Oxidative Transformations of Organic Compounds Mediated by Redox Molecular Sieves

Zeolites are viewed by some as the “philosopher's stone” of modern chemistry.^[1] They are more or less indispensable in oil refining and petrochemicals manufacture where they are widely applied as solid acid catalysts. More recently attention has been focused on their use in the manufacture of fine chemicals. The synthetic utility of zeolites and related molecular sieves (zeotypes) has been considerably extended by the incorporation of redox metals into their frameworks. The resulting redox molecular sieves catalyze a variety of selective oxidations under mild conditions in the liquid phase. Their structural diversity–including variation of the redox metal, incorporation of metal complexes, and the size and polarity of the micropores–provides the possibility of designing tailor-made solid catalysts (“mineral enzymes”) for liquid-phase oxidations with clean oxidants such as O₂, H₂O₂, and RO₂H. Hence, they have enormous potential in industrial organic synthesis as environmentally friendly alternatives to traditional oxidations employing inorganic oxidants in stoichiometric amounts. A primary aim of this review is to familiarize organic chemists with the synthetic potential of redox molecular sieves. An outline of their synthesis, structures, and chemical properties, highlighting their unique advantages, is followed by a discussion of general (mechanistic) features that influence the choice of a suitable catalyst for a particular type of oxidation. The main part of the review deals with the oxidation of various substrates of synthetic interest–such as alkanes, alkenes, (alkyl)arenes, alcohols, and amines–and emphasizes the advantages of redox molecular sieves (including selectivity and stability) over their homogeneous counterparts. New directions towards truly biomimetic solid catalysts, for example zeolite-encapsulated chiral metal complexes as heterogeneous catalysts for asymmetric oxidations, are high-lighted.     

Characterization of the triplet state of tris(8-hydroxyquinoline)aluminium(III) in benzene solution

The lowest triplet state of tris(8-hydroxyquinoline)aluminium(III) (Alq3) has been prepared by pulse radiolysis/energy transfer from appropriate donors in benzene solutions and has an absorption maximum around 510 nm with a lifetime of about 50 mus. It is quenched by molecular oxygen, leading to singlet oxygen formation. From flash photolysis and singlet oxygen formation measurements, a quantum yield of triplet formation of 0.24 was determined for direct photolysis of the complex. A value of 2.10 +/- 0.10 eV was determined for the energy of the lowest triplet state by energy transfer studies and was confirmed by phosphorescence measurements on Alq3, either in the heavy atom solvent ethyl iodide or photosensitized by benzophenone in benzene. Dexter (exchange) energy transfer was observed from triplet Alq3 to platinum(II) octaethylporphyrin.     

Evaluation of polymeric flocculants for oily water systems using a photometric dispersion analyzer

During oil production and treatment, oil-in-water (O/W) emulsions are formed. These dispersions require treatment prior to disposal. In order to improve oil/water separation processes through any physical process (decanting, flotation, centrifuging etc), the particle size of the dispersed phase should be increased. This may be obtained by a flocculation process, which consists in the agglomeration of several particles or drops using as flocculating agent hydrophilic high molecular weight macromolecules. Poly (ethylene-b-propylene oxide) and poly (vinyl alcohol) polymers have been evaluated as flocculating agents for oily water systems. Their performance is related to the particle size increase of the dispersed phase. In this work, a photometric dispersion analyzer (PDA) has been used to accomplish the oil drop agglomeration. Synthetic as well as produced water was used. Data are in good agreement with previous tests. Qualitative information related to aggregates or particle size distribution of the oily water systems can be obtained using PDA.     

Interaction and lipid-induced conformation of two cecropin-melittin hybrid peptides depend on peptide and membrane composition

The interaction of two hybrid peptides of cecropin A and melittin [CA(1-8)M(1-18) and CA(1-7)M(2-9)] with liposomes was studied by differential scanning calorimetry (DSC), circular dichroism (CD), and quasi-elastic light scattering (QELS). The study was carried out with large unilamellar vesicles (LUVs) of three different lipid compositions: 1,2-dimyristoil-sn-glycero-3-phosphocholine (DMPC), 1,2-dimyristoyl-sn-glycero-3-phospho-rac-(1-glycerol) (DMPG) and a binary mixture of DMPC/DMPG, in a wide range of peptide-to-lipid (P:L) molar ratios (0 to 1:7). DSC results indicate that, for both peptides, the interaction depends on membrane composition, with very different behavior for zwitterionic and anionic membranes. CD data show that, although the two peptides have different secondary structures in buffer (random coil for CA(1-7)M(2-9) and predominantly beta-sheet for CA(1-8)M(1-18)), they both adopt an alpha-helical structure in the presence of the membranes. Overall, results are compatible with a model involving a strong electrostatic surface interaction between the peptides and the negatively charged liposomes, which gives place to aggregation in the gel phase and precipitation after a threshold peptide concentration. In the case of zwitterionic membranes, a progressive surface coverage with peptide molecules destabilizes the membrane, eventually leading to membrane disruption. Moreover, delicate modulations in behavior were observed depending on the peptide.     

