Boron-Containing Lipids and Liposomes: New Conjugates of Cholesterol with Polyhedral Boron Hydrides

A series of boron-containing lipids were prepared by reactions of cyclic oxonium derivatives of polyhedron boranes and metallacarboranes (closo-dodecaborate anion, cobalt and iron bis(dicarbollides)) with amine and carboxylic acids which are derived from cholesterol. Stable liposomal formulations, on the basis of synthesized boron-containing lipids, hydrogenated soybean l -α-phosphatidylcholine and (HSPC) 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000] (DSPE-PEG) as excipients, were prepared and then characterized by dynamic light scattering (DLS) that revealed the formation of particles to be smaller than 200 nm in diameter. The resulting liposomal formulations showed moderate to excellent loading and entrapment efficiency, thus justifying the design of the compounds to fit in the lipid bilayer and ensuring ease of in vivo use for future application. The liposomal formulations based on cobalt and iron bis(dicarbollide)-based lipids were found to be nontoxic against both human breast normal epithelial cells MCF-10A and human breast cancer cells MCF-7.     

The features of iodine loss at high temperatures

Journal of Thermal Analysis and Calorimetry - A series of crystalline thiazoloquinolinium iodides has been studied using a combination of thermal analysis, mass and Raman spectroscopy techniques....     

Rheological Study of Some Epiclon‐Based Polyimides

The rheological properties of new partially aliphatic polyimides in N,N‐dimethylformamide were investigated at different concentrations and temperatures comparatively to their corresponding poly(amic acid)s. The rheological functions,i.e., dynamic viscosity, shear rate, elastic shear modulus, and viscous shear modulus, and the parameters obtained from rheological properties such as apparent energy of activation and flow activation entropy reflect the influence of the diamine chemical structures used in the synthesis process.     

Surprisingly slow reaction of dimethylsilylene with dimethylgermane: time-resolved kinetic studies and related quantum chemical calculations

Time-resolved studies of silylene, SiH2, and dimethylsilylene, SiMe2, generated by the 193 nm laser flash photolysis of appropriate precursor molecules have been carried out to obtain rate constants for their bimolecular reactions with dimethylgermane, Me2GeH2, in the gas phase. SiMe2 + Me2GeH2 was studied at five temperatures in the range 299-555 K. Problems of substrate UV absorption at 193 nm at temperatures above 400 K meant that only three temperatures could be used reliably for rate constant measurement. These rate constants gave the Arrhenius parameters log(A/cm3 molecule(-1) s(-1)) = -13.25 +/- 0.16 and E(a) = -(5.01 +/- 1.01) kJ mol(-1). Only room temperature studies of SiH2 were carried out. These gave values of (4.05 +/- 0.06) x 10(-10) cm3 molecule(-1) s(-1) (SiH2 + Me2GeH2 at 295 K) and also (4.41 +/- 0.07) x 10(-10) cm3 molecule(-1) s(-1) (SiH2 + MeGeH3 at 296 K). Rate constant comparisons show the surprising result that SiMe2 reacts 12.5 times slower with Me2GeH2 than with Me2SiH2. Quantum chemical calculations (G2(MP2,SVP)//B3LYP level) of the model Si-H and Ge-H insertion processes of SiMe2 with SiH4/MeSiH3 and GeH4/MeGeH3 support these findings and show that the lower reactivity of SiMe2 with Ge-H bonds is caused by a higher secondary barrier for rearrangement of the initially formed complexes. Full details of the structures of intermediate complexes and the discussion of their stabilities are given in the paper. Other, related, comparisons of silylene reactivity are also presented.     

