Feasibility of using solid sampling graphite furnace atomic absorption spectrometry for speciation analysis of volatile and non-volatile compounds of nickel and vanadium in crude oil

A method for the direct determination of volatile and non-volatile nickel and vanadium compounds in crude oil without previous treatment using direct solid sampling graphite furnace atomic absorption spectrometry is proposed. The crude oil samples were weighed directly onto solid sampling platforms using a microbalance and introduced into a transversely heated solid sampling graphite tube. In previous work of our group losses of volatile nickel and vanadium compounds have been detected, whereas other nickel and vanadium compounds were thermally stable up to 1300 and 1600 °C, respectively. In order to avoid this problem different chemical modifiers (conventional and permanent) have been investigated. With 400 μg of iridium as permanent modifier, the signal started to drop already after two atomization cycles, possibly because of an interaction of nickel (which is a catalyst poison) with iridium. Twenty micrograms of palladium applied in each determination was found to be optimum for both elements. The palladium was deposited on the platform and submitted to a drying step at 150 °C for 75 s. After that the sample was added onto the platform and submitted to the furnace program. The influence of sample mass on the linearity of the response and on potential measurement errors was also investigated using four samples with different nickel content. For the sample with the lowest nickel concentration the relationship between mass and integrated absorbance was found to be non-linear when a high sample mass was introduced. It was suspected that the modifier had not covered the entire platform surface, which resulted in analyte losses. This problem could be avoided by using 40 μL of 0.5 g L⁻¹ Pd with 0.05% Triton X-100. Calibration curves were established with and without modifier, with aqueous standards, oil-in-water emulsions and the certified reference material NIST SRM 1634c (trace metals in residual fuel oil). The sensitivity for aqueous standards and emulsions was close to that for SRM 1634c, making possible the use of aqueous standards for calibration. The limits of detection and quantification obtained for nickel and vanadium under this condition were found to be 0.02 and 0.06 μg g⁻¹, respectively, for both elements, based on 10 mg of sample. Nickel and vanadium were determined in the samples with (total Ni and V) and without the use of Pd (thermally stable compounds), and the concentration of volatile compounds was calculated by difference. The results were compared with those obtained by high-resolution continuum source graphite furnace atomic absorption spectrometry by emulsion technique; no significant differences were found for total Ni and V at the 95% confidence level according to a Student's t-test.     

Synthesis and biological evaluation of 6-oxa-nor-tropane glycomimetics as glycosidase inhibitors

The preparation of polyhydroxylated 6-oxa-nor-tropane glycomimetics structurally related to the glycosidase inhibitor family of the calystegines is reported. The synthetic strategy involves the furanose→piperidine rearrangement of 5-deoxy-5-ureido-l-idose precursors, followed by intramolecular glycosylation involving the primary hydroxyl group. Inversion of the configuration at C-3 in the resulting 6-oxa-(+)-calystegine B₂ analogue allows accessing the elusive 3-epi-6-oxa-(+)-calystegine B₂ skeleton. Acid-catalyzed opening of the nor-tropane bicycle was observed, however, which could be avoided by careful neutralization of the reaction mixture. The inhibition results suggest that (+)-calystegine B₂ derivatives and the corresponding C-3 epimers can be seen as glucomimetics and galactomimetics, respectively, pointing to a 1-azasugar mode of action for this family of alkaloids.     

Adding water to sugar: a spectroscopic and computational study of alpha- and beta-phenylxyloside in the gas phase

The gas phase structures of phenyl alpha- and beta-d-xylopyranoside (alpha- and beta-pXyl) and their mono-hydrates have been investigated using a combination of resonant two-photon ionization (R2PI), ultra-violet hole-burning and resonant infrared ion dip spectroscopy, coupled with density functional theory (DFT) and ab initio computation. The hole-burning experiments indicate the population of a single conformer only, in each of the two anomers. Their experimental and calculated infrared spectra are both consistent with a conformational assignment corresponding to the computed global minimum configuration. All three OH groups are oriented towards the oxygen atom (O1) on the anomeric carbon atom to form an all trans(ttt) counter-clockwise chain of hydrogen bonds. The mono-hydrates, alpha- and beta-pXyl(H(2)O) each populate two distinct structures in the molecular beam environment, with the water molecule inserted between OH4 and OH3 or between OH3 and OH2 in alpha-pXyl(H2O), and between OH2 and O1 in either of two alternative orientations, in beta-pXyl(H2O). In all of the mono-hydrated xyloside complexes, the water molecule inserts into the weakest link of the sugar molecules' hydrogen-bonded chain of hydroxy groups, creating a single extended chain, strengthened by co-operativity. The all-trans configuration of the xylose moiety is retained and the mono-hydrate structures correspond to those calculated to lie at the lowest relative energies.     

