Unexpectedly low affinity of aromatic disulfides for π-stacking interactions of the arene-polyfluoroarene type

1,2,3,4,5-Pentafluorodiphenyl disulfide (1) was synthesized from C₆F₅SCl and C₆H₅SSiMe₃ in quantitative yield. The homo-crystals of disulfide 1 and co-crystals of 1,1′,2,2′,3,3′,4,4′,5,5′-decafluorodiphenyl disulfide (2) with naphthalene (stoichiometry 1:2, complex 4) and diphenyl disulfide (3) with octafluoronaphthalene (stoichiometry 2:1, complex 5) were prepared followed by XRD characterization. In the crystal lattice of 1, face-to-face and face-to-edge Ph_H/Ph_F orientations of neighboring rings were observed together with face-to-edge Ph_F/Ph_F orientations. For the face-to-face Ph_H/Ph_F orientation, the large offset of Ph_H and Ph_F groups excludes their π-stacking interaction which is very non-typical of the field. The crystal lattice of 4 reveals standard π-stacking interactions of the arene-polyfluoroarene type. While in the lattice of 4 each Ph_F ring interacts alternating with naphthalenes, in 5 two disulfides 3 are bridged by one octafluoronaphthalene with only one of the Ph_H rings of each disulfide interacting with the polyfluoroarene π-system. The large offset of neighboring molecules excludes however their π-stacking interactions in complex 5. An attempt to prepare 2/3 co-crystals failed.     

Microwave-assisted three-component synthesis of 7-aryl-2-alkylthio-4,7-dihydro-1,2,4-triazolo[1,5-a]-pyrimidine-6-carboxamides and their selective reduction

Multicomponent reactions (MCRs) and microwave-assisted organic synthesis (MAOS) have been used as key methods for the synthesis of fused dihydropyrimidine derivatives. The three-component condensation of 3-amino-5-alkylthio-1,2,4-triazoles with aromatic aldehydes and acetoacetamides under microwave irradiation was developed as a rapid and efficient solution-phase method for the high-yielding preparation of 7-aryl-2-alkylthio-4,7-dihydro-1,2,4-triazolo[1,5-a]pyrimidine-6-carboxamide libraries. In addition, the selective reduction of the formed dihydrotriazolopyrimidines to trans-trans-2-alkylthio-7-aryl-4,5,6,7-tetrahydro-1,2,4-triazolo[1,5-a]pyrimidine-6-carboxamides was established. The described synthetic protocols provide rapid access to novel and diversely substituted dihydroazolopyrimidine libraries.     

Excited-state absorption properties of platinum(II) terpyridyl acetylides

A comprehensive photophysical study is presented which compares the ground- and excited-state properties of four platinum(II) terpyridyl acetylide compounds of the general formula [Pt(tBu3tpy)(CCR)]+, where tBu3tpy is 4,4',4' '-tri-tert-butyl-2,2':6',2' '-terpyridine and R is an alkyl or aryl group. [Ru(tBu3tpy)3]2+ and the pivotal synthetic precursor [Pt(tBu3tpy)Cl]+ were also investigated in the current work. The latter two complexes possess short excited-state lifetimes and were investigated using ultrafast spectrometry while the other four compounds were evaluated using conventional nanosecond transient-absorption spectroscopy. The original intention of this study was to comprehend the nature of the impressive excited-state absorptions that emanate from this class of transition-metal chromophores. Transient-absorbance-difference spectra across the series contain the same salient features, which are modulated only slightly in wavelength and markedly in intensity as a function of the appended acetylide ligand. More intense absorption transients are observed in the arylacetylide structures relative to those bearing an alkylacetylide, consistent with transitions coupled to the pi system of the ancillary ligand. Reductive spectroelectrochemical measurements successfully generated the electronic spectrum of the tBu3tpy radical anion in all six complexes at room temperature. These measurements confirm that electronic absorptions associated with the tBu3tpy radical anion simply do not account for the intense optical transitions observed in the excited state of the Pt(II) chromophores. Transient-trapping experiments using the spectroscopically silent reductive quencher DABCO clearly demonstrate the loss of most transient-absorption features in the acetylide complexes throughout the UV, visible, and near-IR regions following bimolecular excited-state electron transfer, suggesting that these features are strongly tied to the photogenerated hole which is delocalized across the Pt center and the ancillary acetylide ligand.     

