Inhibitors of tyrosine phosphatases and apoptosis reprogram lineage-marked differentiated muscle to myogenic progenitor cells

Muscle regeneration declines with aging and myopathies, and reprogramming of differentiated muscle cells to their progenitors can serve as a robust source of therapeutic cells. Here, we used the Cre-Lox method to specifically label postmitotic primary multinucleated myotubes and then utilized small molecule inhibitors of tyrosine phosphatases and apoptosis to dedifferentiate these myotubes into proliferating myogenic cells, without gene overexpression. The reprogrammed, fusion competent, muscle precursor cells contributed to muscle regeneration in?vitro and in?vivo and were unequivocally distinguished from reactivated reserve cells because of the lineage marking method. The small molecule inhibitors downregulated cell cycle inhibitors and chromatin remodeling factors known to promote and maintain the cell fate of myotubes, facilitating cell fate reversal. Our findings enhance understanding of cell-fate determination and create novel therapeutic approaches for improved muscle repair.     

Spectroscopic and structural study of the ambazone hydrochloride

Ambazone, a well-known antimicrobial compound, presents also oncostatic properties. The solid form, obtained by using solvent-drop grinding procedure, was characterized by using several physical techniques such as FTIR, X-ray photoelectron spectroscopy, ¹³C NMR and ¹⁵N NMR spectroscopies, thermal analysis, X-ray powder diffraction and mass spectrometry. Based on these data, it was demonstrated that an ambazone–hydrochloride was obtained: new vibrations corresponding to NH₂ ⁺ were identified. DTA–TG–DSC and MS data revealed that a new crystal type has been obtained. X-ray diffraction data allowed the determination of the lattice parameters and the most probable space group P _21/c was established also with only one molecule per asymmetric unit.     

Molecular dynamics simulation of surface segregation in a (110) B2-NiAl thin film

Surface segregation in (110) B2-NiAl film approximately 3 nm thick is investigated by using molecular dynamics simulation with a reliable embedded-atom potential. The simulation is performed for the stoichiometric composition at a temperature of 1500 K, just below the melting temperature of the film model. It is found that the (110) surface is structurally stable but develops adatoms, vacancies and antisites. The coverage of an adatom layer is estimated to be ～0.07 ML (monatomic layers) and it contains on average ～95% of Al atoms. The top (surface) and second (subsurface) layers of the (110) surface is the most enriched in Ni relative to the bulk composition. These layers contain on average ～51% of Ni atoms. The Ni fraction in the third and forth layers of the film is estimated as ～50.5%. The deeper layers have essentially the bulk composition. Vacancies in the film model are found only on the Ni sublattice. The vacancy concentration on the Ni sublattice in the top layer is ～7.5%. The second layer almost does not contain vacancies. The next layers have essentially the constant bulk vacancy composition which can be estimated as ～1.3-1.4%.     

Mixed micellization between natural and synthetic block copolymers: β-casein and Lutrol F-127

Amphiphilic block copolymers and mixtures of amphiphiles find broad applications in numerous technologies, including pharma, food, cosmetic and detergency. Here we report on the interactions between a biological charged diblock copolymer, β-casein, and a synthetic uncharged triblock copolymer, Lutrol F-127 (EO(101)PO(56)EO(101)), on their mixed micellization characteristics and the micelles' structure and morphology. Isothermal titration calorimetry (ITC) experiments indicate that mixed micelles form when Lutrol is added to monomeric as well as to assembled β-casein. The main driving force for the mixed micellization is the hydrophobic interactions. Above β-casein CMC, strong perturbations caused by penetration of the hydrophobic oxypropylene sections of Lutrol into the protein micellar core lead to disintegration of the micelles and reformation of mixed Lutrol/β-casein micelles. The negative enthalpy of micelle formation (ΔH) and cooperativity increase with raising β-casein concentration in solution. ζ-potential measurements show that Lutrol interacts with the protein micelles to form mixed micelles even below its critical micellization temperature (CMT). They further indicate that Lutrol effectively masks the protein charges, probably by forming a coating layer of the ethyleneoxide rich chains. Small-angle X-ray scattering (SAXS) and cryogenic-transmission electron microscopy (cryo-TEM) indicate relatively small changes in the oblate micellar shape, but do show swelling along the small axis of β-casein micelles in the presence of Lutrol, thereby confirming the formation of mixed micelles.     

