Synthesis and hydrolysis of substituted tetrahydropyrimidinium salts. Behaviour of the degradation products on varying pH

Reaction of 1,2-diaryl-3-methyl-1,4,5,6-tetrahydropyrimidinium iodides 1a-i with alkaline solutions afforded N-aroyl-N-aryl-N'-methyltrimethylenediamines 2a-i . Compounds 2 are stable under acid conditions but in neutral or alkaline media spontaneously rearrange giving N-aroyl-N'-aryl-N-methyltrimethylenediamines 3a-i . Treating compounds 3 with concentrated acids reverse reaction takes place. Kinetic studies were performed on this intramolecular N → N' aroyl transfer over the H_o-pH range -0.9 to 2.30. Compounds 3 undergo acyl transfer to give 2 by a mechanism which involves a change in the rate determining step from formation to acid-catalysed decomposition of a six-membered heterocyclic intermediate on going from H_o to pH values. The existence of maxima in the pH rate profile allow to determine apparent pKa values of the hexahydropyrimidine intermediates which gave good correlation with the Swain F substituent constants. Stability of these heterocycles was also predicted by determination of thermodinamic parameters. Comparisons are made with the behaviour of five-membered heterocyclic intermediates (imidazolidine derivatives) which were studied in an earlier paper.     

Fluorescence-based nitric oxide detection by ruthenium porphyrin fluorophore complexes

The ruthenium(II) porphyrin fluorophore complexes [Ru(TPP)(CO)(Ds-R)] (TPP = tetraphenylporphinato dianion; Ds = dansyl; R = imidazole (im), 1, or thiomorpholine (tm), 2) were synthesized and investigated for their ability to detect nitric oxide (NO) based on fluorescence. The X-ray crystal structures of 1 and 2 were determined. The Ds-im or Ds-tm ligand coordinates to an axial site of the ruthenium(II) center through a nitrogen or sulfur atom, respectively. Both exhibit quenched fluorescence when excited at 368 or 345 nm. Displacement of the metal-coordinated fluorophore by NO restores fluorescence within minutes. These observations demonstrate fluorescence-based NO detection using ruthenium porphyrin fluorophore conjugates.     

Squaric acid N-hydroxylamides: synthesis, structure, and properties of vinylogous hydroxamic acid analogues

The synthesis of squaric acid N-hydroxylamide esters 5 and amides 6 from dimethyl squarate 2a is described. These derivatives are analogues of the naturally occurring iron(III) chelator hydroxamic acid. On the basis of a comparative reactivity study, a concerted retro-Cope mechanism for the formation of the N-hydroxylamide esters 5 by reaction of dimethyl squarate with hydroxylamines is proposed. A preliminary iron(III) binding study of these hydroxamic acid analogues is presented, demonstrating binding of iron(III) to amides 6 in aqueous solutions, while the esters 5 did not show any sign of metal ion binding. 13C NMR spectroscopic data (chemical shift and spin-lattice relaxation time determination) of these and related derivatives delineate the resonance structures predominant in these molecules. The resonance structures of the derivatives rationalize their spectroscopic data, chemical reactivity, and iron(III) binding properties. Single-crystal X-ray structure analyses of squaric acid N-hydroxylamide ester 5b and squaric acid N-hydroxylamide amide 6c confirm their connectivity and provide structural evidence supporting the spectroscopically derived conclusions. The squaric acid N-hydroxylamides are potentially useful in the construction of chemosensors for iron(III).     

Photoactivation of pheophorbide a induces a mitochondrial-mediated apoptosis in Jurkat leukaemia cells

The mechanism of cell death by pheophorbide a (Pba) which has been established to be a potential photosensitizer was examined in experimental photodynamic therapy (PDT) on Jurkat cells, a human lymphoid tumor cell line. In 30-60 min after irradiation, Pba treated cells exhibited apoptotic features including membrane blebbing and DNA fragmentation. Pba/PDT caused a rapid release of cytochrome c from mitochondria into the cytosol. Sequentially, activation of caspase-3 and the cleavage of poly ADP-ribose polymerase (PARP) were followed. Meanwhile, no evidence of activation of caspase-8 was indicated in the cells. In experiments with caspase inhibitors, it was found that caspase-3 alone was sufficient initiator for the Pba-induced apoptosis of the cells. Pba specific emission spectra were confirmed in the mitochondrial fraction and the light irradiation caused a rapid change in its membrane potential. Thus, mitochondria were entailed as the crucial targets for Pba as well as a responsible component for the cytochrome c release to initiate apoptotic pathways. Taken together, it was concluded that the mode of Jurkat cell death by Pba/PDT is an apoptosis, which is initiated by mitochondrial cytochrome c release and caspase-3-pathways.     