Vascular endothelial and smooth muscle cell culture on NaOH-treated poly(epsilon-caprolactone) films: a preliminary study for vascular graft development

Tissue engineering offers the potential of providing vessels that can be used to replace diseased and damaged native blood vessels. The endothelization of a synthetic vascular graft minimizes the failures associated with blood clotting and platelet activation. The aim of this study was to culture vascular-derived endothelial and smooth muscle cells on both untreated and NaOH-treated poly(epsilon-caprolactone) (PCL) films, a biocompatible and bio-resorbable polymer, and to evaluate the behavior of both cell types as a preliminary study for vascular graft development. PCL films were prepared by hot pressing; characterized by DSC, IR, SEM, and scanning force microscopy; and treated with NaOH to increase the surface hydrophilicity before cell culture. Endothelial and smooth muscle cells, isolated from pig cava vein, were characterized by immunofluorescence and confocal microscopy studies of endothelial nitric oxide synthase and alpha-smooth muscle actin. Good adhesion, growth, viability and morphology of both the endothelial and smooth muscle cells on PCL films were obtained, but a light stimulation of mitochondrial activity was observed during short culture times. NaOH treatment improved the adhesion and enhanced the proliferation in both cell types. This verified the possible use of this modified polymer as a support in the preparation of a synthetic vascular graft. [Diagram: see text] SEM micrograph of smooth muscle cells cultured on NaOH-treated PCL film. (Original magnification: 1000x).     

Synthesis of donor-acceptor alkynylcyclopropanes by diastereoselective cyclopropanation of electron-deficient alkenes with alkoxyalkynyl Fischer carbene complexes

The reaction of electron-deficient alkenes with alkoxyalkynyl Fischer carbene complexes (FCCs) represents a straightforward route to a new type of captodative (donor-acceptor) alkynylcyclopropanes, which have been prepared in moderate to high yields and in a diastereoselective manner. Some studies regarding the employment of additives to facilitate the recovery of the metal moiety after the reaction are also described. Finally, the first example of a cyclopropanation reaction through employing Fischer carbene complexes under microwave irradiation is presented; this method proved to be an advantageous alternative to the thermal reaction.     

Determination of natural uranium by various analytical techniques in soils of Zacatecas State (Mexico)

Journal of Radioanalytical and Nuclear Chemistry - 238U is a radionuclide present in the earth’s crust that provides 65.9% of annual average radiation dose and represents 99.27% of total...     

Lectin-Mediated Drug Targeting: Discrimination of Carbohydrate-Mediated Cellular Uptake between Tumor and Liver Cells with Neoglycoconjugates Carrying Fucose Epitopes Regioselectively Modified in the 3-Position

The circumvention of efficient "carbohydrate traps" in the liver is required for targeting glycoconjugates on tumor cells. As shown in the model system of bovine serum albumin (BSA) conjugates, the nature of R(1)-R(3) of the fucose epitope plays an important role in the discrimination of cellular uptake between tumor and liver cells as well as in the cytotoxic activity.     

Quantitative detection of phosphoproteins by combination of two-dimensional difference gel electrophoresis and phosphospecific fluorescent staining

Here we combine a standard two-dimensional difference gel electrophoresis (DIGE) protocol with subsequent post-staining of gels with phosphospecific fluorescent Pro-Q Diamond dye. The combination of these two methods for fluorescence detection of proteins allows quantitative detection of phosphoproteins in 2-DE-gels. We established this protocol within a functional proteomics experiment. Mammary epithelial cells (EpH4) were stimulated in culture by epidermal growth factor (EGF), endosomal fractions prepared after subcellular fractionation and phosphorylated proteins successfully detected on endosomes. For instance, Endo A cytokeratin, known as phosphoprotein and differentiation marker inducible by MAPK signaling, was identified by matrix-assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF-MS). With this protocol, all steps of combined proteome and phosphoproteome profiling experiments are significantly simplified and accelerated, taking full advantage of both methods in terms of specificity, sensitivity and accuracy of quantification.     

Rhodopsin reconstituted into a planar-supported lipid bilayer retains photoactivity after cross-linking polymerization of lipid monomers

Transmembrane proteins (TMPs), particularly ion channels and receptors, play key roles in transport and signal transduction. Many of these proteins are pharmacologically important and therefore targets for drug discovery. TMPs can be reconstituted in planar-supported lipid bilayers (PSLBs), which has led to development of TMP-based biosensors and biochips. However, PSLBs composed of natural lipids lack the high stability desired for many technological applications. One strategy is to use synthetic lipid monomers that can be polymerized to form robust bilayers. A key question is how lipid polymerization affects TMP structure and activity. In this study, we have examined the effects of UV polymerization of bis-Sorbylphosphatidylcholine (bis-SorbPC) on the photoactivation of reconstituted bovine rhodopsin (Rho), a model G-protein-coupled receptor. Plasmon-waveguide resonance spectroscopy (PWR) was used to compare the degree of Rho incorporation and activation in fluid and poly(lipid) PSLBs. The results show that reconstitution of Rho into a supported lipid bilayer composed only of bis-SorbPC, followed by photoinduced lipid cross-linking, does not measurably diminish protein function.