Synthesis,Structure and Molecular Docking of New 4,5-Dihydrothiazole Derivatives Based on 3,5-Dimethylpyrazole and Cytisine and Salsoline Alkaloids

The interaction results of 1,2-dibromo-3-isothiocyanatopropane with some pyrazoles as well as cytisine and salsoline alkaloids were presented in this paper. It was shown that the reaction resulted in one one-step and rather mild method for the preparation of the corresponding 1,3-thiazoline bromomethyl derivatives. The yield of this reaction was affected by the presence of a base and an order in which reagents were added. Molecular docking of the synthesized 1,3-thiazoline derivatives for putative antibacterial activity was carried out using the penicillin-binding target protein (PBP4) of the bacteria E. coli “Homo sapiens” and S. aureus “Homo sapiens” as an example. Molecular docking demonstrated that the compounds had insignificant binding energies at the level of selected reference drugs (Cephalotin and Chloramphenicol). The presence of natural alkaloids in the structure of thiazoline derivatives somewhat increased the affinity of these substrates for target proteins selected.     

Unexpectedly low affinity of aromatic disulfides for π-stacking interactions of the arene-polyfluoroarene type

1,2,3,4,5-Pentafluorodiphenyl disulfide (1) was synthesized from C₆F₅SCl and C₆H₅SSiMe₃ in quantitative yield. The homo-crystals of disulfide 1 and co-crystals of 1,1′,2,2′,3,3′,4,4′,5,5′-decafluorodiphenyl disulfide (2) with naphthalene (stoichiometry 1:2, complex 4) and diphenyl disulfide (3) with octafluoronaphthalene (stoichiometry 2:1, complex 5) were prepared followed by XRD characterization. In the crystal lattice of 1, face-to-face and face-to-edge Ph_H/Ph_F orientations of neighboring rings were observed together with face-to-edge Ph_F/Ph_F orientations. For the face-to-face Ph_H/Ph_F orientation, the large offset of Ph_H and Ph_F groups excludes their π-stacking interaction which is very non-typical of the field. The crystal lattice of 4 reveals standard π-stacking interactions of the arene-polyfluoroarene type. While in the lattice of 4 each Ph_F ring interacts alternating with naphthalenes, in 5 two disulfides 3 are bridged by one octafluoronaphthalene with only one of the Ph_H rings of each disulfide interacting with the polyfluoroarene π-system. The large offset of neighboring molecules excludes however their π-stacking interactions in complex 5. An attempt to prepare 2/3 co-crystals failed.     

Microwave-assisted three-component synthesis of 7-aryl-2-alkylthio-4,7-dihydro-1,2,4-triazolo[1,5-a]-pyrimidine-6-carboxamides and their selective reduction

Multicomponent reactions (MCRs) and microwave-assisted organic synthesis (MAOS) have been used as key methods for the synthesis of fused dihydropyrimidine derivatives. The three-component condensation of 3-amino-5-alkylthio-1,2,4-triazoles with aromatic aldehydes and acetoacetamides under microwave irradiation was developed as a rapid and efficient solution-phase method for the high-yielding preparation of 7-aryl-2-alkylthio-4,7-dihydro-1,2,4-triazolo[1,5-a]pyrimidine-6-carboxamide libraries. In addition, the selective reduction of the formed dihydrotriazolopyrimidines to trans-trans-2-alkylthio-7-aryl-4,5,6,7-tetrahydro-1,2,4-triazolo[1,5-a]pyrimidine-6-carboxamides was established. The described synthetic protocols provide rapid access to novel and diversely substituted dihydroazolopyrimidine libraries.     