Optimization of Fluidized-Bed Extraction for Determination of Organochlorine Pesticides in Sediment

A new extraction technique, fluidized-bed extraction, has been investigated for isolation of organochlorine pesticides from sediment. The extraction was optimized, by means of a surface-response design, by considering the number of extraction cycles, the holding time after reaching the heating temperature, and the composition of the extraction solvent as experimental variables. The effect on method performance of the operating conditions used for fluidized-bed extraction was investigated. Special emphasis was given to accurate determination of p,p′-DDT, because DDT is known to be unstable during GC injection. To evaluate the extent of degradation of DDT, ¹³C₁₂-p,p′-DDT-solutions were analyzed and the amount of degradation during GC injection was calculated. ¹³C₁₂-p,p′-DDT was also added to sediment samples before extraction and the extent of degradation during the optimization experiment was investigated. Finally, classical Soxhlet extraction was compared with the optimized fluidized-bed extraction method.     

Molecular structure-activity relationships for the oxidation of organic compounds using mesoporous silica catalysts derivatised with bis(halogeno)dioxomolybdenum(VI) complexes

Mo K-edge XAFS spectra have been measured for ordered mesoporous silica MCM-41 grafted with the complexes [MoO2X2(thf)2] (X=Cl, Br). For grafting reactions in the absence of triethylamine, materials with 1 wt. % Mo are obtained; the Mo K-edge EXAFS results indicate the co-existence of isolated surface-fixed monomeric species [MoO2[(-O)3SiO]2(thf)(n)] and [MoO2[(-O)3SiO]X(thf)(n)]. When Et3N is used in the grafting reactions, materials with 4 wt. % Mo are obtained. The EXAFS data for the material prepared using [MoO2Cl2(thf)2] and Et3N indicate the presence of dinuclear species with two Mo(VI) centres, each with two Mo=O groups and each linked by one or two oxo bridges (Mo...Mo 3.27 A). The molybdenum centres in the material prepared using the dibromo complex comprise mainly isolated four-coordinate dioxomolybdenum(VI) and trioxomolybdenum(VI) monomeric species, with a small contribution from dimeric species. All materials were further characterised in the solid state by powder X-ray diffraction, N2 adsorption analysis, MAS NMR (13C, 29Si) and FTIR spectroscopy. The derivatised MCMs perform differently as catalysts in the liquid-phase oxidation of various olefins and alcohols with tert-butyl hydroperoxide. The highest alkene epoxidation activity was recorded for the catalysts with low metal loading, whereas the material containing oxo-bridged dimers had the highest activity for oxidation of alcohols. The recyclability of all the catalysts was tested: the catalytic activity of the derivatised materials tended to stabilize with ageing.     

Formation of a stable cyano-bridged dinuclear iron cluster following oxidation of the superoxide reductases from Treponema pallidum and Desulfovibrio vulgaris with K(3)Fe(CN)(6)

Superoxide reductases catalyze the monovalent reduction of superoxide anion to hydrogen peroxide. Spectroscopic evidence for the formation of a dinuclear cyano-bridged adduct after K(3)Fe(CN)(6) oxidation of the superoxide reductases neelaredoxin from Treponema pallidum and desulfoferrodoxin from Desulfovibrio vulgaris was reported. Oxidation with K(3)Fe(CN)(6) reveals a band in the near-IR with lambda(max) at 1020 nm, coupled with an increase of the iron content by almost 2-fold. Fourier transform infrared spectroscopy provided additional evidence with CN-stretching vibrations at 2095, 2025-2030, and 2047 cm(-)(1), assigned to a ferrocyanide adduct of the enzyme. Interestingly, the low-temperature electronic paramagnetic resonance (EPR) spectra of oxidized TpNlr reveal at least three different species indicating structural heterogeneity in the coordination environment of the active site Fe ion. Given the likely 6-coordinate geometry of the active site Fe(3+) ion in the ferrocyanide adduct, we propose that the rhombic EPR species can serve as a model of a hexacoordinate form of the active site.     

Seedling Development and Evaluation of Genetic Stability of Cryopreserved Dendrobium Hybrid Mature Seeds

Vitrification, a simple, fast, and recommended cryopreservation method for orchid germplasm conservation, was evaluated for Dendrobium hybrid “Dong Yai” mature seeds. The genetic stability of regenerated seedlings was also evaluated using flow cytometry. Mature seeds from this hybrid were submitted to plant vitrification solution (PVS2) for 0, 0.5, 1, 2, 3, 4, 5, or 6 h at 0 °C. Subsequently, they were plunged into liquid nitrogen (LN) at ?196 °C for 1 h and recovered in half-strength Murashige and Skoog culture medium (1/2 MS), and seed germination was evaluated after 30 days. Seeds directly submitted to LN did not germinate after cryopreservation. Seeds treated with PVS2 between 1 and 3 h presented the best germination (between 51 and 58 %), although longer exposure to PVS2 returned moderated germination (39 %). Germinated seeds were further subcultured in P-723 culture medium and developed whole seedlings in vitro after 180 days, with no abnormal characteristics, diseases, or nutritional deficiencies. Seedlings were successfully acclimatized under greenhouse conditions with over 80 % survival. Flow cytometry analysis revealed no chromosomal changes on vitrified seedlings, as well as seedlings germinated from the control treatment (direct exposure to LN). These findings indicate that vitrification is a feasible and safe germplasm cryopreservation method for commercial Dendrobium orchid hybrid conservation.