(1)H relaxivity of water in aqueous suspensions of Gd(3+)-loaded NaY nanozeolites and AlTUD-1 mesoporous material: the influence of Si/Al ratio and pore size

The results of a (1)H nuclear magnetic relaxation dispersion (NMRD) and EPR study on aqueous suspensions of Gd(3+)-loaded NaY nanozeolites and AlTUD-1 mesoporous material are described. Upon increase of the Si/Al ratio from 1.7 to 4.0 in the Gd(3+)-loaded zeolites, the relaxation rate per mM Gd(3+) (r1) at 40 MHz and 25 degrees C increases from 14 to 27 s(-)1 mM(-1). The NMRD and EPR data were fitted with a previously developed two-step model that considers the system as a concentrated aqueous solution of Gd(3+) in the interior of the zeolite that is in exchange with the bulk water outside the zeolite. The results show that the observed increase in relaxivity can mainly be attributed to the residence lifetime of the water protons in the interior of the material, which decreased from 0.3 to 0.2 micros, upon the increase of the Si/Al ratio. This can be explained by the decreased interaction of water with the zeolite walls as a result of the increased hydrophobicity. The importance of the exchange rate of water between the inside and the outside of the material was further demonstrated by the relatively high relaxivity (33 s(-1) mM(-1) at 40 MHz, 25 degrees C) observed for a suspension of the Gd(3+)-loaded mesoporous material AlTUD-1. Unfortunately, Gd(3+) leaches rather easily from that material, but not from the Gd(3+)-loaded NaY zeolites, which may have potential as contrast agents for magnetic resonance imaging.     

Determination of interferon-gamma in Chinese hamster ovary cell culture supernatant by coupled-column liquid chromatography

A robust tandem HPLC method coupling size-exclusion (Shodex Asahipak GS-320HQ) and reversed phase (Vydac 218TP54) columns with ultraviolet detection was developed for quantitative determination of interferon-gamma (IFN-gamma) in Chinese hamster ovary cell culture supernatant. The 2D-HPLC system was linked up by a 6-port 2-position low hold-up volume switch valve. Compared to a commercial ELISA kit for IFN-gamma, the coupled column LC approach was able to detect and quantify soluble IFN-gamma, regardless of the glycoprotein's molecular/conformational variability and sample background. Each LC-LC analysis took 90 minutes inclusive of column regeneration. The relative standard deviation of measurements (n = 5) was less than 3%. The limit of detection (LOD) was determined to be 0.35 microg IFN-gamma.     

Preparation and Characterization of Graphite‐Epoxy Composite Modified with Zinc Hexacyanoferrate and Their Electrochemical Behaviour in Presence of Substituted Anilines

The growth of zinc hexacyanoferrate (ZnHCF) hybrid film on the surface of graphite‐epoxy composite (GEC) electrodes was demonstrated by cyclic voltammetry. Surface morphology of the hybrid film was investigated by using scanning electron microscopy. The effect of the type of monovalent cations on the redox behaviour of hybrid film was also studied. This effect indicated that the radius of the hydrated cation mainly determines the ion permeability of the film.     

Photosensitizing properties of triplet beta-lapachones in acetonitrile solution

The photochemical reactivity of β-lapachone ( 1 ), nor -β-lapachone ( 2 ) and 1,2-naphthoquinone ( 3 ) towards amino acids and nucleobases or nucleosides has been examined employing the nanosecond laser flash photolysis technique. Excitation (λ = 355 nm) of degassed solutions of 1 – 3 , in acetonitrile, resulted in the formation of their corresponding triplet excited states. These transients were efficiently quenched by l -tryptophan, l -tryptophan methyl ester, l -tyrosine, l -tyrosine methyl ester and l -cysteine ( k _q  ≈ 10⁹ L mol⁻¹ s⁻¹). For l -tryptophan, l -tyrosine and their methyl esters new transients were formed in the quenching process, which were assigned to the corresponding radical pair resulting from an initial electron transfer from the amino acids or their esters to the excited quinone, followed by a fast proton transfer. No measurable quenching rate constants could be observed in the presence of thymine and thymidine. On the other hand, efficient rate constants were obtained when 1 – 3 were quenched by 2'-deoxyguanosine ( k _q  ≈ 10⁹ L mol⁻¹ s⁻¹). The quantum efficiency of singlet oxygen (¹O₂) formation from 1 to 3 was determined employing time-resolved near-IR emission studies upon laser excitation and showed considerably high values in all cases (Φ_Δ = 0.6), which are fully in accord with the ππ* character of these triplets in acetonitrile.     

β-Phenylproline: the high β-turn forming propensity of proline combined with an aromatic side chain

The conformational propensities of the proline analogue bearing a phenyl substituent attached to the β carbon, in either a cis or a trans configuration relative to the carbonyl group, have been investigated. The behaviour of cis- and trans(βPh)Pro has been compared with that of proline in homochiral and heterochiral dipeptide sequences. NMR and IR studies as well as X-ray diffraction analysis provide evidence that the β-phenyl substituent does not disrupt the tendency of proline to occupy the i+1 position of a β-turn. The puckering of the pyrrolidine ring is significantly affected by the presence of the aromatic substituent, which tends to occupy positions that minimize steric repulsions. As a consequence, this substituent adopts specific well-defined orientations, which are more restricted for the cis derivative. Interactions between this aromatic group and that in the adjacent phenylalanine residue may be responsible for some of the conformational differences observed among the different peptides studied.     

