Ultrawidely tunable single-mode fiber acousto-optic filter

A single-mode fiber (SMF) acousto-optic tunable filter (AOTF) with a tuning range of more than 300 nm is demonstrated. The SMF used in the experiment has a ring of symmetric holes within the cladding, which causes a larger mode-index difference between the first and the second higher-order antisymmetric modes than those of a conventional SMF. As a result, the difference in beatlengths between the core mode and the higher-order modes is highly increased, which makes it possible for the SMF AOTF to exhibit a single resonance peak in the transmission spectrum over the wavelength range of 1.3-1.6 μm for given acoustic frequencies of 3.1-3.8 MHz.     

Analysis of staphylococcal enterotoxin A in milk by matrix-assisted laser desorption/ionization-time of flight mass spectrometry

Staphylococcal enterotoxin A (SEA) is an exotoxin excreted mainly by Staphylococcus aureus and nowadays is the most prevalent compound in staphylococcal food poisoning worldwide. SEA is highly heat-resistant, and usual cooking times and temperatures are unlikely to completely inactivate it. A procedure for extraction of this toxin based on protein precipitation with a mixture of dichloromethane and acidified water was used before SDS-PAGE separation of soluble proteins. Finally, bands of interest were excised from the gel and in-gel enzymatic digestion was done. SEA from pasteurized milk was detected with matrix-assisted laser-desorption/ionization-time of flight (MALDI-TOF) mass spectrometry. Nineteen peptides (range 800-2400 Da) were identified as products of trypsin cleavage of the SEA standard with a score of 204 and 73% coverage of the protein sequence, whereas thirteen peptides were revealed for SEA extracted from milk with a score of 148 and 58% sequence coverage obtained. This procedure has been applied successfully for identification of SEA in milk.     

Crystalline Morphology and Polymorphic Phase Transitions in Electrospun Nylon 6 Nanofibers

Uniform nylon 6 nanofibers with diameters around 200 nm were prepared by electrospinning. Polymorphic phase transitions and crystal orientation of nylon 6 in unconfined (i.e., as-electrospun) and a high T(g) (340 degrees C) polyimide confined nanofibers were studied. Similar to melt-spun nylon 6 fibers, electrospun nylon 6 nanofibers also exhibited predominant, meta-stable gamma crystalline form, and the gamma-crystal (chain) axes preferentially oriented parallel to the fiber axis. Upon annealing above 150 degrees C, gamma-form crystals gradually melted and recrystallized into the thermodynamically stable alpha-form crystals, which ultimately melted at 220 degrees C. Release of surface tension accompanied this melt-recrystallization process, as revealed by differential scanning calorimetry. For confined nanofibers, both the melt-recrystallization and surface tension release processes were substantially depressed; gamma-form crystals did not melt and recrystallize into alpha-form crystals until 210 degrees C, only 10 degrees C below the T(m) at 220 degrees C. After complete melting of nano-confined crystals at 240 degrees C and recrystallization at 100 degrees C, only alpha-form crystals oriented perpendicular to the nanofiber axis were obtained. In the polyimide-confined nanofibers, the Brill transition (from the monoclinic alpha-form to a high temperature monoclinic form) was observed at 180-190 degrees C, which was at least 20 degrees C higher than that in unconfined nylon 6 at approximately 160 degrees C. This, again, was attributed to the confinement effect.     

A pair of orthogonal frames

We start with a characterization of a pair of frames to be orthogonal in a shift-invariant space and then give a simple construction of a pair of orthogonal shift-invariant frames. This is applied to obtain a construction of a pair of Gabor orthogonal frames as an example. This is also developed further to obtain constructions of a pair of orthogonal wavelet frames.     

Vibronic coupling and polyatomic spectra

A theoretical account of the vibronic intensity borrowing in polyatomic spectra is described and applied to the 3200 Å n → π^* absorption of pyrazine and the 3700 Å π → π^* absorption of pyrene. It is shown that the asymmetry between absorption and emission, as well as the frequency of the inducing mode in the lowest excited singlet state, are correctly predicted for both of these systems.     

New supported beta-amino alcohols as efficient catalysts for the enantioselective addition of diethylzinc to benzaldehyde under flow conditions

[formula: see text] Polymeric monoliths 10 containing an amino alcohol moiety derived from an industrial waste material represent one of the best ligands for the enantioselective catalytic addition of ZnEt2 to benzaldehyde (99% ee), being recoverable and usable under flow conditions.     

Electrochemical genosensing properties of gold nanoparticle–carbon nanotube hybrid

We have investigated the electrochemical genosensing properties of gold nanoparticle–carbon nanotube hybrid. Thiolated oligonucleotide probes and mercaptohexanol were self-assembled onto the Au–CNT hybrid. The hybridization events of target oligonucleotides are monitored using electrochemical impedance spectroscopy, cyclic voltammetry and a.c. voltammetry techniques. A redox-active mediator is used to detect the oxidation of guanine residues. The as-fabricated genosensor is able to differentiate between complementary and mismatched hybridizations, relying on the oxidation current of the guanine residues mediated via .     

Effects of meniscus on the directional growth of potassium niobate single crystals

The study of meniscus effects on the directional growth of single crystals of potassium niobate (KNbO₃) with a [110]_pc oriented seed by the top-seeded-solution-growth technique has been described. The directional growth of KNbO₃ single crystals has been illustrated for different crystallographic orientations of the crystal. Experimental results show that the shape of the solution flux meniscus, which is determined by a number of growth parameters, has a significant effect on growth rates on different 100_pc, 010_pc and 001_pc type surfaces. Findings based on this work enable one to select a dominant growth direction and hence to engineer the geometrical shaping of resultant KNbO₃ single crystals through careful control of growth parameters. Maximum crystal dimensions for the grown KNbO₃ along [100]_pc and [001]_pc achieved in this work are 34.0 and 31.2 mm, respectively.