Mixing method influence on compatibility and polymorphism studies by DSC and statistical analysis

Most of the pharmaceutical products are formulated as solid dosage form, which may present drug–excipient interactions that lead to changes in the chemical nature of the drug, such as solubility and bioavailability and may compromise its safety and effectiveness. Differential scanning calorimetry (DSC) is a widely used method for the rapid evaluation of the drug-excipient compatibility and the stability of the mixture formed; however, there is no consensus on the preparation methods of the drug–excipient mixtures. The aim of this study was to investigate the influence of the mixing method on the drug–excipient compatibility studies by means of DSC analysis, using tenofovir disoproxil fumarate as a drug model. Statistical analysis revealed significant differences in the heat of fusion of the drug in the mixtures prepared by several mixing methods. Vortex Mixer with a Pop-Off Cup used for 3 min proved to be very satisfactory for these studies. A polymorphic transition was observed in the mixture prepared with the mortar and pestle. Therefore, this method should be avoided since it may induce errors in the interpretation of DSC results. In this way, the mixing method used to prepare a mixture for studies of interactions between the API and the excipients in a pharmaceutical formulation has a great influence on the results and it must be chosen carefully.     

On the blowing up of solutions to quantum hydrodynamic models on bounded domains

The blow-up in finite time for the solutions to the initial-boundary value problem associated to the multi-dimensional quantum hydrodynamic model in a bounded domain is proved. The model consists on conservation of mass equation and a momentum balance equation equivalent to a compressible Euler equations corrected by a dispersion term of the third order in the momentum balance. The proof is based on a priori estimates for the energy functional for a new observable constructed with an auxiliary function, and it is shown that, under suitable boundary conditions and assumptions on the initial data, the solution blows up after a finite time. I.M. Gamba is supported by NSF-DMS0507038. M.P. Gualdani acknowledges partial support from the Deutsche Forschungsgemeinschaft, grants JU359/5 and was partially supported under the Feodor Lynen Research fellowship. P. Zhang is partially supported by the NSF of China under Grant 10525101 and 10421101, and the innovation grant from the Chinese Academy of Sciences. Part of the work was done when P. Zhang visited the Department of Mathematics of Texas University at Austin, the author would like to thank the hospitality of the department. Support from the Institute for Computational Engineering and Sciences at the University of Texas at Austin is also gratefully acknowledged.     

Preventive doping control analysis: liquid and gas chromatography time-of-flight mass spectrometry for detection of designer steroids

A new combined doping control screening method for the analysis of anabolic steroids in human urine using liquid chromatography/electrospray ionization orthogonal acceleration time-of-flight mass spectrometry (LCoaTOFMS) and gas chromatography/electron ionization orthogonal acceleration time-of-flight mass spectrometry (GCoaTOFMS) has been developed in order to acquire accurate full scan MS data to be used to detect designer steroids. The developed method allowed the detection of representative prohibited substances, in addition to steroids, at concentrations of 10 ng/mL for anabolic agents and metabolites, 30 ng/mL for corticosteroids, 500 ng/mL for stimulants and beta-blockers, 250 ng/mL for diuretics, and 200 ng/mL for narcotics. Sample preparation was based on liquid-liquid extraction of hydrolyzed human urine, and the final extract was analyzed as trimethylsilylated derivatives in GCoaTOFMS and underivatized in LCoaTOFMS in positive ion mode. The sensitivity, mass accuracy, advantages and limitations of the developed method are presented.     

C(3)-alkylation and cyclization of pyrazino[1,2-b]isoquinolin-4-ones

To avoid the epimerization of the C(11a)-stereocenter previously observed in 6,11a-cis-pyrazino[1,2-b]isoquinolin-1,4-diones, we present in this paper the C(3)-alkylation of 1-methoxy-pyrazino[1,2-b]isoquinolin-4-ones to obtain all-cis derivatives through a very reliable protocol. The success of the acid-promoted cyclization to get pentacyclic (R₃=arylmethyl) or tetracyclic (R₃=2-bromo-2-propenyl) compounds is dependent on the nature of the C(3)-unsaturated chain and of the N-substituent, but these limitations have been overcome by using trifluoromethanesulfonic as a superacid catalyst. The C-(3)-alkylation of pyrazino[1,2-b]isoquinolin-4-one is also studied.     