Organometallic complexes as hole-transporting materials in organic light-emitting diodes

The use of metal complexes fac-tris(1-phenylpyrazolato-N,C(2)('))cobalt(III) [fac-Co(ppz)(3)], fac-tris(2-phenylpyridinato-N,C(2)(') cobalt(III) [fac-Co(ppy)(3)], and [tris[2-((pyrrole-2-ylmethylidene)amino)ethyl]amine]gallium(III) [Ga(pma)] as materials for hole-transporting layers (HTL) in organic light-emitting diodes (OLEDs) is reported. Co(ppz)(3) and Co(ppy)(3) were prepared by following literature procedures and isolated as mixtures of facial (fac) and meridional (mer) isomers. The more stable fac isomers were separated from the unstable mer forms via column chromatography and thermal gradient sublimation. Crystals of fac-Co(ppz)(3) are monoclinic, space group P2(1)/c, with a = 13.6121(12) A, b = 15.5600(12) A, c = 22.9603(17) A, beta = 100.5 degrees, V = 4781.3(7) A(3), and Z = 8. [Tris[2-((pyrrol-2-ylmethylidene)amino)ethyl]amine]gallium [Ga(pma)] was prepared by the reaction of gallium(III) nitrate with the pmaH(3) ligand precursor in methanol. Ga(pma) crystallizes in the cubic space group I3d with cell parameters a = 20.2377(4) A, b = 20.2377(4) A, c = 20.2377(4) A, beta = 90.0 degrees, V = 8288.6(3) A(3), and Z = 16. These cobalt and gallium complexes are pale colored to colorless solids, with optical energy gaps ranging 2.6-3.36 eV. A two-layer HTL/ETL (ETL = electron-transporting layer) device structure using fac-Co(ppz)(3) and fac-Co(ppy)(3) as the HTL does not give efficient electroluminescence. However, the introduction of a thin layer of a hole-transporting material (N,N'-bis(1-naphthyl)-N,N'-diphenylbenzidine, NPD) as an energy "stair-step" and electron/exciton-blocker dramatically improves the device performance. Both fac-Co(ppz)(3) and fac-Co(ppy)(3) devices give external quantum efficiencies higher than 1.0%, with brightness 5000 and 7000 Cd/m(2) at 10 V, respectively. Ga(pma) also functions as an efficient interface layer, giving device performances very similar to those of analogous devices using NPD as the interface layer. Stability tests have been carried out for Co(ppz)(3)/NPD/Alq(3) and Co(ppy)(3)/NPD/Alq(3) devices. While fac-Co(ppy)(3) gave stable OLEDs, the fac-Co(ppz)(3)-based devices had very short lifetimes. On the basis of the experimental results of chemical oxidation of fac-Co(ppz)(3), the major cause for the fast decay of the fac-Co(ppz)(3) device is proposed to be the decomposition of fac-Co(ppz)(3)(+) in the HTL layer during the device operation.     

Calculated and experimental geometries and infrared spectra of metal tris-acetylacetonates: vibrational spectroscopy as a probe of molecular structure for ionic complexes. Part II

Following on from our previous work on Sc, Fe, Cr, and Al (Part I; see J. Phys. Chem. A, 105 (2001) 238), the geometries and infrared spectra of the trivalent metal tris-acetylacetonate complexes (M[O2C5H7]3; M = Ti, V, Mn, Co) have been studied both experimentally and theoretically using nonlocal hybrid density functional theory with a split-valence plus polarization basis for the ligand and valence triple-zeta for the metal. Unlike the D3 complexes studied in Part I, those of Ti, V and Mn are candidates for Jahn-Teller distortion due to fractional d-shell occupancy. Using scale factors transferred from Part I, our calculated frequencies are in very good agreement with experimentally observed fundamentals. Our investigation shows that the V and Mn complexes distort to C2 ground states, but D3 Ti tris-acetylacetonate is stable. Further investigation of the weak band observed around 800 cm(-1) in the Fe complex (and present in almost all studied first-row transition metal tris-acetylacetonates), which we were unable to assign theoretically in Part I, supports the argument that this band is not a fundamental but is due to Fermi resonance.     

