Excited-state absorption properties of platinum(II) terpyridyl acetylides

A comprehensive photophysical study is presented which compares the ground- and excited-state properties of four platinum(II) terpyridyl acetylide compounds of the general formula [Pt(tBu3tpy)(CCR)]+, where tBu3tpy is 4,4',4' '-tri-tert-butyl-2,2':6',2' '-terpyridine and R is an alkyl or aryl group. [Ru(tBu3tpy)3]2+ and the pivotal synthetic precursor [Pt(tBu3tpy)Cl]+ were also investigated in the current work. The latter two complexes possess short excited-state lifetimes and were investigated using ultrafast spectrometry while the other four compounds were evaluated using conventional nanosecond transient-absorption spectroscopy. The original intention of this study was to comprehend the nature of the impressive excited-state absorptions that emanate from this class of transition-metal chromophores. Transient-absorbance-difference spectra across the series contain the same salient features, which are modulated only slightly in wavelength and markedly in intensity as a function of the appended acetylide ligand. More intense absorption transients are observed in the arylacetylide structures relative to those bearing an alkylacetylide, consistent with transitions coupled to the pi system of the ancillary ligand. Reductive spectroelectrochemical measurements successfully generated the electronic spectrum of the tBu3tpy radical anion in all six complexes at room temperature. These measurements confirm that electronic absorptions associated with the tBu3tpy radical anion simply do not account for the intense optical transitions observed in the excited state of the Pt(II) chromophores. Transient-trapping experiments using the spectroscopically silent reductive quencher DABCO clearly demonstrate the loss of most transient-absorption features in the acetylide complexes throughout the UV, visible, and near-IR regions following bimolecular excited-state electron transfer, suggesting that these features are strongly tied to the photogenerated hole which is delocalized across the Pt center and the ancillary acetylide ligand.     

Direct electrochemistry of recombinant tobacco peroxidase on gold

Direct electron transfer (DET) reactions of recombinant tobacco peroxidase (rTOP), namely direct electroreduction of Compound I/Compound II and heme Fe^3+/2+ conversion, were studied on gold electrodes. rTOP of wild type, non-glycosylated, was produced using an Escherichia coli expression system. At pH 5.0, the redox potential for direct electrochemical transformation of the Fe^3+/2+ of the peroxidase heme was −143 mV vs. AgAgCl, and 0.26 ± 0.07 pmol of the adsorbed rTOP were in DET contact with the gold electrode. The total amount of the adsorbed rTOP estimated from QCM data was 53 ± 5 pmol/cm² or 1.67 pmol when referred to the surface area of the electrodes used for electrochemical measurements. Of 1.67 pmol of adsorbed rTOP, only 0.76 pmol were catalytically active. DET between Au and the enzyme was also studied in the reaction of the bioelectrocatalytic reduction of H₂O₂ by cyclic voltammetry and amperometric detection of H₂O₂ at +50 mV with rTOP-modified Au electrodes placed in a wall-jet flow-through electrochemical cell. Maximal bioelectrocatalytic current response of the rTOP-modified gold electrodes to H₂O₂ was observed at pH 5.0 and stemmed from its bioelectrocatalytic reduction based on DET between Au and the active site of rTOP. Kinetic analysis of the DET reactions gave 52% of the adsorbed rTOP molecules active in DET reactions (0.4 pmol of adsorbed catalytically active rTOP, correspondingly), which correlated well with the non-catalytic-voltammetry data. DET was characterised by a heterogeneous ET rate constant of 13.2 s⁻¹, if one takes into account the QCM data, and 19.6 s⁻¹, if the amount of rTOP estimated from the data on DET transformation of Fe^3+/2+ couple of rTOP is considered. The sensitivity for H₂O₂ obtained for the rTOP-modified Au electrodes was 0.7 ± 0.1 A M⁻¹ cm⁻². These are the first ever-reported data on DET reactions of anionic plant peroxidases on bare gold electrodes.     

