also verifies the theory of ionic condensation. Calorimetric measurements gave a negative heat for the overall reaction occurring when Ba(2+)/Cl(-) ions adsorb onto hematite. Despite the fact that anions (Cl(-) and OH(-)) adsorption onto mineral oxides is an exothermic phenomenon, it is likely that barium and calcium adsorption is endothermic, denoting the formation of an inner-sphere complex as reported in the literature.     

Two new tetrahydrofuran derivatives from the fungus Mucor spp. SNB-VECD11D isolated from the Chrysomelidae Acalymma bivittula

Two new tetrahydrofuran derivatives, mucorinic acids A (1) and B (2) as well as the three known secondary metabolites dehydroabietic acid (3), Δ8-dihydroabietic acid (4) and 8-pimarenic acid (5) were isolated from a solid culture of the fungus Mucor spp. isolated on insect Acalymma bivittula. The structure of these compounds was elucidated by analysis of NMR and MS spectroscopic data. Compounds were tested in antimicrobial and insecticidal assays. Dehydroabietic acid exhibited moderate larvicidal activity on Aedes aegypti larvae with 65% mortality at 10 ppm. Both new compounds 1 and 2 showed interesting antibacterial activity on Staphylococcus aureus and methicillin resistant S. aureus with MIC values in the 8–16 μg/ml.     

Ligand and base additive effects on the reversibility of nucleophilic addition in palladium-catalyzed allylic aminations monitored by nucleophile crossover

A nucleophile crossover experiment was used to monitor the reversibility of nucleophilic addition of benzylamine to π-allylpalladium complexes. Dppe, dppp, dppb, and PHOX showed more crossover than PPh₃ and dppm in both DMF and dichloromethane. Crossover was inhibited by the addition of DBU or Cs₂CO₃, but much less elimination to diene side products was observed with Cs₂CO₃. Analysis of percent crossover vs. percent reaction completion using the PHOX ligand revealed that with added DBU or Cs₂CO₃ crossover only began occurring after 100% completion had been reached.     

Trans or (Unusual) Cis Geometry in d(2) Octahedral Dioxo Complexes. A DFT Study

Geometry optimization of the cis and the trans isomers of several octahedral dioxo complexes of d(2) electronic configuration are performed using the gradient-corrected density functional theory (B3LYP and, for some key structures, BP86). With only monodentate sigma donor ligands (ReO(2)(NH(3))(4)(+), 7), the usual energy order is found (i.e., the trans isomer is the most stable). Complexes with a chelating bidentate ligand, OsO(2)(OCH(2)CH(2)O)(NH(3))(2) (10) and ReO(2)(HN=CHCH=NH)(NH(3))(2)(+) (11), are used as models for the experimental complexes 5 and 2 in which the arrangement of the O=M=O unit is trans and cis, respectively. Our calculations actually show an inversion of the relative energy of the two isomers in going from 10 to 11: while the trans isomer is found to be the most stable in 10, the unusual cis diamagnetic isomer is favored by about 29 kcal mol(-)(1) in 11. This result is traced to the geometric and electronic properties of the bidentate ligand, in particular an acute bite angle and good pi acceptor character. In complex 14 with a bipyridine chelating ligand (weaker pi acceptor than diaza-1,4-butadiene in 11), this energy difference is, however, reduced to 7.5 kcal mol(-)(1) (partial geometry optimization).     

Influence of the aggregation state in solution on the supramolecular organization of adsorbed type I collagen layers

In the last years, adsorbed collagen was shown to form layers with a supramolecular organization depending on the substrate surface properties and on the preparation procedure. If the concentration of collagen and the duration of adsorption are sufficient, fibrillar collagen structures are formed, corresponding to assemblies of a few molecules. This occurs more readily on hydrophobic compared to hydrophilic surfaces. This study aims at understanding the origin of such fibrillar structures and in particular at determining whether they result from the deposition of fibrils formed in solution or from the building of assemblies at the interface. Therefore, type I collagen solutions with an increasing degree of aggregation were prepared, using the “neutral-start” approach, by ageing pH 5.8 solutions at 37 °C for 15 min, 2 or 7 days. The obtained solutions were used to investigate the influence of collagen aggregation in solution on the supramolecular organization of adsorbed collagen layers, which was characterized by X-ray photoelectron spectroscopy and atomic force microscopy. Polystyrene and plasma-oxidized polystyrene were chosen as substrates for the adsorption. The size and the density of collagen fibrils at the interface decreased upon increasing the degree of aggregation of collagen in solution. This is explained by a competitive adsorption process between monomers and aggregates of the solution, turning at the advantage of the monomers. More aggregated solutions, which are thus depleted in free monomers, behave like less concentrated solutions, i.e. lead to a lower adsorbed amount and less fibril formation at the interface. This study shows that the supramolecular fibrils observed in adsorbed collagen layers, especially on hydrophobic substrates, are not formed in the solution, prior to adsorption, but are built at the interface, through the assembly of free segments of adsorbed molecules.     