The Reactivity of Associates of Aminomethylated Calix [4] Resorcinolarenes towards P-Nitrophenyl Esters of Phosphorus Acids

Abstract

The kinetics of reactions of aminoinethylated calixarenes (AMC) of different structure (substituents at nitrogen atom as well as on the “lower” rim of cavity are varied) with esters of phosphorus acids has been studied under pseudofirst order conditions in water-DMF and water-alcohol (i-PrOH) solutions by spectrophotometry. The dependences of the observed rate constants of the reactions on the concentrations of AMC reach a plateaus at the investigated values of pH 8 - 1 1. This indicates binding of the substrates by the aggregates of AMC and allows to calculate the parameters of the reactions: CCA, k_a, K_b. It was shown by NMR ³¹P method, that AMC are the catalysts of hydrolysis of esters of phosphorus acids in water-DMF solutions. The higher reactivity of AMC as compared with the one of calix[4]resorcinolarenes and o-aminomethylphenols was found. It was revealed AMC preceeds in both media, however the reactivity of the aggregates is considerably less in the water - alcohol solutions than those in the water - DMF solutions.     

Functional analogues of the dioxygen reduction site in cytochrome oxidase: mechanistic aspects and possible effects of Cu(B)

Catalytic reduction of O(2) and H(2)O(2) by new synthetic analogues of the heme/Cu site in cytochrome c and ubiquinol oxidases has been studied in aqueous buffers. Among the synthetic porphyrins yet reported, those employed in this study most faithfully mimic the immediate coordination environment of the Fe/Cu core. Under physiologically relevant conditions, these biomimetic catalysts reproduce key aspects of the O(2) and H(2)O(2) chemistry of the enzyme. When deposited on an electrode surface, they catalyze the selective reduction of O(2) to H(2)O at potentials comparable to the midpoint potential of cytochrome c. The pH dependence of the half-wave potentials and other data are consistent with O-O bond activation at these centers proceeding via a slow generation of a formally ferric-hydroperoxo intermediate, followed by its rapid reduction to the level of water. This kinetics is analogous to that proposed for the O-O reduction step at the heme/Cu site. It minimizes the steady-state concentration of the catalytic intermediate whose decomposition would release free H(2)O(2). The maximum catalytic rate constants of O(2) reduction by the ferrous catalyst and of H(2)O(2) reduction by both ferric and ferrous catalysts are comparable to those reported for cytochrome oxidase. The oxidized catalyst also displays catalase activity. Comparison of the catalytic properties of the biomimetic complexes in the FeCu and Cu-free forms indicates that, in the regime of rapid electron flux, Cu does not significantly affect the turnover frequency or the stability of the catalysts, but it suppresses superoxide-releasing autoxidation of an O(2)-catalyst adduct. The distal Cu also accelerates O(2) binding and minimizes O-O bond homolysis in the reduction of H(2)O(2).     

EPR Study of Ligand Effects in Spin Triads of Bis(o-Semiquinonato)Copper(II) Complexes

We report the X-band (9 GHz) electron paramagnetic resonance (EPR) study of series of bis(o-semiquinonato)copper(II) complexes with different ligands. It was found previously, that exchange interactions in spin triads of these compounds are very sensitive to the structure of the ligand coordinated to the central copper(II) ion. Ligand moderates the copper–radical and radical–radical exchange interactions and strongly changes the magnetic properties of the compound. Depending on a ligand, ferromagnetic or antiferromagnetic character of exchange dominates in the system. The EPR study of these complexes allowed us to obtain information on zero-field splitting parameters and their distributions in the studied compounds. The EPR results compliment previously obtained spectroscopic data on these compounds and suggest the pronounced plasticity of the clusters manifested in the broad distributions of their rhombicity parameters.     

Development and Application of Ultra Performance Liquid Chromatography Method to the Quantification of the Biotransformation of Methyl Paraben in Eisenia foetida

A simple and quick ultra performance liquid chromatography method (UPLC) has been developed for determination of methyl paraben (MP) and its major metabolites p‐hydroxybenzoic acid (pHBA) and phenol (Phe), following its biotransformations in Eisenia foetida. After different exposure time to paper contact test, the presence of methyl paraben and his biotransformation products in adult earthworms was monitored. Determination of its metabolites was achieved with a BEH (bridged ethane‐silicon hybrid) C₁₈ column (2.1×50 mm i.d., 1.7 µm particle size), using methanol/water/phosphoric acid as mobile phase, under a gradient elution program, and a PDA (photo‐diode array) detection (quantification with MaxPlot in the range 210–400 nm). The absorption of MP did not exceed 30% and in the first 4–6 h after exposure only minute amounts of pHBA and Phe were detected in the worm homogenates. After 48 h of exposures, almost 70% of absorbed MP was already metabolized to Phe and around 20% could be found as pHBA.