Copper(II)-catalysed aerobic oxidation of primary alcohols to aldehydes

[CuBr2(2,2'-bipyridine)] catalyses the selective and very mild aerobic oxidation of primary alcohols to aldehydes in acetonitrile:water (2:1) in the presence of 2,2,6,6-tetramethylpiperidinyl-1-oxy (TEMPO) and a base as cocatalysts.     

Growth of Chlorella vulgaris on Sugarcane Vinasse: The Effect of Anaerobic Digestion Pretreatment

Microalgae farming has been identified as the most eco-sustainable solution for producing biodiesel. However, the operation of full-scale plants is still limited by costs and the utilization of industrial and/or domestic wastes can significantly improve economic profits. Several waste effluents are valuable sources of nutrients for the cultivation of microalgae. Ethanol production from sugarcane, for instance, generates significant amounts of organically rich effluent, the vinasse. After anaerobic digestion treatment, nutrient remaining in such an effluent can be used to grow microalgae. This research aimed to testing the potential of the anaerobic treated vinasse as an alternative source of nutrients for culturing microalgae with the goal of supplying the biodiesel industrial chain with algal biomass and oil. The anaerobic process treating vinasse reached a steady state at about 17 batch cycles of 24 h producing about 0.116 m³CH₄ kgCOD_vinasse ^?1. The highest productivity of Chlorella vulgaris biomass (70 mg l^?1 day^?1) was observed when using medium prepared with the anaerobic digester effluent. Lipid productivity varied from 0.5 to 17 mg l^?1 day^?1. Thus, the results show that it is possible to integrate the culturing of microalgae with the sugarcane industry by means of anaerobic digestion of the vinasse. There is also the advantageous possibility of using by-products of the anaerobic digestion such as methane and CO₂ for sustaining the system with energy and carbon source, respectively.     

The Effect of Gluconate and EDTA on Thorium Solubility Under Simulated Cement Porewater Conditions

α-Hydroxy carboxylate ligands like gluconate or polyaminocarboxylate ligands such as ethylenediaminetetraacetate (EDTA) are frequently used in decontamination procedures at nuclear power plants. The presence of these organic substances among nuclear wastes could enhance the solubility of actinides by forming soluble complexes. Thermodynamic data on the stability of gluconate and EDTA with actinides are essential to predict their increase in mobility, especially in high pH systems characteristic of cement environments of a nuclear waste repository. In this work, the solubility of thorium oxyhydroxide in the presence of gluconate and EDTA has been studied. The results highlight the key role of these organics in increasing the solubility of thorium at pH_c = 12. The presence of calcium at concentrations below 10^?2 mol·dm^?3 (characteristic of cement porewaters corresponding to cement compositions at the second degradation stage) does not seem to affect significantly the thorium solubility under the studied conditions.     

Sol–gel silica hybrid biomaterials for application in biodegradation of toxic compounds

The purpose of the present work is the sol–gel synthesis, structure characterization and potential application of hybrid biomaterials based on silica precursor (MTES) and natural polymers such as gelatin or pectin. The structure formation in the biomaterials was investigated by XRD, FTIR, BET and AFM. The results showed that all studied hybrid biomaterials have an amorphous structure. The FT-IR spectra of the obtained materials with MTES showed chemical bonds at 2,975, 1,255, 880 and 690 cm⁻¹ due to the presence of Si–O–R (CH₃ and C₂H₅) and Si–C bonds. In the samples synthesized with TEOS the inorganic and organic components interact by hydrogen bonding, Van der Waals or electrostatic forces. Surface area of investigated samples decreases with increasing of the natural polymers content. The structure evolution was studied by AFM and roughness analysis. Depending on the chemical composition a different design and size of particles and their aggregates on the surface structure were established. The hybrid biomaterials were used for immobilization of bacterial cells and applied in the biodegradation of the toxic compound 4-chlorobutyronitrile, possible constituent of waste water effluents in a laboratory glass bioreactor. Optimization of the process at different temperatures was carried out.     

