Synthesis and stereochemical studies of 1- and 2-phenyl-substituted 1,3-oxazino[4,3-a]isoquinoline derivatives

Starting from the 1′- or 2′-phenyl-substituted 1-(2′-hydroxyethyl)-6,7-dimethoxy-1,2,3,4-tetrahydroisoquinoline diastereomers 3 and 6, 4-unsubstituted and 4-(p-nitrophenyl)- and 4-oxo-substituted 1-phenyl- and 2-phenyl-9,10-dimethoxy-2H,4H-1,6,7,11b-tetrahydro-1,3-oxazino[4,3-a]isoquinolines (7-12) were prepared. The relative configurations and the predominant conformations of the products were determined by NMR spectroscopy, by quantum chemical calculations and, for (2R^∗,4S^∗,11bR^∗)-9,10-dimethoxy-4-(p-nitrophenyl)-2-phenyl-2H,4H-1,6,7,11b-tetrahydro-1,3-oxazino[4,3-a]isoquinoline (11), by X-ray diffraction.     

Analysis of multiple pesticide residues in tobacco using pressurized liquid extraction, automated solid-phase extraction clean-up and gas chromatography-tandem mass spectrometry

A new method was developed for the analysis of pesticide residues in tobacco. The objective was to significantly increase the number of samples that can be processed by the laboratory and to enable the extension of the current coverage to additional pesticides. A new analytical approach was therefore defined based on two main axes, the automation of the sample preparation and the selectivity of the analyte detection using tandem mass spectrometry. This latter aspect reduces the stringency of the requirements placed on the clean-up of the extracts and on the chromatographic resolution when less selective detectors are used. The extraction of the analytes from the matrix is performed using the pressurized liquid extraction technique. Tobacco samples are extracted at elevated temperature and pressure (100 C and 100 atm; 1 atm = 101,325 Pa) using acetone as an extraction solvent. The resulting extract is then concentrated using a Vortex evaporator. Three different solid-phase extraction (SPE) procedures, adjusted to the chemical properties of the different active ingredients to be measured, are applied to the concentrated extract, thus leading to three extract fractions. The first fraction contains such main classes of active ingredients as organohalogenated and 2,6-dinitroaniline compounds while the second one collects the organophosphorus and acylalanines residues; these two fractions are analyzed by capillary gas chromatography coupled to tandem mass spectrometry using negative chemical ionization and electron impact ionization in the positive mode, respectively. The third extract fraction gathers the N-methylcarbamates residues which are analyzed by HPLC with post-column derivatization and fluorescence detection. The different sample preparation stages from extraction to SPE clean-up have been automated through the use of recent analytical technologies. In combination with the analysis by tandem mass spectrometry, this provided a potential for a high sample throughput.     

Synthesis,conformational analysis and in vivo assays of an anti-cancer vaccine that features an unnatural antigen based on an sp2-iminosugar fragment

The Tn antigen (GalNAc-α-1-O-Thr/Ser) is a well-known tumor-associated carbohydrate determinant. The use of glycopeptides that incorporate this structure has become a significant and promising niche of research owing to their potential use as anticancer vaccines. Herein, the conformational preferences of a glycopeptide with an unnatural Tn antigen, characterized by a threonine decorated with an sp²-iminosugar-type α-GalNAc mimic, have been studied both in solution, by combining NMR spectroscopy and molecular dynamics simulations, and in the solid state bound to an anti-mucin-1 (MUC1) antibody, by X-ray crystallography. The Tn surrogate can mimic the main conformer sampled by the natural antigen in solution and exhibits high affinity towards anti-MUC1 antibodies. Encouraged by these data, a cancer vaccine candidate based on this unnatural glycopeptide and conjugated to the carrier protein Keyhole Limpet Hemocyanin (KLH) has been prepared and tested in mice. Significantly, the experiments in vivo have proved that this vaccine elicits higher levels of specific anti-MUC1 IgG antibodies than the analog that bears the natural Tn antigen and that the elicited antibodies recognize human breast cancer cells with high selectivity. Altogether, we compile evidence to confirm that the presentation of the antigen, both in solution and in the bound state, plays a critical role in the efficacy of the designed cancer vaccines. Moreover, the outcomes derived from this vaccine prove that there is room for exploring further adjustments at the carbohydrate level that could contribute to designing more efficient cancer vaccines.