Role of the Polymer Matrix on the Photoluminescence of Embedded CdSe Quantum Dots

The photoluminescence (PL) of CdSe quantum dots (QDs) that form stable nanocomposites with polymer liquid crystals (LCs) as smectic C hydrogen‐bonded homopolymers from a family of poly[4‐(n‐acryloyloxyalkyloxy)benzoic acids] is reported. The matrix that results from the combination of these units with methoxyphenyl benzoate and cholesterol‐containing units has a cholesteric structure. The exciton PL band of QDs in the smectic matrix is redshifted with respect to QDs in solution, whereas a blueshift is observed with the cholesteric matrix. The PL lifetimes and quantum yield in cholesteric nanocomposites are higher than those in smectic ones. This is interpreted in terms of a higher order of the smectic matrix in comparison to the cholesteric one. CdSe QDs in the ordered smectic matrix demonstrate a splitting of the exciton PL band and an enhancement of the photoinduced differential transmission. These results reveal the effects of the structure of polymer LC matrices on the optical properties of embedded QDs, which offer new possibilities for photonic applications of QD–LC polymer nanocomposites.     

Ion-imprinted polymethacrylic microbeads as new sorbent for preconcentration and speciation of mercury

Metal ion-imprinted polymer particles have been prepared by copolymerization of methacrylic acid as monomer, trimethylolpropane trimethacrylate as cross-linking agent and 2,2′-azobisisobutyronitrile as initiator, in the presence of Hg(II)-1-(2-thiazolylazo)-2-naphthol complex. The separation and preconcentration characteristics of the Hg-ion-imprinted microbeads for inorganic mercury have been investigated by batch procedure. The optimal pH value for the quantitative sorption is 7. The adsorbed inorganic mercury is easily eluted by 2 mL 4 M HNO₃. The adsorption capacity of the newly synthesized Hg ion-imprinted microbeads is 32.0 μmol g⁻¹ for dry copolymer. The selectivity of the copolymer toward inorganic mercury (Hg(II)) ion is confirmed through the comparison of the competitive adsorptions of Cd(II), Co(II), Cu(II), Ni(II), Pb(II), Zn(II)) and high values of the selectivity and distribution coefficients have been calculated. Experiments performed for selective determination of inorganic mercury in mineral and sea waters showed that the interfering matrix does not influence the extraction efficiency of Hg ion-imprinted microbeads. The detection limit for inorganic mercury is 0.006 μg L⁻¹ (3σ), determined by cold vapor atomic adsorption spectrometry. The relative standard deviation varied in the range 5-9 % at 0.02-1 μg L⁻¹ Hg levels. The new Hg-ion-imprinted microbeads have been tested and applied for the speciation of Hg in river and mineral waters: inorganic mercury has been determined selectively in nondigested sample, while total mercury e.g. sum of inorganic and methylmercury, has been determined in digested sample.     

Organometallic complexes as hole-transporting materials in organic light-emitting diodes