Synthesis, characterization, and stability of Fe-MCM-41 for production of carbon nanotubes by acetylene pyrolysis

Fe-substituted MCM-41 molecular sieves with ca. 1, 2, and 3 wt % Fe were synthesized hydrothermally using different sources of colloidal silica (HiSil and Cab-O-Sil) and characterized by ICP, XRD, N2 physisorption, UV-vis, EPR, TPR, and X-ray absorption. Catalysts synthesized from Cab-O-Sil showed higher structural order and stability than those from HiSil. The local environment of Fe in the mesoporous material as studied by UV-vis reveals the dominance of framework Fe in all the as-synthesized Fe-MCM-41 samples. Dislodgement of some Fe species to extraframework location occurs upon calcination, and this effect is more severe for Fe-MCM-41 (2 wt %) and Fe-MCM-41 (3 wt %), as confirmed by EPR and X-ray absorption. These materials have been used as catalytic templates for the production of carbon nanotubes (CNTs) by acetylene pyrolysis at atmospheric pressure. A relationship between the Fe loading in MCM-41 and the carbon species produced during this reaction has been established. Using our optimized conditions for this system, Fe-MCM-41 with ca. 2 wt % Fe showed the best results with particularly high selectivity for single-wall carbon nanotube (SWNT) production. This catalyst was selective for carbon nanotubes with a low amount of amorphous carbon for a narrow range of temperatures from 1073 to 1123 K. To account for the different selectivity of these catalysts for CNTs production, the local environment and chemical state of Fe in the used catalyst was further probed by X-band EPR.     

Heat shock protein 27 interacts with vimentin and prevents insolubilization of vimentin subunits induced by cadmium

Vimentin is an intermediate filament that regulates cell attachment and subcellular organization. In this study, vimentin filaments were morphologically altered, and its soluble subunits were rapidly reduced via cadmium chloride treatment. Cadmium chloride stimulated three major mitogen-activated protein kinases (MAPKs): extracellular signal-regulated kinase (ERK), c-Jun N-terminal kinase (JNK), and p38, and led apoptotic pathway via caspase-9 and caspase-3 activations. In order to determine whether MAPKs were involved in this cadmium-induced soluble vimentin disappearance, we applied MAPK-specific inhibitors (PD98059, SP600125, SB203580). These inhibitors did not abolish the cadmium-induced soluble vimentin disappearance. Caspase and proteosome degradation pathway were also not involved in soluble vimentin disappearance. When we observed vimentin levels in soluble and insoluble fractions, soluble vimentin subunits shifted to an insoluble fraction. As we discovered that heat-shock protein 27 (HSP27) was colocalized and physically associated with vimentin in unstressed cells, the roles of HSP27 with regard to vimentin were assessed. HSP27-overexpressing cells prevented morphological alterations of the vimentin filaments, as well as reductions of soluble vimentin, in the cadmium-treated cells. Moreover, HSP27 antisense oligonucleotide augmented these cadmium-induced changes in vimentin. These findings indicate that HSP27 prevents disruption of the vimentin intermediate filament networks and soluble vimentin disappearance, by virtue of its physical interaction with vimentin in cadmium-treated SK-N-SH cells.     

Cyclometallated Pd(II) azido complexes containing 6-phenyl-2,2'-bipyridyl or 2-phenylpyridyl derivatives: synthesis and reactivity toward organic isocyanides and isothiocyanates

Cyclometallated palladium(II) azido complexes containing C,N,N- or C,N-donor ligands, [Pd(N(3))L](HL = 6-phenyl-2,2'-bipyridine or 2-phenylpyridyl derivatives), showed different reactivities toward organic isocyanides and isothiocyanates. In particular, aryl isocyanides (CN-Ar) underwent insertion into the orthometallated Pd-C bond on the phenyl moiety of the supporting ligand (L) in [Pd(N(3))L] or [Pd(N(3))(PR(3))L] to selectively give carbodiimido [[Pd(N=C=N-Ar)L]], imidoyl [[Pd(N(3))(-C=N-Ar)(PR(3))L]], or imidoyl carbodiimido complexes [[Pd(N=C=N-Ar)(-C=N-Ar)L] or [Pd(N=C=N-Ar)(-C=N-Ar)(PR(3))L]], depending on reaction conditions. Interestingly, reactions of [Pd(N(3))(PR(3))L] with organic isothiocyanates gave unusual dinuclear complexes [(micro-SCN(4)-R)PdL](2), exhibiting the concurrent S- and N-coordinating thio-tetrazole bridge.     

