Study of negative thermal expansion and shift in phase transition temperature in Ti4+- and Sn4+-substituted ZrW2O8 materials

The negative-thermal-expansion material ZrW(2)O(8) is known to undergo an order-disorder phase transition which affects its expansion behavior. In this study, Ti(4+) and Sn(4+) are examined as possible substituting ions for the Zr(4+) position in ZrW(2)O(8). This substitution leads to a decrease in cell parameters, as the ionic radii of the substituents are smaller than the Zr(4+) ionic radius. A remarkable decrease in transition temperature is noticed. DSC is used to quantify the enthalpy and entropy changes during the phase transition in order to reveal the mechanisms behind this decrease. It is shown that the strength of the M-O bond plays an important role, as it is a partner in the rigid unit mode motion and the order-disorder transition mechanism.     

Lanthanide(III) Complexes of 2‐[4,7,10‐Tris(phosphonomethyl)‐1,4,7,10‐tetraazacyclododecan‐1‐yl]acetic Acid (H7DOA3P): Multinuclear‐NMR and Kinetic Studies

The protonation constants of 2‐[4,7,10‐tris(phosphonomethyl)‐1,4,7,10‐tetraazacyclododecan‐1‐yl]acetic acid (H₇DOA3P) and of the complexes [Ln(DOA3P)]^4? (Ln=Ce, Pr, Sm, Eu, and Yb) have been determined by multinuclear NMR spectroscopy in the range pD 2–13.8, without control of ionic strength. Seven out of eleven protonation steps were detected (pK =13.66, 12.11, 7.19, 6.15, 5.77, 2.99, and 1.99), and the values found compare well with the ones recently determined by potentiometry for H₇DOA3P, and for other related ligands. The overall basicity of H₇DOA3P is higher than that of H₄DOTA and trans‐H₆DO2A2P but lower than that of H₈DOTP. Based on multinuclear‐NMR spectroscopy, the protonation sequence for H₇DOA3P was also tentatively assigned. Three protonation constants (pK_MHL, pK_MH2L, and pK_MH3L) were determined for the lanthanide complexes, and the values found are relatively high, although lower than the protonation constants of the related ligand (pK , pK , and pK ), indicating that the coordinated phosphonate groups in these complexes are protonated. The acid‐assisted dissociation of [Ln(DOA3P)]^4? (Ln=Ce, Eu), in the region c_H+=0.05–3.00 mol dm^?3 and at different temperatures (25–60°), indicated that they have slightly the same kinetic inertness, being the [Eu(H₂O)₉]³⁺ aqua ion the final product for europium. The rates of complex formation for [Ln(DOA3P)]^4? (Ln=Ce, Eu) were studied by UV/VIS spectroscopy in the pH range 5.6–6.8. The reaction intermediate [Eu(DOA3P)]* as ‘out‐of‐cage’ complex contains four H₂O molecules, while the final product, [Eu(DOA3P)]^4?, does not contain any H₂O molecule, as proved by steady‐state/time‐resolved luminescence spectroscopy.     

FTIR spectroscopy of alcohol and formate interactions with mesoporous TiO2 surfaces

The effects of pH and ultraviolet (UV) light with ligated formic acid on mesoporous TiO2 were characterized by transmission Fourier transform infrared (FTIR) spectroscopy and compared with adsorbed formate complexes. Surface-modified anatase thin films were prepared from acidic aqueous nanoparticulate anatase suspensions diluted with methanol and ethanol. Bands assigned to carboxylic acid groups displayed unique bonding character in the ligated formic acid on the anatase surface. For increased proton concentrations in the films, separation in -COO stretching bands (delta nu) for formic acid increased (increase in frequency for nuC=O and decrease in frequency for nuC-O). With UV exposure, surface-bound organics were rapidly removed by photocatalytic oxidation at 40 degrees C and 40% relative humidity (RH). In addition, the delta nu of the formic acid bands decreased as organics were mineralized to carbonates and CO2 with UV light. Aqueous formic acid adsorption experiments showed a distinctly different bonding environment lacking carbonate, and the delta nu for the carboxylic groups indicated a bridging bidentate coordination. The delta nu of the bands increased with increasing proton concentration, with both bands shifting to higher wavenumbers. The shifts may be ascribed to the influence of protonation on surface charge and the effect of that charge on the electronegativity of carboxylate groups bound to the surface. As alcohols are used in the mesoporous TiO2 solar cell preparation, implications of these surface modifications to dye-sensitized photovoltaics are discussed.     

Theoretical study of substituent and solvent effects on the thermodynamics for <Emphasis Type="Italic">cis</Emphasis>/<Emphasis Type="Italic">trans</Emphasis> isomerization and intramolecular rearrangements of 2,2′-diphenoquinones