Synthesis of 2′-Deoxy-5-(isothiazol-5-yl)uridine and Its Interaction with the HSV-1 Thymidine Kinase

2′-Deoxy-5-(isothiazol-5-yl)uridine ( 12 ) was synthesized starting from 2′-deoxy-5-iodouridine using a Pd-catalysed cross-coupling reaction with propiolaldehyde diethyl acetal followed by deprotection and ring closure using thiosulfate. 2′-Deoxyuridine 12 has a particular place among the 5-heteroaryl-substituted 2′-deoxyuridines in that it has a high affinity for herpes simplex virus type 1 (HSV-1)-encoded thymidine kinase (TK) without antiviral activity. Biochemical studies revealed that 12 is a substrate for viral TK. We further investigated the interaction of 12 with the HSV-1 thymidine kinase. The conformation of 12 in solution was established by NMR spectroscopy. The most stable conformer 12A has the S-atom of the isothiazole ring placed in the neighbourhood of the C(4)?O group of the pyrimidine moiety. The compound was docked in its most stable conformation in the active site of HSV-1 TK and subjected to energy minimization. This demonstrated that the isothiazole moiety binds in a cavity lined by the side chains of Tyr-132, Arg-163, Ala-167, and Ala-168 and that the C(3) atom of the isothiazole moiety is located in close proximity of the phenolic O-atom of Tyr-132 and the aliphatic part of the Arg-163 side chain.     

Modeling the frequency dependence (5-120 MHz) of ultrasound backscattering by red cell aggregates in shear flow at a normal hematocrit

The frequency dependence of the ultrasound signal backscattered by blood in shear flow was studied using a simulation model. The ultrasound backscattered signal was computed with a linear model that considers the characteristics of the ultrasound system and tissue acoustic properties. The tissue scattering properties were related to the position and shape of the red blood cells (RBCs). A 2D microrheological model simulated the RBC dynamics in a Couette shear flow system. This iterative model, described earlier [Biophys. J. 82, 1696-1710 (2002)], integrates the hydrodynamic effect of the flow, as well as adhesive and repulsive forces between RBCs. RBC aggregation was simulated at 40% hematocrit and shear rates of 0.05-2 s(-1). The RBC aggregate sizes ranged, on average, from 3.3 RBCs at 2 s(-1) to 33.5 cells at 0.05 s(-1). The ultrasound backscattered power was studied at frequencies between 5-120 MHz and insonification angles between 0-180 degrees. At frequencies below approximately 30 MHz, the ultrasound backscattered power increased as the shear rate was decreased and the size of the aggregates was raised. A totally different scattering behavior was noted above 30 MHz. Typical spectral slopes of the backscattered power (log-log scale) between 5-25 MHz equaled 3.8, whereas slopes down to 0.6 were measured at 0.05 s(-1), between 40-60 MHz. The ultrasound backscattered power was shown to be angle dependent at low frequencies (5-25 MHz). The anisotropy persisted at high frequencies (>25 MHz) for small aggregates (at 2 s(-1)). In conclusion, this study sheds some light on the blood backscattering behavior with an emphasis on the non-Rayleigh regime. Additional experimental studies may be necessary to validate the simulation results, and to fully understand the relation between the ultrasound backscattered power, level of RBC aggregation, shear rate, frequency, and insonification angle.     

Structural characterization of crystalline ternary inclusion compounds at the air-water interface

Crystalline ternary inclusion monolayers consisting of a two-dimensional hydrogen-bonded host network of guanidinium (G) ions and organosulfonate (S) amphiphiles, and biphenylalkane guests, can be generated at the air-water interface through synergistic structural enforcement by hydrogen bonding and host-guest packing. Surface pressure-area isotherms of the 4'-hexadecylbiphenyl-4-sulfonate (C16BPS) amphiphile in the presence of G, with or without guest, are characterized by lift-off molecular areas expected for the GS sheet based on single-crystal X-ray structures of homologous bulk crystals. Intercalation of biphenylalkane guests (4-C(n)()H(2)(n)()(+1)-C(6)H(4)-C(6)H(5), n = 1, 4, 6, 10, 16; denoted CnBP) between organosulfonate hydrophobes, which define pocketlike cavities in the GS monolayer host, afford ternary inclusion monolayers with a 1:1 host-guest stoichiometry. These inclusion monolayers are less compressible than the guest-free host, consistent with dense packing of the biphenylalkane moieties of the host and the biphenylalkane guests. The inclusion monolayers are distinguished from the amorphous guest-free host and from selected guanidinium-free mixed monolayers by structural characterization with grazing-angle incidence X-ray diffraction (GIXD). The GIXD data for the ternary (G)C16BPS:C16BP and (G)C16BPS:C6BP inclusion monolayers obtained upon compression are consistent with a rectangular unit cell. The dimensions of these unit cells and refinement of the GIXD data suggest a "rotated shifted ribbon" GS hydrogen-bonding motif similar to that observed in some bulk GS crystals, including (G)(ethylbiphenylsulfonate). GIXD reveals that (G)C16BPS:C16BP and (G)C16BPS:C6BP are more crystalline than the corresponding guanidinium-free mixed monolayers. The (G)C16BPS:C6BP inclusion monolayer is stable upon compression, even though the alkyl-alkyl host-guest interactions are reduced due to the shorter hexyl substituents of the guest, demonstrating an important reinforcing role for the hydrogen-bonded GS sheet. The structure of a C16BPS:tetracosane (C24) mixed monolayer is independent of G; the unit cell symmetry and dimensions suggest a structure governed by alkyl-alkane interactions that prohibit formation of a GS network. These results illustrate that the existence of ternary inclusion monolayers with an intact GS network requires guest molecules that are structurally homologous with the hydrophobes of the host, in this case biphenylalkanes. The observation of these inclusion compounds suggests an approach for introducing functional nonamphiphilic molecules to an air-water interface through inclusion in a well-defined host.