The energetics of isomeric benzoxazine diones: isatoic anhydride revisited

The standard (p(o) = 0.1 MPa) molar enthalpy of formation of crystalline 2H-1,3-benzoxazine-2,4(3H)dione was measured, at T= 298.15 K, by static bomb calorimetry and the standard molar enthalpy of sublimation, at T= 298.15 K, was obtained using Calvet microcalorimetry. These values were used to derive the standard molar enthalpy of formation in the gaseous phase, T= 298.15 K, of -(401.0 +/- 3.5) kJ mol(-1). The standard molar enthalpy of sublimation of isatoic anhydride was recalculated, and our recommended experimental value for the standard molar enthalpy of formation in the gaseous phase, T= 298.15 K, is -(406.2 +/- 3.4) kJ mol(-1). Density functional calculations for the two isomers 2H-1,3-benzoxazine-2,4(3H)dione and isatoic anhydride, in which the ring nitrogen and oxygen have been transposed, confirm the experimental evidence of nearly identical thermochemical stability for these isomers.     

Three-vector correlation in statistical reactions: the role of the triatomic parity

This article presents a methodology for the determination of the k-j-k' three-vector correlation assuming a statistical model for atom-diatom reactions; k and k' are the reagent-approach and product-recoil directions, respectively, and j is the rotational angular momentum of the reagent diatomic. Although the polarization of reagent angular momentum is in most cases negligible, conservation of the triatomic parity imposes a certain polarization for some combinations involving low reagent and product rotational states. Statistical and quantum-mechanical polarization-dependent differential cross sections were calculated for the barrierless D(+) + H(2)(v = 0,j) → HD(v' = 0,j') + H(+) reaction. The agreement between the two is in most cases excellent, confirming the statistical character of the reaction at low and moderate collision energies.     

Copper(II) complexes of bis(amino amide) ligands: effect of changes in the amino acid residue

A family of ligands derived from bis(amino amides) containing aliphatic spacers has been prepared, and their protonation and stability constants for the formation of Cu(2+) complexes have been determined potentiometrically. Important differences are associated to both the length of the aliphatic spacer and the nature of the side chains derived from the amino acid. In general, ligands containing aliphatic side chains display higher basicities as well as stability constants with Cu(2+). In the same way, basicities and stability constants tend to increase when decreasing the steric hindrance caused by the corresponding side-chain. FT-IR, UV-vis and ESI-MS were used for analyzing the complex species detected in the speciation diagram. UV-vis studies showed the presence of different coordination environments for the copper(II) complexes. Complexes with different stoichiometries can be formed in some instances. This was clearly highlighted with the help of ESI-MS experiments.     

An accelerating-reporting group for studies of radical heterolysis reactions and its application in an acid-catalyzed fragmentation reaction of an alpha,beta-dimethoxy radical

The 2,2-diphenylcyclopropyl group was employed to accelerate reactions of alpha-methoxy radicals containing beta-leaving groups, to trap the products of either migration or heterolysis of the leaving group, and to provide a useful chromophore for laser flash photolysis kinetic studies. The reporting group biases reactions in favor of heterolytic fragmentation and most likely intercepts radical cations in ion pairs. The 1-methoxy-1-methyl-2-(diethylphosphatoxy)-2-(2,2-diphenylcyclopropyl)ethyl radical (3a) reacted faster than the kinetic resolution of the instrument (k > 2 x 10(8) s(-1)) in all solvents studied, and the 2-acetoxy analogue (3b) reacted much faster than related radicals that do not contain the cyclopropyl group (e.g., k = 1.1 x 10(6) s(-1) in CH3CN at ambient temperature). The rate constants and Arrhenius parameters for reactions of 3b indicated that the rate-limiting step in the reaction was heterolytic cleavage. The 1,2-dimethoxy-1-methyl-2-(2,2-diphenylcyclopropyl)ethyl radical (26) reacted in a general acid-catalyzed heterolysis reaction, and rate constants for protonation of the beta-methoxy group by a series of carboxylic acids were determined. The results suggest that acid-catalyzed reactions of beta-alkoxy radicals might be employed in synthetic conversions.     

Formation of self-assembled chains of tetrathiafulvalene on a Cu(100) surface

Formation of self-assembled chains of tetrathiafulvalene (TTF) on the Cu(100) surface has been investigated by scanning tunneling microscopy and density functional theory calculations that include semiempirical van der Waals (vdW) interaction corrections. The calculations show that the chain structures observed in the experiments can only be explained by including the vdW interactions. The molecules are tilted along the chain in order to achieve maximal intermolecular interaction. The chains are metastable on the surface, which is consistent with the experimental observation that they disappear after annealing. The fact that all TTF chains observed in the experiment are short might be possibly explained by the interplay between the stabilizing vdW molecule-molecule interaction and the destabilizing rearrangement of surface atoms due to the strong molecule-substrate interaction.