An anti-cancer vaccine based on an unnatural antigen with an sp²-iminosugar fragment.     

Verfahren zur Spurenanalyse aus metallischen Proben

Zusammenfassung Ein neues lösungsspektrographisches Zerstäubungsverfahren wird beschrieben, bei dem die Lösung so zerstäubt wird, daß sie die Graphitelektroden nicht berührt. Mit diesem Verfahren könnten 10^–3 bis 10^–5 % Al, B, Cr, Cu, Mg, Mn, Mo, Ni, Si, Sn, Ti, V und Zr in Eisen und Stahl bestimmt werden.Zur Bestimmung von Verunreinigungen oder Einschlüssen in Stahl wird ein spektrographisches Verfahren mit Preßlingselektroden empfohlen, das nur 0,1–1 mg Rückstand benötigt. Oxide von Al, B, Ca, Co, Cu, Cr, Fe, Mg, Mn, Mo, Nb, Ni, Pb, Si, Sn, Sr, Ti, V, Zn und Zr konnten bis herab zu etwa 10^–7 g erfaßt werden.

---

Methods for the determination of trace elements from metallic samples

The principles of a new spectrographical atomizing-method of solution are described. The solution has to be atomized into a gap without contacting the surface of the graphite electrodes. In this way the exact determination of 10^–3 to 10^–5 % of Al, B, Cr, Cu, Mg, Mn, Mo, Ni, Si, Sn, Ti, V and Zr in iron and steel is possible.The microanalytical determination of impurities or inclusions in steel has been achieved by a spectrographical method with briquette electrodes. The necessary amount of isolation residue is only 0.1–1 mg. The oxides of Al, B, Ca, Co, Cu, Cr, Fe, Mg, Mn, Mo, Nb, Ni, Pb, Si, Sn, Sr, Ti, V, Zn and Zr can be accurately determined by this procedure. The limit of determination is about 10^–7 g.

     

From a monomer to a protein-sized, doughnut-shaped coordination oligomer-the influence of side chains of C3-symmetric ligands in supramolecular chemistry

Herein we describe the importance of side chains in C3-symmetric ligands in supramolecular chemistry. The reaction of the new ligand tris(5-bromo-2-methoxybenzylidene)triaminoguanidinium chloride [H3Me3Br3L]Cl (1) with ZnCl2 results in the formation of the monomeric complex (Et3NH)2[(ZnCl2)3Me3Br3L] (2), in which the ligand remains in a conformation less favourable for the coordination of metal centres. The use of the related tris(5-bromo-2-hydroxybenzylidene)triaminoguanidinium chloride, [H6Br3L]Cl, under similar conditions, results in the formation of two different dimeric compounds (NH4)[{[Zn(NH3)]3Br3L}2{mu-(OH)}3]1/4MeOH (3) and [Zn{Zn2(OH2)3(NH3)Br3L}2] (4), depending on the solvent mixture used. The comparable reaction of the ligand tris(5-bromo-2-hydroxy-3-methoxybenzylidene)triaminoguanidinium chloride [H6(OMe)3Br3L]Cl (5), leads to the formation of a doughnut-shaped, protein-sized coordination oligomer (Et3NH)18[{Zn[Zn2Cl{(OMe)3Br3L}]2}6(mu-Cl)6(OH2)6]x CH3CN (6), which comprises six dimeric [Zn5{(OMe)3Br3L}2] units. Whereas 3 and 4 decompose in DMSO solution, 6 is surprisingly stable in the same solvent.     

