Determination of Intact Parabens in the Human Plasma of Cancer and Non-Cancer Patients Using a Validated Fabric Phase Sorptive Extraction Reversed-Phase Liquid Chromatography Method with UV Detection

Parabens have been widely employed as preservatives since the 1920s for extending the shelf life of foodstuffs, medicines, and daily care products. Given the fact that there are some legitimate concerns related to their potential multiple endocrine-disrupting properties, the development of novel bioanalytical methods for their biomonitoring is crucial. In this study, a fabric phase sorptive extraction reversed-phase liquid chromatography method coupled with UV detection (FPSE-HPLC-UV) was developed and validated for the quantitation of seven parabens in human plasma samples. Chromatographic separation of the seven parabens and p-hydroxybenzoic acid was achieved on a semi-micro Spherisorb ODS1 analytical column under isocratic elution using a mobile phase containing 0.1% (v/v) formic acid and 66% 49 mM ammonium formate aqueous solution in acetonitrile at flow rate 0.25 mL min⁻¹ with a 24-min run time for each sample. The method was linear at a concentration range of 20 to 500 ng mL⁻¹ for the seven parabens under study in human plasma samples. The efficiency of the method was proven with the analysis of 20 human plasma samples collected from women subjected to breast cancer surgery and to reconstructive and aesthetic breast surgery. The highest quantitation rates in human plasma samples from cancerous cases were found for methylparaben and isobutylparaben with average plasma concentrations at 77 and 112.5 ng mL⁻¹. The high concentration levels detected agree with previous findings for some of the parabens and emphasize the need for further epidemiological research on the possible health effects of the use of these compounds.     

Preparation,crystal structures and spectroscopic characterization of oxalate copper(II) complexes containing the nitrogen ligands 4,4′-dimethyl-2,2′-bipyridine and di(2-pyridyl)sulfide

The preparation, crystal structures and spectroscopic characterization of four oxalate copper(II) complexes containing the 4,4′-dimethyl-2,2′-bipyridine (Mebpy) or di(2-pyridyl)sulfide (DPS) nitrogen ligands namely [μ-(ox){Cu(Mebpy)(NO₃)(H₂O)}₂] (1), [μ-(ox){Cu(Mebpy)(ClO₄)(H₂O)}₂] (2), [μ-(ox){Cu(DPS)(H₂O)}₂](ClO₄)₂ (3) and [Cu(DPS)(ox)(H₂O)] · 2H₂O (4) are described. X-ray diffraction measurements have shown that complexes 1–3 are binuclear, in which the oxalate anion bridges two Cu(II) centers, while the complex (4) is mononuclear and the oxalate anion adopts the terminal bidentate chelating coordination mode. In 1 and 2 the Cu(II) sites display a distorted octahedral geometry (4+2 environment) and in compounds 3 and 4 the Cu(II) centers exhibit a slightly distorted square pyramidal geometry. In addition, complexes 1 and 2 present a 2D supramolecular arrangement through hydrogen bonds between coordination water molecules and nitrate or perchlorate anions and π-stacking interaction between the pyridyl rings of Mebpy nitrogen ligands.     

Enzymatic removal of carboxyl protecting groups. III. Fast removal of allyl and chloroethyl esters by Bacillus subtilis esterase (BS2)

An esterase from Bacillus subtilis (BS2) allows the fast and selective removal of allyl, 2-chloroethyl, and 2,2,2-chloroethyl esters under mild conditions in high yields. In addition, BS2 easily hydrolyzes phenacyl esters, while the hydrolysis of sterically hindered diphenylmethyl esters is slow, requiring longer reaction time and higher enzyme/substrate ratio.     

