Time evolution studies of the H2O/quartz interface using sum frequency generation, atomic force microscopy, and molecular dynamics

Many interfacial studies on solid surfaces, for example, quartz/water, assume that a standard cleaning procedure regenerates the surface reproducibly. In the reported work, the results of two surface specific techniques, sum frequency generation (SFG) spectroscopy and atomic force microscopy, show that the effects of prolonged exposure to Nanopure water and to pH 10 NaOH are distinctly different. In conjunction with the experimental data, molecular mechanics is used to correlate the SFG spectral frequencies to the hydrogen stretching vibrations of the surface-bound water molecules. It is found that after 17 days of soaking in water, water molecules penetrate into the SiO2 matrix to produce a swollen and amorphous layer; it is likely that broken Si-O bonds from the polishing process serve as nucleation sites for hydration and swelling. Disorder introduced in the interfacial water layer is detected by the rising intensity of the weakly hydrogen-bonded SFG peak at 3450 cm(-1). Dominance of the 3450 cm(-1) is absent in a pH 10, NaOH-soaked quartz disk, indicating that the strong hydrogen-bonded network in water remains intact.     

Propylene oxidation by palladium nitro and nitrato complexes: in situ NMR and IR studies

The mechanism of the propylene oxidation by Pd(NO_n)Cl_2 − m(CH₃CN)₂ complexes (n = 2, 3; m = 0, 1, 2) in chloroform solutions has been studied by ¹H NMR and IR spectroscopy. The main reaction products are acetone and 2-nitropropylene, with their ratio depending on the equilibrium existing in the reaction solutions between palladium complexes containing NO_n ligands bonded to a palladium atom via either an oxygen or a nitrogen atom. Reactivities of the oxygen bonded nitrato and nitrito complexes are significantly higher than that of the nitrogen bonded nitro complex. Various new organopalladium intermediates have been observed and monitored in situ. A reversible insertion of the coordinated propylene into the Pd-O or Pd-N bonds results in nitrato-, nitrito- and nitropalladation intermediates, which then decompose via a β-hydrogen elimination. Two isomers of the nitritopalladation intermediate have been detected, i.e., a palladium metallacycle and an open ring complex, with the latter being much more reactive towards the β-hydrogen elimination than the former. The decomposition of the nitrato- and nitritopalladation intermediates results in the organometallic precursor of acetone, i.e., an acetonylpalladium complex, and then in acetone itself. On the other hand, the nitropalladation intermediate originates 2-nitropropylene. In the presence of dioxygen, which re-oxidizes the nitrosyl groups, the acetone formation becomes a catalytic reaction with respect to both palladium and nitrogen.     

Magnetic structure of the europium fulleride ferromagnet Eu(6)C(60)

The powder neutron diffraction technique has been used for the direct observation of magnetic scattering below a Curie temperature of approximately 14 K in the fullerene-based molecular ferromagnet Eu6C60. Europium is in the divalent state with a magnetic moment of 7.1(3) muB per atom, and the configurational symmetry of the magnetic structure is body-centered cubic. Close contacts between Eu2+ and neighboring C60 units provide the signature of orbital hybridization, which can evidently account for the conducting and magnetic properties of the material.     

Transient streaming potential in a finite length microchannel

Pressure-driven flow of an electrolyte solution in a microchannel with charged solid surfaces induces a streaming potential across the microchannel. Such a flow also causes rejection of ions by the microchannel, leading to different concentrations in the feed and permeate reservoirs connecting the capillary, which forms the basis of membrane based separation of electrolytes. Modeling approaches traditionally employed to assess the streaming potential development and ion rejection by capillaries often present a confusing picture of the governing electrochemical transport processes. In this paper, a transient numerical simulation of electrochemical transport process leading to the development of a streaming potential across a finite length circular cylindrical microchannel connecting two infinite reservoirs is presented. The solution based on finite element analysis shows the transient development of ionic concentrations, electric fields, and the streaming potential over the length of the microchannel. The transient analysis presented here resolves several contradictions between the two types of modeling approaches employed in assessing streaming potential development and ion rejection. The simulation results show that the streaming potential across the channel is predominantly set up at the timescale of the developing convective transport, while the equilibrium ion concentrations are developed over a considerably longer duration.     

Characterization of dendrimer properties by capillary electrophoresis and their use as pseudostationary phases

The general properties of dendrimers and in particular their electrolytic characteristics that are relevant in electrokinetic separations, are described. In order to confirm theoretical considerations on commercial dendrimer charge and hydrodynamic radius, several capillary zone electrophoresis (CZE) experiments were performed. Electrophoretic mobilities measured at different pH values indicated a sensible increase of dendrimer hydrodynamic radius at pH values lower than 2.5. This was probably due to the Coulombic repulsion of charged amine groups of the inner dendrimer shells. The principal reasons that should address the use of dendrimers as pseudostationary phases in micellar electrokinetic chromatography (MEKC) are discussed. Moreover, a survey of different separations performed utilizing dendrimers in MEKC as well as of several future plausible uses of various classes of dendrimers is presented.     