Excited-state absorption properties of platinum(II) terpyridyl acetylides

A comprehensive photophysical study is presented which compares the ground- and excited-state properties of four platinum(II) terpyridyl acetylide compounds of the general formula [Pt(tBu3tpy)(CCR)]+, where tBu3tpy is 4,4',4' '-tri-tert-butyl-2,2':6',2' '-terpyridine and R is an alkyl or aryl group. [Ru(tBu3tpy)3]2+ and the pivotal synthetic precursor [Pt(tBu3tpy)Cl]+ were also investigated in the current work. The latter two complexes possess short excited-state lifetimes and were investigated using ultrafast spectrometry while the other four compounds were evaluated using conventional nanosecond transient-absorption spectroscopy. The original intention of this study was to comprehend the nature of the impressive excited-state absorptions that emanate from this class of transition-metal chromophores. Transient-absorbance-difference spectra across the series contain the same salient features, which are modulated only slightly in wavelength and markedly in intensity as a function of the appended acetylide ligand. More intense absorption transients are observed in the arylacetylide structures relative to those bearing an alkylacetylide, consistent with transitions coupled to the pi system of the ancillary ligand. Reductive spectroelectrochemical measurements successfully generated the electronic spectrum of the tBu3tpy radical anion in all six complexes at room temperature. These measurements confirm that electronic absorptions associated with the tBu3tpy radical anion simply do not account for the intense optical transitions observed in the excited state of the Pt(II) chromophores. Transient-trapping experiments using the spectroscopically silent reductive quencher DABCO clearly demonstrate the loss of most transient-absorption features in the acetylide complexes throughout the UV, visible, and near-IR regions following bimolecular excited-state electron transfer, suggesting that these features are strongly tied to the photogenerated hole which is delocalized across the Pt center and the ancillary acetylide ligand.     

Organometallic complexes as hole-transporting materials in organic light-emitting diodes

The use of metal complexes fac-tris(1-phenylpyrazolato-N,C(2)('))cobalt(III) [fac-Co(ppz)(3)], fac-tris(2-phenylpyridinato-N,C(2)(') cobalt(III) [fac-Co(ppy)(3)], and [tris[2-((pyrrole-2-ylmethylidene)amino)ethyl]amine]gallium(III) [Ga(pma)] as materials for hole-transporting layers (HTL) in organic light-emitting diodes (OLEDs) is reported. Co(ppz)(3) and Co(ppy)(3) were prepared by following literature procedures and isolated as mixtures of facial (fac) and meridional (mer) isomers. The more stable fac isomers were separated from the unstable mer forms via column chromatography and thermal gradient sublimation. Crystals of fac-Co(ppz)(3) are monoclinic, space group P2(1)/c, with a = 13.6121(12) A, b = 15.5600(12) A, c = 22.9603(17) A, beta = 100.5 degrees, V = 4781.3(7) A(3), and Z = 8. [Tris[2-((pyrrol-2-ylmethylidene)amino)ethyl]amine]gallium [Ga(pma)] was prepared by the reaction of gallium(III) nitrate with the pmaH(3) ligand precursor in methanol. Ga(pma) crystallizes in the cubic space group I3d with cell parameters a = 20.2377(4) A, b = 20.2377(4) A, c = 20.2377(4) A, beta = 90.0 degrees, V = 8288.6(3) A(3), and Z = 16. These cobalt and gallium complexes are pale colored to colorless solids, with optical energy gaps ranging 2.6-3.36 eV. A two-layer HTL/ETL (ETL = electron-transporting layer) device structure using fac-Co(ppz)(3) and fac-Co(ppy)(3) as the HTL does not give efficient electroluminescence. However, the introduction of a thin layer of a hole-transporting material (N,N'-bis(1-naphthyl)-N,N'-diphenylbenzidine, NPD) as an energy "stair-step" and electron/exciton-blocker dramatically improves the device performance. Both fac-Co(ppz)(3) and fac-Co(ppy)(3) devices give external quantum efficiencies higher than 1.0%, with brightness 5000 and 7000 Cd/m(2) at 10 V, respectively. Ga(pma) also functions as an efficient interface layer, giving device performances very similar to those of analogous devices using NPD as the interface layer. Stability tests have been carried out for Co(ppz)(3)/NPD/Alq(3) and Co(ppy)(3)/NPD/Alq(3) devices. While fac-Co(ppy)(3) gave stable OLEDs, the fac-Co(ppz)(3)-based devices had very short lifetimes. On the basis of the experimental results of chemical oxidation of fac-Co(ppz)(3), the major cause for the fast decay of the fac-Co(ppz)(3) device is proposed to be the decomposition of fac-Co(ppz)(3)(+) in the HTL layer during the device operation.