Identification, synthesis, and conformation of tri- and tetrathiacycloalkanes from marine bacteria

Seven new cyclic natural polysulfides 1-7 were identified in extracts of two bacterial Cytophaga strains (CFB-phylum) isolated from biofilms from the North Sea. Their structures are based on mono- and dimeric-cyclization products of 2-methylpropane-1,2-dithiol 8, which was also present in the extract in trace amounts. The structures were deduced by analysis of their mass spectra and confirmed by synthesis. The 1H NMR spectra of some these compounds suggested a high flexibility of the trithiepane and tetrathiocane systems. Therefore, their conformation was further analyzed by DFT calculations and dynamic NMR spectroscopy. While thiepane 4 possesses a twist-chair lowest energy conformation, its isomers 2 and 3 adopt a chairlike conformation, as does the tetrathiocane 5. In contrast, tetrathiocane 6 favors again a twisted chair conformation.     

Determination of nateglinide in human plasma by high-performance liquid chromatography with pre-column derivatization using a coumarin-type fluorescent reagent

A sensitive and selective high-performance liquid chromatographic method has been developed and validated for the determination of nateglinide in human plasma. Nateglinide and the internal standard, undecylenic acid, were extracted from plasma by liquid-liquid extraction using a mixture of ethyl acetate-diethyl ether, 50:50 (v/v). Pre-column derivatization reaction was performed using a coumarin-type fluorescent reagent, N-(7-methoxy-4-methyl-2-oxo-2H-6-chromenyl)-2-bromoacetamide. The derivatization proceeded in acetone in the presence of potassium carbonate and catalyzed by 18-crown-6 ether. The fluorescent derivatives were separated under isocratic conditions on a Hypersil BDS-C8 analytical column (250.0 mm × 2.1 mm i.d., particle size 5 μm) with a mobile phase that consisted of 65% acetonitrile in water and pumped at a flow rate of 0.50 mL min⁻¹. The excitation and emission wavelengths were set at 345 and 435 nm, respectively. The assay was linear over a concentration range of 0.05-16.00 μg mL⁻¹ for nateglinide with a limit of quantitation of 0.05 μg mL⁻¹. Quality control samples (0.05, 4.50 and 16.00 μg mL⁻¹) in five replicates from five different runs of analysis demonstrated intra-assay precision (%coefficient of variation <6.8%), inter-assay precision (%coefficient of variation <1.6%) and an overall accuracy (%relative error) less than −3.4%. The method can be used to quantify nateglinide in human plasma covering a variety of pharmacokinetic or bioequivalence studies.     

Estimation of the band broadening parameters in single detection size-exclusion chromatography: a comparative study of various column combinations

Alternative approaches for the determination of band broadening in size-exclusion chromatography based on the use of exponentially modified Gaussian (EMG) functions were used to experimentally investigate the performance of two different column sets. In both cases, the columns were combined in order to cover the complete fractionation range (from 10³ to 5 × 10⁶ g mol⁻¹), which is of interest in many applications. When analyzing experimental chromatograms the question of proper data treatment (especially the necessary smoothing routines) became obvious and is discussed accordingly. First results indicate that the exponential decay time of the EMG decreases and the standard deviation of its Gaussian component slightly increases (or remains almost constant) with increasing retention volumes. As a consequence, the total variance and the asymmetry of the EMG both decrease with the retention volume. A favorable agreement with independent experimental results (obtained by other researchers on the basis of analyzing ultra narrow standards) was found. Additionally, the skew was also investigated as a function of the retention volume and the trend was found to be in concordance with the predictions of theoretical models. The comparison with theoretical models is also discussed.     

Synthesis, crystal structure, and magnetic studies of oxo-centered trinuclear chromium(III) complexes: [Cr(3)(mu(3)-O)(mu(2)-PhCOO)(6)(H(2)O)(3)]NO(3). 4H(2)O.2CH(3)OH, a case of spin-frustrated system, and [Cr(3)(mu(3)-O)- (mu(2)-PhCOO)(2)(mu(2)-OCH(2)CH(3))(2)(bpy)(2)(NCS )(3)], a new type of [Cr(3)O] core