Click-chemistry approach to isoxazole-containing α-CF3-substituted α-aminocarboxylates and α-aminophosphonates

A convenient strategy for the synthesis of isoxazole-containing α-CF(3)-substituted α-aminocarboxylates and α-aminophosphonates have been developed. The method is based on copper-catalyzed 1,3-dipolar cycloaddition of different aromatic nitrile oxides to functionalized acetylenes.     

Anisotropic solvent model of the lipid bilayer. 2. Energetics of insertion of small molecules, peptides, and proteins in membranes

A new computational approach to calculating binding energies and spatial positions of small molecules, peptides, and proteins in the lipid bilayer has been developed. The method combines an anisotropic solvent representation of the lipid bilayer and universal solvation model, which predicts transfer energies of molecules from water to an arbitrary medium with defined polarity properties. The universal solvation model accounts for hydrophobic, van der Waals, hydrogen-bonding, and electrostatic solute-solvent interactions. The lipid bilayer is represented as a fluid anisotropic environment described by profiles of dielectric constant (ε), solvatochromic dipolarity parameter (π*), and hydrogen bonding acidity and basicity parameters (α and β). The polarity profiles were calculated using published distributions of quasi-molecular segments of lipids determined by neutron and X-ray scattering for DOPC bilayer and spin-labeling data that define concentration of water in the lipid acyl chain region. The model also accounts for the preferential solvation of charges and polar groups by water and includes the effect of the hydrophobic mismatch for transmembrane proteins. The method was tested on calculations of binding energies and preferential positions in membranes for small-molecules, peptides and peripheral membrane proteins that have been experimentally studied. The new theoretical approach was implemented in a new version (2.0) of our PPM program and applied for the large-scale calculations of spatial positions in membranes of more than 1000 peripheral and integral proteins. The results of calculations are deposited in the updated OPM database ( http://opm.phar.umich.edu ).     

Electrochemical sensor for blood deoxyribonucleases: design and application to the diagnosis of autoimmune thyroiditis

We designed an electrochemical sensor based on a carbon nanotube modified electrode (ME) to analyze DNA-cleaving activity. The cleavage of high molecular weight DNA resulted in an increase in the oxidation current from DNA guanine nucleotides due to a change in DNA adsorptive behavior on the surface of the ME. DNA digestion with DNAse I was accompanied by a linear increase in the DNA signal in proportion to the enzyme activity. We then proposed an assay based on the sensor for the direct assessment of the total deoxyribonuclease activity of blood serum as well as the separate detection of DNAse I and DNA abzymes. The assay was applied to analyze deoxyribonucleases in sera from 21 healthy donors and 17 patients with autoimmune thyroiditis. Our results show that the response of the sensor to DNA cleavage by blood deoxyribonucleases is a promising diagnostic criterion for autoimmune thyroiditis. This sensor can be implemented in a disposable screen-printed electrode format for application in clinical laboratories.     

Targeting π‐Conjugated Multiple Donor–Acceptor Motifs Exemplified by Tetrathiafulvalene‐Linked Quinoxalines and Tetrabenz[bc,ef,hi,uv]ovalenes: Synthesis,Spectroscopic, Electrochemical,and Theoretical Characterization