Enthalpies (Δ_isom H _(g)^o), Gibbs free energies (Δ_isom G _(g)^o), and equilibrium constants (log K _isom) for the trans → cis isomerization of various 3,3′-, 4,4′-, and 5,5′- disubstituted 2,2′-diphenoquinones with a range of electron withdrawing and releasing moieties (methyl, fluoro, chloro, bromo, trifluoromethyl, and amino) were calculated in the gas phase and in the solvent phase (n-hexane, benzene, n-octanol, acetonitrile, and water). In the gas phase, the trans isomer of the parent and all substituted 2,2′-diphenoquinones is predicted to be more thermodynamically stable than the cis configuration, with log K _isom ranging from −2.8 to −7.0. For all compounds, increasing solvent polarity/proticity progressively favors shifting the cis/trans equilibrium towards greater contributions of the cis configuration and substantially increases the log K _isom by up to 5.1 units relative to the gas phase. In polar protic and polar aprotic solvents, the estimated log K _isom ranges as low as −0.4, indicating significant populations of the cis isomers should be present. The findings support the polar solvent phase mechanistic predictions for a cis configuration of 2,2′-diphenoquinones participating in the thermal transformation of trans-2,2′-diphenoquinones to oxepino[2,3-b]benzofurans. With limited exceptions for some amino derivatives, the cis-2,2′-diphenoquinone to oxepino[2,3-b]benzofuran isomerization is expected to be thermodynamically favorable for all substituents/phases under consideration. The cis-2,2′-diphenoquinone to oxepino[2,3-b]benzofuran rearrangement is predicted to become less thermodynamically favored with increasing solvent polarity/proticity.     

Methylcellulose/SiO<Subscript>2</Subscript> hybrids: sol-gel preparation and characterization by XRD,FTIR and AFM

Methylcellulose (MC) / SiO₂ organic / inorganic hybrid materials have been prepared from MC and methyltriethoxysilane or ethyltrimethoxysilane, and characterized by XRD, FTIR and AFM. XRD showed peak shifts. FTIR shows intermolecular hydrogen bonding between MC and SiO₂. AFM depicts surface roughness which depends on the silica precursor and MC content.      

New chiral Schiff's bases with a 1,3,4‐thiadiazole ring in the mesogenic core: synthesis,mesomorphic and ferroelectric properties

Two new homologous series of chiral esters derived from Schiff's bases containing a 1,3,4‐thiadiazole unit (series 6 and 7) were synthesized and their liquid crystalline and ferroelectric properties investigated. All the compounds of series 6 exhibit SmC*–SmA dimorphism and the compounds of series 7 exhibit a SmC* phase. All the compounds of these series are ferroelectric liquid crystals.     

Synthesis of α-Metoylene-γ-Lactones in Furanosidic Systems

Abstract

Synthesis of stereoisomeric α-methylene-γ-lactones in furanose-and furanuronoamide derivatives was easily accomplished by Reformatsky Reaction with ethyl bromcmethylacrylic ester and zinc. Pyridinium chlorochromate/3Å molecular sieve powder showed to be an excellent reagent for the oxidation of secondary hydroxyl groups of a furanose system and of α-hydroxy amides.     

Influence of pH and Matrix Components in the Chromatographic Response of Pesticides

The pH effect of potato, apple, and soil matrices on the chromatographic response of nine pesticides was evaluated. All chromatographic analyses were performed in duplicate on a gas chromatograph with electron capture detection. The matrix effect observed in the chromatographic response of the pesticides was evaluated by comparison. We compared the chromatographic response of each pesticide in pure solvent and in organic extract obtained for the matrices. The organic extracts were obtained by solid–liquid extraction with partition at low temperature. Depending on the matrix pH, a greater or lesser amount of co-extractives can be extracted into the organic phase, which affects the matrix effect. The pH of the samples before the extraction process was modified in order to check their influence on pesticide responses. Statistical analyses involving principal component analysis and marginal means revealed that, in the potato and apple matrices, the co-extractives exerted positive effects on the chromatographic response of the analytes. At lower pH, the extraction of co-extractives from potato and apple was favored, thus increasing the matrix effect for these samples.     

Preparation of polymer-supported gold nanoparticles based on resins containing ionic liquid-like fragments: easy control of size and stability

Crosslinked polymers containing covalently attached functional sites with chemical structures related to those present in ILs and having macroscopic properties very similar to the ones of the corresponding bulk ILs can be advantageously applied to the preparation of gold nanoparticles (AuNPs). The size and morphology of the resulting metal nanoparticles (MNPs) can be easily modulated through a proper combination of the synthetic method used for the generation of the NPs and the structural elements of the polymer. Additionally, the resulting supported AuNPs are demonstrated to be stable for at least eight months with the vials open to the atmosphere. Several synthetic methodologies have been studied, as well as different structural parameters for the functional polymers. Those include the chemical nature (anions and cations) and loading of the ionic liquid-like fragments and the morphology of the polymeric matrix. The results obtained show the potential to prepare supported AuNPs with narrow size distributions and small diameters that can have potential interest for application in different fields.     

Preparation and characterization of octadecyl acrylate monoliths for capillary electrochromatography by photochemical,thermal, and chemical initiation†

Monolithic stationary phases based on octadecyl acrylate for CEC using different initiating systems (UV irradiation, thermal, and chemical initiation) in the presence of lauroyl peroxide as initiator were synthesized. For each initiation mode, the influence of the porogenic solvent composition on both the morphological and electrochromatographic properties of the resulting monoliths was investigated. Under optimal conditions, excellent efficiencies for the photochemically and chemically polymerized monoliths (minimum plate heights of 6.9–10.7 and 6.5–12.6 μm, respectively) were achieved. Thermally initiated columns gave lower efficiency values, permeabilities, and longer analysis times compared to these initiating systems. The produced monolithic stationary phases were evaluated in terms of reproducibility and gave RSD values below 9.2, 10.6, and 9.8% for UV, thermally, and chemically initiated columns, respectively.