The synthesis, crystal structure, and magnetic properties of two trinuclear oxo-centered carboxylate complexes are reported and discussed: [Cr3(mu3-O)(mu2-PhCOO)6(H2O)3]NO3.4H2O.2CH3OH (1) and [Cr3(mu3-O)(mu2-PhCOO)2(mu2-OCH2CH3)2(bpy)2(NCS)3] (2). For both complexes the crystal system is monoclinic, with space group C2/c for 1 and P1/n for 2. The structure of complex 1 consists of discrete trinuclear cations, associated NO3- anions, and lattice methanol and water molecules. The structure of complex 2 is built only by neutral discrete trinuclear entities. The most important feature of 2 is the unusual skeleton of the [Cr3O] core due to the lack of peripheral bridging ligands along one side of the triangular core, which is unique among the structurally characterized (mu3-oxo)trichromium(III) complexes. Magnetic measurements were performed in the 2-300 K temperature range. For complex 1, in the high-temperature region (T > 8 K), experimental data could be satisfactorily reproduced by using an isotropic exchange model, H = -2J12S1S2 - 2J13S1S3 - 2J23S2S3 (J12 = J13 = J23) with Jij = -10.1 cm(-1), g = 1.97, and TIP = 550 x 10(-6) emu mol(-1). The antisymmetric exchange interaction plays an important role in the magnetic behavior of the system, so in order to fit the experimental magnetic data at low temperature, a new magnetic model was used where this kind of interaction was also considered. The resulting fitting parameters are the following: Gzz = 0.25 cm(-1), delta = 2.5 cm(-1), and TIP = 550 x 10(-6) emu mol(-1). For complex 2, the experimental data could be satisfactorily reproduced by using an isotropic exchange model, H = -2J1(S1S2 + S1S3) - 2J2(S2S3) with J1 = -7.44 cm(-1), J2 = -51.98 cm(-1), and g = 1.99. The magnetization data allows us to deduce the ground term of S = 1/2, characteristic of equilateral triangular chromium(III) for complex 1 and S = 3/2 for complex 2, which is confirmed by EPR measurements.     

Trapping of anionic organic radicals by (TpMe2)2Ln (Ln = Sm, Eu)

Stoichiometric reaction of [ Sm(Tp(Me2))2 ], 1, with a variety of reducible ketone- and quinone-type substrates gave thermally stable, isolable radical anions/ketyls in moderate to good yields. Thus reaction with benzophenone gave [Sm(Tp(Me2))2(OCPh2)], 2, with fluorenone [Sm(Tp(Me2))2(eta1-OC13H8)], 3, and di-tert-butylparaquinone [Sm(Tp(Me2))2(eta1-OC6H2(tBu)2O)], 4, each of which was structurally characterized. In the case of the less-hindered benzoquinone, an unimetallic semiquinone [Sm(Tp(Me2))2(OC6H4O)], 5, could be isolated, although it was unstable with respect to formation of the dimetallic complex [Sm(Tp(Me2))2]2(mu-OC6H4O), 6. Compound 6 was structurally characterized, as was its anthraquinone analogue [Sm(Tp(Me2))2]2(mu-OC14H8O), 7. When the analogous reaction was carried out between the less-reducing [Eu(Tp(Me2))2] and benzoquinone, only the europium analogue of the semiquinone 5, [Eu(Tp(Me2))2(OC6H4O)], 8, could be isolated. The use of the sterically hindered 3,5-di-tert-butyl-o-benzoquinone allowed isolation of [Sm(Tp(Me2))2(DTBSQ)], 9.     

Modeling microscopic swimmers at low Reynolds number

The authors employ three numerical methods to explore the motion of low Reynolds number swimmers, modeling the hydrodynamic interactions by means of the Oseen tensor approximation, lattice Boltzmann simulations, and multiparticle collision dynamics. By applying the methods to a three bead linear swimmer, for which exact results are known, the authors are able to compare and assess the effectiveness of the different approaches. They then propose a new class of low Reynolds number swimmers, generalized three bead swimmers that can change both the length of their arms and the angle between them. Hence they suggest a design for a microstructure capable of moving in three dimensions. They discuss multiple bead, linear microstructures and show that they are highly efficient swimmers. They then turn to consider the swimming motion of elastic filaments. Using multiparticle collision dynamics the authors show that a driven filament behaves in a qualitatively similar way to the micron-scale swimming device recently demonstrated by Dreyfus et al. [Nature (London) 437, 862 (2005)].