Asymmetric syntheses of fused bicyclic compounds by conjugate additions of allylic organolithium species to activated olefins and subsequent cyclizations

[reaction: see text]. Addition of the configurationally stable organolithium species produced by enantioselective deprotonation of N-Boc-N-(p-methoxyphenyl) allylamines to alpha,beta-unsaturated carbonyl compounds affords 1,4-addition products in good yields with high diastereomeric and enantiomeric ratios. Further transformations of these compounds provide [3.3.0]-, [4.3.0]-, [5.3.0]-, and [5.4.0]-carbocycles and heterocycles with high stereoselectivities.     

Optimization of the Conditions for the Cr (III) Adsorption on Activated Carbon

In order to understand the patterns of the adsorption equilibrium of Cr (III) on activated carbon, the adsorption process was studied by two different ways: classical batch experiments on commercial Norit and Merck activated carbons and their oxidized forms in a wide range of pHs; and extended time-based tests at the same pH values on the same adsorbents. This approach allowed us to understand the role of texture, chemical carbon surface functionality and experimental conditions (initial pH of the solution, contact time and adsorbate/adsorbent ratio) on the effectiveness of Cr (III) removal. The adsorption process of Cr (III) at (24 ± 1^∘C) on Merck and Norit activated carbons and their oxidized forms were studied at pH values between 1.5 and 5 (either adjusted or buffered). Chromium concentration was fixed at 200 ppm. The carbon loading ranged from 1.2 to 20 g/l. The carbon/Cr (III) solution contact time was varied from 0.5–1 month to 5 months, to ensure that the saturation of the carbon level was reached. According to the data obtained, the presence of carboxylic groups on carbon surface seems to enhance Cr (III) uptake at initial pH of the solution in the range between 2 and 4. Depending on the nature of the adsorbent surface chemistry, the contact time to reach equilibrium may range from 3 to 5 months. There is an optimum carbon loading which limits the Cr (III) uptake/removal at given pH value. In order to understand the adsorption process, an ion exchange, surface complex and surface precipitation were considered. This paper was presented in the 5th Brazilian Meeting on Adsorption, held at Natal, Brazil, 18-21 July, 2004.     

Crystalline Morphology and Polymorphic Phase Transitions in Electrospun Nylon 6 Nanofibers

Uniform nylon 6 nanofibers with diameters around 200 nm were prepared by electrospinning. Polymorphic phase transitions and crystal orientation of nylon 6 in unconfined (i.e., as-electrospun) and a high T(g) (340 degrees C) polyimide confined nanofibers were studied. Similar to melt-spun nylon 6 fibers, electrospun nylon 6 nanofibers also exhibited predominant, meta-stable gamma crystalline form, and the gamma-crystal (chain) axes preferentially oriented parallel to the fiber axis. Upon annealing above 150 degrees C, gamma-form crystals gradually melted and recrystallized into the thermodynamically stable alpha-form crystals, which ultimately melted at 220 degrees C. Release of surface tension accompanied this melt-recrystallization process, as revealed by differential scanning calorimetry. For confined nanofibers, both the melt-recrystallization and surface tension release processes were substantially depressed; gamma-form crystals did not melt and recrystallize into alpha-form crystals until 210 degrees C, only 10 degrees C below the T(m) at 220 degrees C. After complete melting of nano-confined crystals at 240 degrees C and recrystallization at 100 degrees C, only alpha-form crystals oriented perpendicular to the nanofiber axis were obtained. In the polyimide-confined nanofibers, the Brill transition (from the monoclinic alpha-form to a high temperature monoclinic form) was observed at 180-190 degrees C, which was at least 20 degrees C higher than that in unconfined nylon 6 at approximately 160 degrees C. This, again, was attributed to the confinement effect.