The use of metal complexes fac-tris(1-phenylpyrazolato-N,C(2)('))cobalt(III) [fac-Co(ppz)(3)], fac-tris(2-phenylpyridinato-N,C(2)(') cobalt(III) [fac-Co(ppy)(3)], and [tris[2-((pyrrole-2-ylmethylidene)amino)ethyl]amine]gallium(III) [Ga(pma)] as materials for hole-transporting layers (HTL) in organic light-emitting diodes (OLEDs) is reported. Co(ppz)(3) and Co(ppy)(3) were prepared by following literature procedures and isolated as mixtures of facial (fac) and meridional (mer) isomers. The more stable fac isomers were separated from the unstable mer forms via column chromatography and thermal gradient sublimation. Crystals of fac-Co(ppz)(3) are monoclinic, space group P2(1)/c, with a = 13.6121(12) A, b = 15.5600(12) A, c = 22.9603(17) A, beta = 100.5 degrees, V = 4781.3(7) A(3), and Z = 8. [Tris[2-((pyrrol-2-ylmethylidene)amino)ethyl]amine]gallium [Ga(pma)] was prepared by the reaction of gallium(III) nitrate with the pmaH(3) ligand precursor in methanol. Ga(pma) crystallizes in the cubic space group I3d with cell parameters a = 20.2377(4) A, b = 20.2377(4) A, c = 20.2377(4) A, beta = 90.0 degrees, V = 8288.6(3) A(3), and Z = 16. These cobalt and gallium complexes are pale colored to colorless solids, with optical energy gaps ranging 2.6-3.36 eV. A two-layer HTL/ETL (ETL = electron-transporting layer) device structure using fac-Co(ppz)(3) and fac-Co(ppy)(3) as the HTL does not give efficient electroluminescence. However, the introduction of a thin layer of a hole-transporting material (N,N'-bis(1-naphthyl)-N,N'-diphenylbenzidine, NPD) as an energy "stair-step" and electron/exciton-blocker dramatically improves the device performance. Both fac-Co(ppz)(3) and fac-Co(ppy)(3) devices give external quantum efficiencies higher than 1.0%, with brightness 5000 and 7000 Cd/m(2) at 10 V, respectively. Ga(pma) also functions as an efficient interface layer, giving device performances very similar to those of analogous devices using NPD as the interface layer. Stability tests have been carried out for Co(ppz)(3)/NPD/Alq(3) and Co(ppy)(3)/NPD/Alq(3) devices. While fac-Co(ppy)(3) gave stable OLEDs, the fac-Co(ppz)(3)-based devices had very short lifetimes. On the basis of the experimental results of chemical oxidation of fac-Co(ppz)(3), the major cause for the fast decay of the fac-Co(ppz)(3) device is proposed to be the decomposition of fac-Co(ppz)(3)(+) in the HTL layer during the device operation.     

A Comparative Study of Biocathodes Based on Multiwall Carbon Nanotube Buckypapers Modified with Three Different Multicopper Oxidases

14 Single‐ and multi‐walled carbon nanotubes from different sources were characterized in detail, and the characteristics obtained were carefully analyzed. The carbon material with the highest capacitance, and also other superior properties (“Taunit‐M” from “NanoTechCenter”, Russia), was chosen for further modification and fabrication of buckypaper based electrodes. These electrodes were biomodified with plant and fungal laccases, as well as fungal bilirubin oxidase. The designed biocathodes were investigated in simple buffers and also in a complex physiological fluid (human serum). Biocathodes based on immobilized fungal laccase were bioelectrocatalytically inactive in chloride containing media at neutral pH. In spite of the quite high current densities realized using biodevices based on plant laccase and fungal bilirubin oxidase, the limited thermal stability of the enzymes renders the biocathodes inadequate for practical applications in implanted situations.     

Redox‐Induced Spin‐State Switching and Mixed Valency in Quinonoid‐Bridged Dicobalt Complexes