An efficient synthetic approach to a symmetrically functionalized tetrathiafulvalene (TTF) derivative with two diamine moieties, 2‐[5,6‐diamino‐4,7‐bis(4‐pentylphenoxy)‐1,3‐benzodithiol‐2‐ylidene]‐4,7‐bis(4‐pentylphenoxy)‐1,3‐benzodithiole‐5,6‐diamine ( 2 ), is reported. The subsequent Schiff‐base reactions of 2 afford large π‐conjugated multiple donor–acceptor (D–A) arrays, for example, the triad 2‐[4,9‐bis(4‐pentylphenoxy)‐1,3‐dithiolo[4,5‐g]quinoxalin‐2‐ylidene]‐4,9‐bis(4‐pentylphenoxy)‐1,3‐dithiolo[4,5‐g]quinoxaline ( 8 ) and the corresponding tetrabenz[bc,ef,hi,uv]ovalene‐fused pentad 1 , in good yields and high purity. The novel redox‐active nanographene 1 is so far the largest known TTF‐functionalized polycyclic aromatic hydrocarbon (PAH) with a well‐resolved ¹H NMR spectrum. The electrochemically highly amphoteric pentad 1 and triad 8 exhibit various electronically excited charge‐transfer states in different oxidation states, thus leading to intense optical intramolecular charge‐transfer (ICT) absorbances over a wide spectral range. The chemical and electrochemical oxidations of 1 result in an unprecedented TTF^?+ radical cation dimerization, thereby leading to the formation of [ 1 ^?+]₂ at room temperature in solution due to the stabilizing effect, which arises from strong π–π interactions. Moreover, ICT fluorescence is observed with large solvent‐dependent Stokes shifts and quantum efficiencies of 0.05 for 1 and 0.035 for 8 in dichloromethane.     

Flow behaviour of highly concentrated emulsions of supersaturated aqueous solution in oil

A set of highly concentrated water-in-oil emulsions with supersaturated dispersed phase were investigated in this work to verify and/or develop the models that have been presented both in the literature and in this work. The material used to form emulsions consisted of supersaturated oxidiser solution, hydrocarbon oil and PIBSA-based surfactants. The interfacial characteristics for different surfactant types were first examined. Then, the rheology of samples was studied, and different scaling methods and fitting of experimental data were studied. On the basis of flow curve measurements and observed $\tau _\emph{v} \sim \dot {\gamma }^{1/2}$ scaling, a modified version of Windhab model was suggested which showed excellent fitting of experimental results. The linear dependences of ?? _y0/?? versus 1/d ₃₂ for studied emulsions showed non-zero intercept which implies a non-linear dependence (resulting from interdroplet interaction) to fulfil the zero-intercept requirement. It was established that the zero intercept condition was fulfilled in the $\tau _{y0} \sim \sigma /d_{32}^2 $ scaling, although the experimental results for different surfactants were not superimposed.     

Zeta potential of anoxygenic phototrophic bacteria and Ca adsorption at the cell surface: possible implications for cell protection from CaCO3 precipitation in alkaline solutions

Electrophoretic mobility measurements and surface adsorption of Ca on living, inactivated, and heat-killed haloalkaliphilic Rhodovulum steppense, A-20s, and halophilic Rhodovulum sp., S-17-65 anoxygenic phototrophic bacteria (APB) cell surfaces were performed to determine the degree to which these bacteria metabolically control their surface potential equilibria. Zeta potential of both species was measured as a function of pH and ionic strength, calcium and bicarbonate concentrations. For both live APB in 0.1M NaCl, the zeta potential is close to zero at pH from 2.5 to 3 and decreases to -30 to -40 mV at pH of 5-8. In alkaline solutions, there is an unusual increase of zeta potential with a maximum value of -10 to -20 mV at a pH of 9-10.5. This increase of zeta potential in alkaline solutions is reduced by the presence of NaHCO(3) (up to 10 mM) and only slightly affected by the addition of equivalent amount of Ca. At the same time, for inactivated (exposure to NaN(3), a metabolic inhibitor) and heat-killed bacteria cells, the zeta potential was found to be stable (-30 to -60 mV, depending upon the ionic strength) between pH 5 and 11 without any increase in alkaline solutions. Adsorption of Ca ions on A-20s cells surface was more significant than that on S-17-65 cells and started at more acidic pHs, consistent with zeta potential measurements in the presence of 0.001-0.01 mol/L CaCl(2). Overall, these results indicate that APB can metabolically control their surface potential to electrostatically attract nutrients at alkaline pH, while rejecting/avoiding Ca ions to prevent CaCO(3) precipitation in the vicinity of cell surface and thus, cell incrustation.