Design and Enantioselective Synthesis of Cashmeran Odorants by Using “Enol Catalysis”

Novel Cashmeran odorants were designed by molecular modeling. Their short syntheses involve a novel asymmetric Brønsted acid catalyzed Michael addition of unactivated α‐substituted ketones. This key transformation was realized by utilizing a new type of enol activation catalysis and affords different cyclic ketones bearing α‐quaternary stereocenters in good to excellent yields and with high enantioselectivity. Subsequent McMurry coupling and Saegusa–Ito oxidation furnished the enantiopure target odorants, one enantiomer of which indeed possesses the typical olfactory aspects of Cashmeran.     

Experimental and Computational Studies of the Molybdenum‐Flanking Arene Interaction in Quadruply Bonded Dimolybdenum Complexes with Terphenyl Ligands

To clarify the nature of the Mo?C_arene interaction in terphenyl complexes with quadruple Mo?Mo bonds, ether adducts of composition [Mo₂(Ar′)(I)(O₂CR)₂(OEt₂)] have been prepared and characterized (Ar′=Ar^Xyl₂, R=Me; Ar′=ArMes₂, R=Me; Ar′=Ar^Xyl2, R=CF₃) (Mes=mesityl; Xyl=2,6‐Me₂C₆H₃, from now on xylyl) and their reactivity toward different neutral Lewis bases investigated. PMe₃, P(OMe)₃ and PiPr₃ were chosen as P‐donors and the reactivity studies complemented with the use of the C‐donors CNXyl and CN₂C₂Me₄ (1,3,4,5‐tetramethylimidazol‐2‐ylidene). New compounds of general formula [Mo₂(Ar′)(I)(O₂CR)₂( L )] were obtained, except for the imidazol‐2‐ylidene ligand that yielded a salt‐like compound of composition [Mo₂(Ar^Xyl2)(O₂CMe)₂(CN₂C₂Me₄)₂]I. The Mo?C_arene interaction in these complexes has been analyzed with the aid of X‐ray data and computational studies. This interaction compensates the coordinative and electronic unsaturation of one of the Mo atoms in the above complexes, but it seems to be weak in terms of sharing of electron density between the Mo and C_arene atoms and appears to have no appreciable effect in the length of the Mo?Mo, Mo?X, and Mo? L bonds present in these molecules.     

The influence of calcination on the size of nanocrystals, porous structure and acid–base properties of mesoporous anatase used as catalytic support

Mesoporous anatase was prepared following sol–gel and using urea as template. The influence of calcination temperature on the phase stability, nanocrystal/aggregate size, pore size distribution and specific surface area as well as on the acid–base behavior in aqueous solutions was studied using X-ray diffraction, laser-Raman and diffuse reflectance spectroscopies, scanning electron microscopy and laser scattering as well as N₂ adsorption–desorption isotherms and potentiometric mass titrations.The crystal structure was kept constant upon calcination over the whole temperature range, 200–500 °C. In this range anatase is constituted from primary nanocrystals. These are assembled into larger, rather spherical, clusters of about 30–40 nm and then into aggregates of various sizes (0.2–0.3 μm and 2–100 μm) with a distribution centered at about 12 μm. Increase of the calcination temperature caused an increase in the size of the primary nanocrystals from 8.1 nm at 200 °C to 17.1 nm at 500 °C, whereas calcination does not influence the morphology at micro-scale. Moreover, increase of the calcination temperature from 200 °C to 500 °C brings about a shift in the mean pore diameter from 47 nm to 91 nm accompanied by a decrease in the specific surface area and pore volume. The above effects were related with the aforementioned increase in the size of the primary nanocrystals. The value of pzc and the values of surface charge determined at various pH do not practically depend on the calcination temperature. The absence of pore space confinement effects was explained in terms of the structure and size of the interface development between the anatase surface and the electrolytic solution.     

Synthesis, spectroscopic properties and crystal structure of mononuclear tricarbonylrhenium(I) chloride complexes carrying 6-functionalised quinoxalines

Two quinoxaline derivatives pqCH₃ and pqCl (where pq stands for 2-(2′-pyridyl)quinoxaline) were prepared by condensation of 2-acetyl pyridyl with 2-amino-4-methylphenylamine or 2-amino-4-chlorophenylamine, correspondingly and were studied spectroscopically and electrochemically, in correlation with the originally reported pq. Their novel corresponded complexes namely, fac-[Re(CO)₃Cl(L)] (where L = pqCH₃2 and pqCl 3) were synthesized, characterized, studied and compared to Re(CO)₃Clpq, 1. Complex 2 crystallizes in space group C2/c with a = 20.4476(17) Å, b = 15.4521(13) Å, c = 15.2887(13) Å, β = 126.1210(11)°, Z = 8 and V = 3902.0(6) Å³. The substitution of -H by -CH₃ or -Cl at 6-position of pq has a minor electronic effect on the pyridyl ring of the ligands, but seems to influence the quinoxaline moiety enough to alter the spectroscopical and electrochemical features.     