Synthesis of new 1,2,3-triazolo[1,2-a]benzotriazole derivatives or substituted 2,3-benzo-1,3a,6,6a-tetraazapentalenes. II

This paper continues the synthesis of new 1,2,3-triazolo[1,2-a]benzotriazoles or 2,3-benzo-1,3a,6,6a-tetrazapentalenes to submit to biological assays. The derivatives were obtained by deoxycyclization reactions of appropriate nitrophenyl-1,2,3-triazole derivatives and by thermal decomposition of appropriate azidophenyl-1,2,3-triazoles (Schemes 1 and 2). Some attempts to extend these synthetic routes to the preparation of 1,2,4-triazolo[1,2-a]benzotriazoles (Scheme 3) and 1,2,3-triazolo[1,2-b]-4H-1,2,3-benzo-triazines (Scheme 4) completely failed.     

New 1,2,3‐triazolo[4,5‐e]1,2,4‐triazolo[4,3‐c]pyrimidine derivatives II

The 7‐chloro‐3‐(2‐chlorobenzyl)‐ and 7‐chloro‐3‐(2‐fluorobenzyl)‐1,2,3‐triazolo[4,5‐d]pyrimidines ( 1 and 4 ), by nucleophilic replacement with some hydrazides, gave the corresponding 7‐hydrazidoderivatives ( 2a‐e and 5a‐e ). These, by heating in Dowtherm, underwent an intramolecular cyclization to form the new tricyclic 7‐substituted‐3‐(2‐chlorobenzyl)‐ and 3‐(2‐fluorobenzyl)‐1,2,3‐triazolo[4,5‐e]1,2,4‐triazolo[4,3‐c]pyrimidines ( 3a‐d and 6a‐d ). The 7‐hydrazino‐3‐(2‐chlorobenzyl)‐ and 7‐hydrazino‐3‐(2‐fluorobenzyl)‐triazolo‐pyrimidines ( 9a and 9b ) were also prepared via the corresponding mercapto ( 7a and 7b ) and thiomethyl ( 8a and 8b ) derivatives.     

The oxidative addition of diphenylphosphine and monophenylphosphine to the electron-rich rhenium-rhenium triple bond. The isolation and characterization of compounds that contain the four-center Re(μ-X)(μ-PR2)Re cluster (X=halide)

Diphenylphosphine oxidatively adds to the ReRe bonds of Re₂ X ₄(-dppm)₂ (X=Cl or Br; dppm=Ph₂PCH₂PPh₂) and Re₂Cl₄(-dpam)₂ (dpam=Ph₂AsCH₂AsPh₂) to afford the dirhenium(III) complexes Re₂(-X)(-PPh₂)HX ₃(-LL)₂. The dppm complexes have also been prepared from the reactions of Re₂(-O₂CCH₃)X ₄(-dppm)₂ with Ph₂PH, and a similar strategy has been used to prepare Re₂(-Cl)(-PPh₂)HCl₃(-dmpm)₂ (dmpm=Me₂PCH₂PMe₂) from Re₂(-O₂CCH₃)Cl₄(dmpm)₂. Phenylphosphine likewise reacts with Re₂ X ₄(-dppm)₂ to give Re₂(-X)(-PHPh)HX ₃(-dppm)₂. An X-ray crystal structure determination on Re₂(-Cl)(-PPh₂)HCl₃(-dppm)₂ confirms its edge-shared bioctahedral structure. This complex crystallizes in the space group (No. 148) witha=21.699(3) Å, =84.50(4)°,V=10084(5) ų, andZ=6. The structure was refined toR=0.049 (R _w 0.069) for 5770 data withI>3.0(I). The Re-Re distance is 2.5918(7) Å. Oxidation of the bromide complex Re₂(-Br)(-PPh₂)HBr₃(-dppm)₂ with NOPF₆ produces the unusual dirhenium(III, II) cation [Re₂(-H)(-Br)[P(O)Ph₂]Br₂(NO)(-dppm)₂]⁺ which has been structurally characterized as its perrhenate salt, [Re₂(-H)(-Br)[P(O)Ph₂]Br₂(NO)(-dppm)₂]ReO₄ · 2CH₂Cl₂. This complex crystallizes in the space group (No. 2) witha=14.187(7) Å,b=16.419(5) Å,c=16.729(5) Å, =98.76(2)°, =110.11(3)°, =104.66(3)°,V=3414(6) ų,Z=2. The structure was refined toR=0.040 (R _w =0.051) for 5736 data withI>3.0(I). The presence of a phosphorus-bound [P(O)Ph₂]^– ligand, a linear nitrosyl and a bridging hydrido ligand has been confirmed. The Re-Re distance is 2.6273(8) Å.