Formation of a stable cyano-bridged dinuclear iron cluster following oxidation of the superoxide reductases from Treponema pallidum and Desulfovibrio vulgaris with K(3)Fe(CN)(6)

Superoxide reductases catalyze the monovalent reduction of superoxide anion to hydrogen peroxide. Spectroscopic evidence for the formation of a dinuclear cyano-bridged adduct after K(3)Fe(CN)(6) oxidation of the superoxide reductases neelaredoxin from Treponema pallidum and desulfoferrodoxin from Desulfovibrio vulgaris was reported. Oxidation with K(3)Fe(CN)(6) reveals a band in the near-IR with lambda(max) at 1020 nm, coupled with an increase of the iron content by almost 2-fold. Fourier transform infrared spectroscopy provided additional evidence with CN-stretching vibrations at 2095, 2025-2030, and 2047 cm(-)(1), assigned to a ferrocyanide adduct of the enzyme. Interestingly, the low-temperature electronic paramagnetic resonance (EPR) spectra of oxidized TpNlr reveal at least three different species indicating structural heterogeneity in the coordination environment of the active site Fe ion. Given the likely 6-coordinate geometry of the active site Fe(3+) ion in the ferrocyanide adduct, we propose that the rhombic EPR species can serve as a model of a hexacoordinate form of the active site.     

Optimisation of a key cross-coupling reaction towards the synthesis of a promising antileishmanial compound

During the course of a research program aimed at identifying novel antileishmanial compounds, a multi-gram synthesis of N-(trans-4-((4-methoxy-3-((R)-3-methylmorpholino)-1H-pyrazolo[3,4-d]pyrimidin-6-yl)amino)cyclohexyl)-2-methylpropane-1-sulfonamide ((R)-1) was required. This letter describes optimisation of the reaction conditions and protecting group strategy for a key Buchwald-Hartwig coupling, delivering the required quantities of (R)-1, as well as further compounds in the series.     

Synthesis of two new thioesters bearing ferrocene: Vibrational characterization and ab initio calculations. X-ray crystal structure of S-(2-methoxyphenyl)ferrocenecarbothioate

Structural and conformational properties of S-benzyl ferrocenecarbothioate (I) and S-(2-methoxyphenyl) ferrocenecarbothioate (II) are analyzed using data obtained from X-ray diffraction, vibrational data and theoretical calculations. According to chemical quantum calculations, the synperiplanar and antiperiplanar forms are found as the first and second more stable conformations, respectively, for the title compounds. The geometric parameters and normal modes of vibration were calculated using a density functional theory method (B3LYP) and the 6-31+G∗∗ basis set for all atoms except for iron. For this atom the calculations were carried out with the Lanl2dz basis set. The calculated parameters are in good agreement with the corresponding X-ray diffraction values. The combined experimental and theoretical approach allows a consistent assignment for most of the fundamental modes.     

Prediction of aqueous solubilities of solid carboxylic acids with COSMO-RS

The methodology for the prediction of aqueous solubilities of solid organic compounds, and their temperature dependence, based on the Conductor-like Screening Model for Real Solvents (COSMO-RS/COSMOtherm) procedure, is presented and evaluated. The predictive capability of the quantum chemistry based program and the applied methodology was tested on the most common solid carboxylic acids. From the temperature dependence of the solubilities, the mean apparent enthalpies of solution were derived. The results obtained for a set of 27 carboxylic acids, consisting of aromatic carboxylic acids, dicarboxylic acids, as well as hydroxycarboxylic acids, are in good agreement with the experimental solubility data and their dependence with the temperature. The mean apparent enthalpies of solution, although of the same order of magnitude of the experimentally values, seem to be systematically underestimated.     

Micro and nanoparticles in biosensing systems for food safety and environmental monitoring. An example of converging technologies

We report on the integration of micro and nanostructured materials in biosensing devices to obtain analytical nano-bio-systems with improved performance. The simplest case of electrochemical biosensing presented here is based on graphite microparticles to obtain a graphite-epoxy composite. The integration of the bioreceptor within the composite provides an analytical biosystem with improved performances for biosensing. The further addition of gold nanoparticles results in an analytical nano-bio-system which allows an improved strategy for the immobilization of the bioreceptor. And finally, the integration of magnetic beads to graphite-epoxy composite magneto electrodes provides further advantages in terms of separation of the analyte from complex matrix and enhanced biological reactions, resulting in analytical magneto-nano-bio-systems. The application of these systems mainly in food safety and environmental monitoring are reported. The benefits of the integration of these materials to obtain improved analytical systems are discussed and represent an example of converging technologies.