Flow and heat transfer characteristics of drag reducing surfactant solution in a helically coiled pipe

The reduction characteristic of turbulent drag and heat transfer of drag reduction surfactant solution flowing in a helically coiled pipe were experimentally investigated. The drag reduction surfactant used in the present study was the amine oxide type nonionic surfactant of oleyldihydroxyethylamineoxide (ODEAO, C₂₂H₄₅NO₃=371). The zwitterion surfactant of cetyldimethylaminoaciticacidbetaine (CDMB, C₂₀H₄₁NO₂=327) was added by 10% to the ODEAO solution in order to avoid the chemical degradation of ODEAO by ionic impurities in a test tape water. The experiments of flow drag and heat transfer reduction were carried out in the helically coiled pipe of coil to pipe diameter ratio of 37.5 and the helically coiled pipe length to pipe diameter of 1180.5 (pipe diameter of 14.4 mm) at various concentrations, temperatures and flow velocities of the ODEAO surfactant solution. The ODEAO solution showed a non-Newtonian behavior at high concentration of the ODEAO. From the experimental results, it was observed that the friction factor of the ODEAO surfactant solution flowing through the coiled pipe was decreased to a great extent in comparison with water as a Newtonian fluid in the turbulent flow region. Heat transfer measurements for water and the ODEAO solution were performed in both laminar and turbulent flow regions under the uniform heat flux boundary condition. The heat transfer coefficients for the ODEAO solution flow were the same as water flow in the laminar region. On the other hand, heat transfer reduction of the ODEAO solution flow was remarkedly reduced as compared with that of the water flow in the turbulent flow region.     

Runge-Kutta methods without order reduction for linear initial boundary value problems

Summary. It is well-known the loss of accuracy when a Runge–Kutta method is used together with the method of lines for the full discretization of an initial boundary value problem. We show that this phenomenon, called order reduction, is caused by wrong boundary values in intermediate stages. With a right choice, the order reduction can be avoided and the optimal order of convergence in time is achieved. We prove this fact for time discretizations of abstract initial boundary value problems based on implicit Runge–Kutta methods. Moreover, we apply these results to the full discretization of parabolic problems by means of Galerkin finite element techniques. We present some numerical examples in order to confirm that the optimal order is actually achieved. Received July 10, 2000 / Revised version received March 13, 2001 / Published online October 17, 2001     

Magnetic and dielectric properties of InFe2O4, InFeCuO4, and InGaCuO4

The magnetic and dielectric properties of InFe2O4, InFeCuO4, and InGaCuO4 have been investigated. All these materials are isostructural with RFe2O4 (R = Y, Ho-Lu), which shows ferroelectricity due to iron-valence ordering. InFe2O4 exhibits ferrimagnetic ordering at T(C) approximately 242 K and a dielectric constant (epsilon) of approximately 10,000 at around room temperature. These properties resemble those of RFe2O4; the origins of the magnetic and dielectric phenomena are likely common in InFe2O4 and RFe2O4. From measurements of the other two materials, we found that both T(C) and epsilon are decreased in the order of InFe2O4, InFeCuO4, and InGaCuO4. This result strongly supports the previously reported explanation based on an electron transfer between the Fe-site ions for the corresponding rare-earth systems. Therefore, we propose that the dielectric properties of the oxides isostructural with RFe2O4 are plausibly governed by electron transfer; this situation is different from that of ordinary ferroelectrics and dielectrics, in which the displacement of cations and anions is important. In addition, InFeCuO4 and InGaCuO4 exhibit large epsilon values (epsilon > approximately 1500). In consideration of this property, we discuss the possible applications of these oxides.     

One-Pot Tandem Michael Addition/Enantioselective Conia-Ene Cyclization Mediated by Chiral Iron(III)/Silver(I) Cooperative Catalysis

The first one-pot tandem Michael addition/enantioselective Conia-ene cyclization of N-protected prop-2-yn-1-amines with 2-methylene-3-oxoalkanoates promoted by chiral iron(III)/silver(I) cooperative catalysts has been developed. Alkyl 4-methylenepyrrolidine-3-acyl-3-carboxylates, which can be transformed into β-proline derivatives, are obtained in high yield with high enantioselectivity.     

Interaction of tri-O-methyl-β-cyclodextrin with drugs

Summary The effect of tri-O-methyl--cyclodextrin(methyl--CD) on the partition coefficients of drugs, such as p-nitrophenol, salicylic acid, benzoic acid, and aspirin, was studied at 25°C. The partition coefficients of these drugs were increased linearly with methyl--CD concentration. The increase of partition coefficients was interpreted by the 11 complex formation between methyl--CD and the drug in CHCl₃ phase.The interaction between p-nitrophenol and methyl--CD in solution was studied by UV and PMR spectroscopies. It was concluded that p-nitrophenol is included in the cavity of methyl--CD in both aqueous solution and CHCl₃ solution.Inclusion compounds of these drugs with methyl--CD in the solid state were studied by X-ray diffractometry, IR spectroscopy, and DSC measurements. 11 crystalline inclusion compounds were obtained from hot water. It is also suggested that amorphous inclusion compound was obtained by the grinding of drug with methyl--CD.The dissolution rate and the bioavailability of ketoprofen were significantly increased in the presence of methyl--CD. The bioavailability of ketoprofen after oral administration with methyl--CD to rats was 3.7 times that of ketoprofen alone.     

Synthesis and characterization of mesoporous zinc layered hydroxide-isoprocarb nanocomposite

The ion exchange method was used to intercalate a poor water-soluble insecticide, isoprocarb into zinc layered hydroxide (ZLH). PXRD analysis indicated the successful intercalation with good crystallinity for the resulting nanocomposite, with a basal spacing of 33.1 Å. FTIR analyses showing the resemblance of an absorption peak of the nanocomposite with the host and the guest anion. The thermal analysis confirmed that the nanocomposite had better thermal stability compared to the pristine isoprocarb. The nanocomposite also characterized by elemental and surface morphology analysis. The surface analyses of the host and nanocomposite showed mesoporous-type material characteristics. On the whole, the intercalation process decreased the pore size of the nanocomposite compared to the pristine host, layered zinc layered hydroxide-sodium dodecyl sulphate (ZLH-SDS). The obtained material is believed has a great potential as an environmentally friendly insecticide.     

Effect of finishing methods on surface roughness and color stability in all-ceramic systems

The objectives of the study were to evaluate the effect of the finishing methods on the surface roughness, and to investigate changes in CIE L*a*b* color coordinates of all-ceramic systems after different finishing methods and accelerated aging. Sixty specimens were prepared, 20 specimens each for Vitadur-N, IPS Empress II, and Cerec Vita Block Mark II. The surface roughness (Ra) following treatment with the different finishing methods was measured using a profilometer. Surface examinations in all groups were made by using a scanning electronic microscope. CIE L*a*b* values of the specimens were determined. After all specimens were subjected to accelerated aging, color measurements were repeated, and the total color differences (ΔE) were calculated. Data were analyzed statistically. Significant differences in surface roughness among all-ceramics were found (P < 0.05). No significant differences were found between the surface roughness of the glazed and polished all-ceramics (P > 0.05). After accelerated aging, all groups had acceptable color changes (ΔE < 2).