Hydrophilic interaction liquid chromatography/positive ion electrospray ionization mass spectrometry method for the quantification of perindopril and its main metabolite in human plasma

A validated method based on liquid chromatography/positive ion electrospray–mass spectrometry (LC-ESI/MS) is described for the quantification of perindopril and its active metabolite, perindoprilat, in human plasma. The assay was based on 500-μL plasma samples, following solid-phase extraction using Oasis HLB cartridges. All analytes and the internal standard (trandolapril) were separated by hydrophilic interaction liquid chromatography using a SeQuant Zic-HILIC analytical column (150.0?×?2.1 mm i.d., particle size 3.5 μm, 200 Å) with isocratic elution. The mobile phase consisted of 10% 5.0 mM ammonium acetate water solution in a binary mixture of acetonitrile/methanol (60:40, v/v) and pumped at a flow rate of 0.10 mL min^?1. Quantitation of the analytes was performed with selected ion monitoring (SIM) in positive ionization mode using electrospray ionization interface. The assay was found to be linear in the concentration range of 5.0–500.0 ng mL^?1 for perindopril and perindoprilat. Intermediate precision were found less than 3.5% over the tested concentration ranges. A run time of less than 6.0 min for each sample made it possible to analyze a large number of human plasma samples per day. The method is the first reported application of HILIC in the analysis of angiotensin-converting enzyme inhibitors and can be used to quantify perindopril and perindoprilat in human plasma covering a variety of pharmacokinetic or bioequivalence studies.     

Ethanol/water solutions as certified reference materials for breath alcohol analyzer calibration

The Federal Institute for Materials Research and Testing (BAM), Germany, has issued a series of large volume ethanol in water certified reference materials (CRMs), primarily developed for the calibration of evidential breath alcohol analyzers in Germany. The certified parameter is the ethanol mass concentration at 20 °C. When used in a wet bath simulator, the solutions deliver gas samples that meet the requirements set by the Organization of Legal Metrology for calibration of breathalyzers. The materials were prepared gravimetrically by spiking of ethanol into water in single 5 L units. A complete uncertainty budget for the preparation process has been established. The purity of the commercial ethanol stock solution was identified to be the main source of uncertainty. For stability and homogeneity measurements and for the verification of the gravimetric mass concentration of the CRMs, a robust high-precision gas chromatography, with flame-ionization detection method for ethanol determination in aqueous samples was developed and validated. The good performance of this method has been demonstrated in several international comparisons organized by the Consultative Committee for Amount of Substance—Metrology in Chemistry at the International Bureau of Weights and Measures.     

The Quenched Instationary Polymerization System, 3. Derivation of the Radical and Polymer Chain Length Distributions for Any Combination of Two Periods Differing in Initiation Characteristics

The radical and polymer chain length distributions and their respective convolutes were calculated for any combination of an initiation period followed by a dark period without any initiation. The distributions are characterized by the appearance of an asymmetric (broad) additional peak. The choice of the experimental parameters (i. e. duration of the initiation and the dark period) influences the location of the peak as well as the extension of the complete distribution curve. The first and second derivatives also show a characteristic pattern in the region of the peak. A single experiment yields at least two k_p-values which are determined from different parts of the distribution. These values have to be identical unless k_p is not characterized by a single value. In principle, a single experiment will suffice to display possible irregularities in k_p-constancy.     

Hydrogen bonding in the hexagonal ice surface

A recently developed technique in sum frequency generation spectroscopy, polarization angle null (or PAN-SFG), is applied to two orientations of the prism face of hexagonal ice. It is found that the vibrational modes of the surface are similar in different faces. As in the basal face, the prism face of ice contains five dominant resonances: 3096, 3146, 3205, 3253, and 3386 cm(-1). On the basal face, the reddest resonance occurs at 3098 cm(-1); within the bandwidth, the same as the prism face. On both the prism and basal faces, this mode contains a significant quadrupole component and is assigned to the bilayer stitching hydrogen bonds. The bluest of the resonances, 3386 cm(-1), occurs slightly blue-shifted at 3393 cm(-1) in the basal face. The prism face has two orientations: one with the optic or c axis in the input plane (the plane formed by the surface normal and the interrogating beam propagation) and one with the c axis perpendicular to the input plane. The 3386 cm(-1) mode has significant intensity only with the c axis in the input plane. On the basis of these orientation characteristics, the 3386 cm(-1) mode is assigned to double-donor molecules in either the top half bilayer or in the lower half bilayer. On the basis of frequency considerations, it is assigned to double-donor molecules in the top half bilayer. These are water molecules containing a nonbonded lone pair. In addition to identification of the components of the broad hydrogen-bonded region, PAN-SFG measures the tangential vs longitudinal content of the vibrational modes. In accord with previous suggestions, the lower frequency modes are predominantly tangential, whereas the higher frequency modes are mainly longitudinal. On the prism face, the 3386 cm(-1) mode is entirely longitudinal.