The complexes [{(tmpa)Co^II}₂(μ‐L¹)^2?]²⁺ ( 1²⁺ ) and [{(tmpa)Co^II}₂(μ‐L²)^2?]²⁺ ( 2²⁺ ), with tmpa=tris(2‐pyridylmethyl)amine, H₂L¹=2,5‐di‐[2‐(methoxy)‐anilino]‐1,4‐benzoquinone, and H₂L²=2,5‐di‐[2‐(trifluoromethyl)‐anilino]‐1,4‐benzoquinone, were synthesized and characterized. Structural analysis of 2²⁺ revealed a distorted octahedral coordination around the cobalt centers, and cobalt–ligand bond lengths that match with high‐spin Co^II centers. Superconducting quantum interference device (SQUID) magnetometric studies on 1²⁺ and 2²⁺ are consistent with the presence of two weakly exchange‐coupled high‐spin cobalt(II) ions, for which the nature of the coupling appears to depend on the substituents on the bridging ligand, being antiferromagnetic for 1²⁺ and ferromagnetic for 2²⁺ . Both complexes exhibit several one‐electron redox steps, and these were investigated with cyclic voltammetry and UV/Vis/near‐IR spectroelectrochemistry. For 1²⁺ , it was possible to chemically isolate the pure forms of both the one‐electron oxidized mixed‐valent 1³⁺ and the two‐electron oxidized isovalent 1⁴⁺ forms, and characterize them structurally as well as magnetically. This series thus provided an opportunity to investigate the effect of reversible electron transfers on the total spin‐state of the molecule. In contrast to 2²⁺ , for 1⁴⁺ the metal–ligand distances and the distances within the quinonoid ligand point to the existence of two low‐spin Co^III centers, thus showing the innocence of the quintessential non‐innocent ligands L. Magnetic data corroborate these observations by showing the decrease of the magnetic moment by roughly half (neglecting spin exchange effects) on oxidizing the molecules with one electron, and the disappearance of a paramagnetic response upon two‐electron oxidation, which confirms the change in spin state associated with the electron‐transfer steps.     

Synthesis and Cytotoxic Activity of 1‐{3‐[1‐(5‐Organylsilylfuran‐2‐yl)silinan‐1‐yl]propyl}amines and Some Trimethylgermyl Analogues

New highly cytotoxic 1‐{3‐[1‐(5‐organylsilyl‐furan‐2‐yl)silinan‐1‐yl]propyl}amines and some trimethylgermyl analogues (IC₅₀ 1–7 μg mL^?1) have been synthesized by a hydrosilylation reaction of aliphatic and heterocyclic N‐allylamines in the presence of Speier’s catalyst. The effects of the silacycle, the element‐organic substituent in position 5 of the furan ring, and the structure of the amine on the cytotoxicity of the new compounds have been studied.     

Three polymorphs of 3‐(3‐phenyl‐1H‐1,2,4‐triazol‐5‐yl)‐2H‐1‐benzopyran‐2‐one formed from different solvents

The polymorphic study of 3‐(3‐phenyl‐1H‐1,2,4‐triazol‐5‐yl)‐2H‐1‐benzopyran‐2‐one, C₁₇H₁₁N₃O₂, was performed due to its potential biological activity and revealed three polymorphic modifications in the triclinic space group P, the monoclinic space group P2₁ and the orthorhombic space group Pbca. These polymorphs have a one‐column layered type of crystal organization. The strongest interactions between the molecules of the studied structures is stacking between π‐systems, while N—H…N and C—H…O hydrogen bonds link stacked columns forming layers as a secondary basic structural motif. C—H…π hydrogen bonds were observed between neighbouring layers and their role is the least significant in the formation of the crystal structure. Packing differences between the polymorphic modifications are minor and can be identified only using an analysis based on a comparison of the pairwise interaction energies.     

Ferromagnetically Coupled S=1 Chains in Crystals of Verdazyl-Nitronyl Nitroxide Diradicals

Thermally stable organic diradicals with a triplet ground state along with large singlet-triplet energy gap have significant potential for advanced technological applications. A series of phenylene-bridged diradicals with oxoverdazyl and nitronyl nitroxide units were synthesized via a palladium-catalyzed cross-coupling reaction of iodoverdazyls with a nitronyl nitroxide-2-ide gold(I) complex with high yields. The diradicals exhibit high stability and do not decompose in an inert atmosphere up to 180 °C. For the diradicals, both substantial AF (ΔE_ST≈−64 cm⁻¹) and FM (ΔE_ST≥25 and 100 cm⁻¹) intramolecular exchange interactions were observed. The sign of the exchange interaction is determined both by the bridging moiety (para- or meta-phenylene) and by the type of oxoverdazyl block (C-linked or N-linked). Upon crystallization, diradicals with the triplet ground state form unique one-dimensional exchange-coupled chains with strong intra- and weak inter-diradical ferromagnetic coupling.