Determination of per- and polyfluorinated substances in airborne particulate matter by microwave-assisted extraction and liquid chromatography-tandem mass spectrometry

A sensitive and confirmatory analytical method has been developed for the determination of 12 ionic per- and polyfluorinated alkyl substances (PFAS) in fine airborne particulate matter (PM2.5) at trace levels. The proposed method includes extraction of PM2.5-bound PFAS by microwave-assisted extraction (MAE) followed by centrifugation and injection into the liquid chromatograph coupled to a triple quadrupole tandem mass spectrometry system (LC-MS/MS). The main parameters affecting the performance of MAE were optimised using statistical design of experiments (DoE). Recoveries ranged from 83 to 120% and the method quantification limit (MQL) was 1.4 pg m(-3), when air volumes of 720 m(3) were sampled. This method was successfully applied to 41 samples collected from five stations of the monitoring network of the Valencian Regional Government (Spain) during April-July 2010. Eight out of 12 PFCs investigated were quantified in at least one sample (PFBA, PFPeA, PFHxS, 6:2 FTS, PFOA, PFNA, PFOS and PFDA). The measured concentrations ranged from 1.4 to 34.3 pg m(-3).     

Sol–gel silica hybrid biomaterials for application in biodegradation of toxic compounds

The purpose of the present work is the sol–gel synthesis, structure characterization and potential application of hybrid biomaterials based on silica precursor (MTES) and natural polymers such as gelatin or pectin. The structure formation in the biomaterials was investigated by XRD, FTIR, BET and AFM. The results showed that all studied hybrid biomaterials have an amorphous structure. The FT-IR spectra of the obtained materials with MTES showed chemical bonds at 2,975, 1,255, 880 and 690 cm⁻¹ due to the presence of Si–O–R (CH₃ and C₂H₅) and Si–C bonds. In the samples synthesized with TEOS the inorganic and organic components interact by hydrogen bonding, Van der Waals or electrostatic forces. Surface area of investigated samples decreases with increasing of the natural polymers content. The structure evolution was studied by AFM and roughness analysis. Depending on the chemical composition a different design and size of particles and their aggregates on the surface structure were established. The hybrid biomaterials were used for immobilization of bacterial cells and applied in the biodegradation of the toxic compound 4-chlorobutyronitrile, possible constituent of waste water effluents in a laboratory glass bioreactor. Optimization of the process at different temperatures was carried out.     

Alkaline side-coordination strategy for the design of nickel(II) and nickel(III) bis(1,2-diselenolene) complex based materials

The deprotonated form of the pyrazine-2,3-diselenol (pds) ligand, pds(2-), reacts with Ni(II) inorganic salts to form the nickel compounds [Ni(II)(pds)(2)](nBu(4)N)(2) (1), [Ni(II)(pds)(2)]Na(2).2H(2)O (2), and [Ni(III)(pds)(2)](2)Na(2).4H(2)O (3), depending on the reaction conditions. They are characterized by NMR, EPR, UV-vis, and IR spectroscopies, elemental analysis, cyclic voltammetry, and X-ray crystallography. The crystal structure of compound 3 shows the formation of segregated stacks of Ni(pds)(2-) units, with a strong dimerization along the stacks. The stacked fashion of the crystal packing was expected since the supramolecular forces of the alkaline side coordination to the pyrazine moieties dominate, as happens in the recently reported analogous copper system [Cu(III)(pds)(2)]Na.2H(2)O. The structure of 2 further emphasizes the alkaline coordination as the dominating supramolecular event, and an orthogonal array of 2D layers is observed. The absence of alkaline cations in complex 1 is reflected in a crystal packing with isolated complex Ni(pds)(2)(2-) units. The dimerization found in the paramagnetic Ni(III) complex 3 promotes a very strong antiferromagnetic interaction, leading to a singlet ground state.     

Immobilized polysiloxanes as stationary phases for high-performance liquid chromatography and solid phase extraction

Polysiloxanes immobilized onto the surfaces of porous silica particles have proven to be good stationary phases for the separation of multiresidues of pesticides and their metabolic/degradation products by reversed-phase high-performance liquid chromatography (RP-HPLC). Similar materials have proven effective for pre-concentration and clean-up procedures using solid phase extraction. The present paper describes the preparation and some applications of several of these packing materials.     