Amperometric Glucose Biosensors Based on Glassy Carbon and SWCNT‐Modified Glassy Carbon Electrodes

Different carbonaceous materials, such as single‐walled carbon nanotubes (SWCNTs) and glassy carbon submitted to an electrochemical activation at +1.80 V (vs. SCE) for 900 s, have been used with the aim of comparing their performances in the development of enzyme electrodes. Commercial SWCNTs have been pretreated with 2.2 M HNO₃ for 20 h prior to use. The utility of activated GC as promising material for amperometric oxidase‐based biosensors has been confirmed. With glucose oxidase (GOx) as a model enzyme, glucose was efficiently detected up to 1 mM without the use of a mediator. Both electrodes operated in stirred solutions of 0.1 M phosphate buffer (pH 5.5), containing dissolved oxygen, at a potential of ?0.40 V vs. SCE. Although the performances of the two carbonaceous materials were comparable, the biosensors based on activated GC were characterized by a practically unchanged response 40 days after the fabrication, a better signal to noise ratio, and a little worse sensitivity. In addition, the preparation procedure of such biosensors was more simple, rapid and reproducible.     

Real‐Time In Vivo Detection of Cellular Senescence through the Controlled Release of the NIR Fluorescent Dye Nile Blue

In vivo detection of cellular senescence is accomplished by using mesoporous silica nanoparticles loaded with the NIR‐FDA approved Nile blue (NB) dye and capped with a galactohexasaccharide ( S3 ). NB emission at 672 nm is highly quenched inside S3 , yet a remarkable emission enhancement is observed upon cap hydrolysis in the presence of β‐galactosidase and dye release. The efficacy of the probe to detect cellular senescence is tested in vitro in melanoma SK‐Mel‐103 and breast cancer 4T1 cells and in vivo in palbociclib‐treated BALB/cByJ mice bearing breast cancer tumor.     

Enrichments of post‐translational modifications in proteomic studies

More than 300 different protein post‐translational modifications are currently known, but only a few have been extensively investigated because modified proteoforms are commonly present in sub‐stoichiometry amount. For this reason, improvement of specific enrichment techniques is particularly useful for the proteomic characterization of post‐translationally modified proteins. Enrichment proteomic strategies could help the researcher in the challenging issue to decipher the complex molecular cross‐talk existing between the different factors influencing the cellular pathways. In this review the state of art of the platforms applied for the enrichment of specific and most common post‐translational modifications, such as glycosylation and glycation, phosphorylation, sulfation, redox modifications (i.e. sulfydration and nitrosylation), methylation, acetylation, and ubiquitinylation, are described. Enrichments strategies applied to characterize less studied post‐translational modifications are also briefly discussed.     

Improving the Switching Capacity of Glyco-Self-Assembled Monolayers on Au(111)

Self-assembled monolayers (SAMs) decorated with photoisomerizable azobenzene glycosides are useful tools for investigating the effect of ligand orientation on carbohydrate recognition. However, photoswitching of SAMs between two specific states is characterized by a limited capacity. The goal of this study is the improvement of photoswitchable azobenzene glyco-SAMs. Different concepts, in particular self-dilution and rigid biaryl backbones, have been investigated. The required SH-functionalized azobenzene glycoconjugates were synthesized through a modular approach, and the respective glyco-SAMs were fabricated on Au(111). Their photoswitching properties have been extensively investigated by applying a powerful set of methods (IRRAS, XPS, and NEXAFS). Indeed, the combination of tailor-made biaryl-azobenzene glycosides and suitable diluent molecules led to photoswitchable glyco-SAMs with a significantly enhanced and unprecedented switching capacity.     

Multiple Site Hydrogen Isotope Labelling of Pharmaceuticals

Radiolabelling is fundamental in drug discovery and development as it is mandatory for preclinical ADME studies and late-stage human clinical trials. Herein, a general, effective, and easy to implement method for the multiple site incorporation of deuterium and tritium atoms using the commercially available and air-stable iridium precatalyst [Ir(COD)(OMe)]₂ is described. A large scope of pharmaceutically relevant substructures can be labelled using this method including pyridine, pyrazine, indole, carbazole, aniline, oxa-/thia-zoles, thiophene, but also electron-rich phenyl groups. The high functional group tolerance of the reaction is highlighted by the labelling of a wide range of complex pharmaceuticals, containing notably halogen or sulfur atoms and nitrile groups. The multiple site hydrogen isotope incorporation has been explained by the in situ formation of complementary catalytically active species: monometallic iridium complexes and iridium nanoparticles.     

A relativistic CI study on OIII: wavefunctions,excitation energies and transition probabilities

The relativistic CI method is used to determine N-electron wavefunctions for the 1s ² 2s ² 2p ² (³ P ₀,³ P ₂,¹ D ₂), 1s ² 2p ^{4 3} P ₂ even levels, and the 1s ²2s2p ³ (³ D ₁,³ P ₁,³ S ₁,¹ P ₁), 1s ²2s ²2p3s (³ P ₁ and¹ P ₁), 1s ²2s ²2p3d (³ D ₁,³ P ₁,¹ P ₁)J=1 OIII levels. Excitation energies and emission probabilities between these levels are reported in the electric dipole approximation, both for the Coulomb and the Babushkin gauges.ns, p,np,nd- andnd (n17) numerical basis functions have been used for the construction of CSF's entering the CI expansion for the ASF's of these levels. Radiative matrix elements of the type calculated here within the framework of the relativistic CI method, may be used in laser assisted spectroscopic studies of atoms and ions.