Gasanalyse mit Hilfe eines kleinen Massenspektrometers

Zusammenfassung Es wird eine automatisierte Apparatur zur schnellen, massenspektrometrischen Bestimmung von Sauerstoff und Stickstoff in Stahl beschrieben. Die Stahlprobe wird unter Argon im Gleichstrombogen geschmolzen und die extrahierten Gase Kohlenmonoxid und Stickstoff werden massenspektrometrisch bestimmt. Die relative Standardabweichung beträgt ±3–5% für Sauerstoff und ±3–8% für Stickstoff. Die Nachweisgrenzen liegen bei 10 pp10⁶ O₂ und 3 pp10⁶ N₂. Der Zeitbedarf für eine Analyse beträgt 85 s.Herrn H. Siffrin danke ich für die sorgfältige Durchführung der zahlreichen Versuche.     

Optical properties of anthracene single crystals in the excitonic region of the spectrum between 4 and 10.5 eV

The optical constants in the photon energy range between 4 and 10.5 eV for E ?b on (001) and E ?L and E ⊥ _L on the (010) plane are discussed. In particular the influence of macroscopic fields on the optical properties of anisotropic crystals is considered. For _E ? a on the (001) plane reflection spectra have been measured at various angles of incidence. These data and results obtained recently by Hymowitz and Clark for several artificially prepared crystal faces are discussed on the basis of the frequency dependend dielectric functions. New information on the directional dispersion of exciton bands is thus obtained.     

Crossed-beam study of Co+(3F4)+propane: experiment and density functional theory

A pulsed beam of Co+(3F4) crosses a pulsed beam of C3H8 or C3D8 gas under single collision conditions at collision energies of 0.01 eV and 0.21 eV. After a variable time delay t(ext) = 1-8 micros a fast high voltage pulse extracts product ions into a field-free flight tube for mass analysis. Consistent with earlier work, we observe prompt CoC3H6+ +H2 elimination products in 3:1 excess over CoC2H4+ +CH4 products at 0.21 eV on a 2-10 micros time scale. Long-lived CoC3H8+ complexes fragment predominantly back to Co+ +C3H8 reactants and to H2 elimination products on a 6-24 micros time scale. Density functional theory (B3LYP) calculations provide energies, geometries, and harmonic vibrational frequencies at key stationary points for use in a statistical rate model of the reaction. By adjusting two key multicenter transition state (MCTS) energies downward by 4-7 kcal mol(-1), we obtain good agreement with our decay time results and with the cross section versus collision energy of Armentrout and co-workers from 0.1-1.0 eV. B3LYP theory succeeds in finding relative energies of the MCTSs leading to CH4 and H2 in the proper order to explain the different product branching ratio for Co+ (which favors H2 over CH4) compared with its nearest neighbors Fe+ and Ni+ (which favor CH4 over H2).     

Einfaches Verfahren zur Bestimmung des Chloridgehaltes von schwefelsauren galvanischen Kupferb?dern mit Hilfe ionensensitiver Elektroden

Zusammenfassung Die Anwendung einer chloridionensensitiven Elektrode für die direktpotentiometrische Chloridbestimmung in galvanischen BÄdern wird beschrieben und eine genaue Arbeitsvorschrift sowie drei verschiedene Auswerteverfahren angegeben. Die Messungen wurden in einem Bereich von 30–250 mg Cl^– je Liter Badlösung an Modellösungen durchgeführt. Die einzelnen Methoden ergaben eine Standardabweichung von ±2,1 mg bei Verwendung einer Eichkurve, ±2,2 mg beim Standardzusatzverfahren und ±3,6 mg bei der Direktablesung auf einer logarithmisch geteilten Skala eines mV-Meters. Ebenso wurden Messungen an einer Reihe von Badproben durchgeführt.Für wertvolle Anregungen und Diskussionen danken wir Herrn Schwank, Siemens AG, Abt. Informationselektronik.