Comparison of Several Calibration Procedures for Glass Electrodes in Proton Concentration

Several reported procedures for calibrating glass electrodes in proton concentration are compared. Some recommendations for non-experts are also given. The examined procedures can be classified into two broad categories, namely: those based on direct potential difference measurements of solutions of known proton concentration and those that use one or several pH standards to calibrate the electrode and subsequently measure the pH of solutions containing known proton concentrations. With a single buffer, the two types of procedures lead to equivalent results. However, if two pH buffers are used, the slope of the calibration graph in proton concentration will differ from the real electrode slope to an extent proportional to the difference between the liquid junction potentials of the two buffers. Therefore, any other method is preferable under these circumstances.     

Chromatographic and column stability at pH 7 of a C18 dimethylurea polar stationary phase

Chromatographic evaluations of a C18 dimethylurea phase in 150 mm x 3.9 mm HPLC columns were performed using the Tanaka and Engelhardt test mixtures. The applicability of the new C18 dimethylurea phase was also evaluated with a mixture of some herbicides and their metabolites. An artificial aging procedure was also performed by passing a potassium phosphate mobile phase buffered at pH 7.0 through C18 50 mm x 3.9 mm dimethylurea columns. The column stability was evaluated by means of the chromatographic parameters obtained for the separation of some compounds from the Neue test mixture, using apolar, polar and highly basic analytes.     

Oxorhenium(V) Complexes with Thiosemicarbazones

Neutral oxorhenium(V) complexes with thiosemicarbazones derived from 2‐pyridine formamide, HL¹, are formed when [ReOCl₃(PPh₃)₂] reacts with equimolar amounts of the ligands. Reduction of the metal and the formation of rhenium(III) complexes of the composition [Re(L¹)₂]⁺ occurs when an excess of thiosemicarbazones is used and the reaction is performed in boiling toluene for a prolonged period of time. The thiosemicarbazones deprotonate and act as tridentate ligands as has been confirmed by an X‐ray structure of [ReOCl₂(L^1b)], where HL^1b is 2‐pyridineformamide‐N(4)‐ethylthiosemicarbazone and the ligand occupies the equatorial coordination sphere of the complex together with one of the chloro ligands.     

Structural analysis, spectroscopic, and magnetic properties of the 1D triple-bridged compounds [M(dca)2(bpa)] (M = Mn, Fe, Co, Zn; dca = dicyanamide; bpa = 1,2-bis(4-pyridyl)ethane) and the 3D [Ni(dca)(bpa)2]dca·6H2O

The family of compounds [Mn(dca)(2)(bpa)] (1), [Fe(dca)(2)(bpa)] (2), [Co(dca)(2)(bpa)] (3), [Zn(dca)(2)(bpa)] (4), and [Ni(dca)(bpa)(2)]dca·6H(2)O (5), with dca = dicyanamide and bpa = 1,2-bis(4-pyridyl)ethane, has been synthesized. These compounds have been characterized by single crystal (1, 2, 4, and 5) and powder X-ray diffraction (3), by Fourier transform infrared (FTIR), UV-vis, and electron paramagnetic resonance (EPR) spectroscopies, and by magnetic measurements. Compound 1 crystallizes in the monoclinic C2/c space group, Z = 4, with a = 16.757(6), b = 9.692(3), and c = 13.073(4) ?, and β = 123.02(2)°; Compound 2 crystallizes in the monoclinic C2/c space group, Z = 4, with a = 16.588(5), b = 9.661(3), c = 12.970(5) ?, and β = 123.16(3)°; Compound 4 crystallizes in the monoclinic C2/c space group, Z = 4, with a = 16.519(2), b = 9.643(2), c = 12.943(2) ?, and β = 123.15(1)°; Compound 5 crystallizes in the monoclinic C2/c space group, Z = 4, with a = 18.504(4), b = 19.802(3), and c = 8.6570(18) ?, and β = 99.74(2)°. The compounds 1-4 are isostructural and show a one dimensional (1D) disposition, with the metal(II) ions bridged by double μ(1,5) dca ligands and unusually by a third bridge consisting of the bpa ligand, which adopts a very low torsion angle to accommodate in the structure. This kind of structure is unusual, even considering the voluminous bpa bridge. The compound 5 shows a 3D structure with layers of Ni-bpa joined by single dca bridges. Magnetic susceptibility measurements show antiferromagnetic couplings, increasing for 1-3. Compound 5 shows very slight antiferromagnetic interactions.