Performance of columns packed with the new shell particles,Kinetex-C18

The performance of the new Kinetex-C₁₈ column was investigated. Packed with a new brand of porous shell particles, this column has an outstanding efficiency. Once corrected for the contribution of the instrument extra column volume, the minimum values of the reduced plate heights for a number of low molecular weight compounds (e.g., anthracene and naphtho[2,3-a]pyrene) were between 1.0 and 1.3, breaking the legendary record set 3 years ago by Halo-C₁₈ packed columns. The liquid-solid mass transfer of proteins (e.g., insulin and lyzozyme) is exceptionally fast on Kinetex-C₁₈ much faster than on the Halo-C₁₈ column. The different contributions of dispersion and mass transfer resistances to the column efficiency were determined and discussed. The possible reasons for this extremely high column efficiency are discussed.     

Brønsted Acid Assisted Regio‐ and Enantioselective Direct O‐Nitroso Aldol Reaction Catalysed by α,α‐Diphenylprolinol Trimethylsilyl Ether

In the presence of p‐nitrobenzoic acid, the O‐nitroso aldol reaction of nitrosobenzene with enolisable aldehydes may be promoted by commercially available α,α‐diphenylprolinol trimethylsilyl ether. The reaction proceeds with good yields and essentially complete enantioselectivity, with catalyst loadings in the 5–10 mol % range. The resulting α‐oxyaldehyde adducts may be transformed in situ into α‐oxyimines, which provide 1,2‐amino alcohols upon treatment with Grignard reagents, in good overall yield (45–59 %) and with typical diastereomeric ratios ≥95:5.     

A Cauchy kernel for slice regular functions

In this article, we show how to construct a regular, non-commutative Cauchy kernel for slice regular quaternionic functions. We prove an (algebraic) representation formula for such functions, which leads to a new Cauchy formula. We find the expression of the derivatives of a regular function in terms of the powers of the Cauchy kernel, and we present several other consequent results.     

Certification of reference materials for ochratoxin A analysis in coffee and wine

Mycotoxins are important non-anthropogenic food and feed contaminants, which can be present on almost every agricultural commodity. Effective consumer protection therefore essentially depends on food surveillance by reliable quantitative analysis enabled by appropriate quality control. Certified (matrix) reference materials (CRMs) are versatile tools to support quality assurance. However, in the case of ochratoxin A (OTA), a hepato- and nephrotoxic mycotoxin, which is regulated in various foods, there is a lack of suitable CRMs. This lack has now been overcome by the development of two European Reference Materials (ERM^?) for the determination of OTA in roasted coffee (ERM^?-BD475) and red wine (ERM^?-BD476). This article discusses the material preparation process as well as the results of homogeneity and stability testing. Furthermore, the results of the in-house certification studies carried out at BAM Federal Institute for Materials Research and Testing are presented and discussed. Interlaboratory comparison studies involving selected expert laboratories with documented expertise in the field of mycotoxin analysis were conducted to confirm the certified values determined by BAM. The certified ochratoxin A values and their corresponding expanded uncertainties (k?=?2) were assigned in full compliance with the requirements of ISO Guide 35 and are as follows: (6.0?±?0.6)???g?kg^?1 for roasted coffee, ERM^?-BD475, and (0.52?±?0.11)???g?L^?1 for red wine, ERM^?-BD476.     

Characterization of bronze Roman coins of the fifth century called <Emphasis Type="Italic">nummi</Emphasis> through different analytical techniques

Mixing of different organic charge-transfer-complexes (CT-complexes) might allow the adjustment of the optical and morphological properties of the resulting material system. In this work, a study of two CT-complexes, mixed by thermal coevaporation at different concentrations by substituting only the acceptor molecules, is presented. Electron diffraction patterns, which were collected on samples of the ternary system of the prototypical CT-complexes DBTTF-TCNQ and DBTTF-F₄TCNQ do not show any indication of a mixed crystalline phase or novel crystalline order. X-ray diffraction measurements additionally confirm the phase separation in the ternary system. However, upon mixing of the complexes, the degree of crystallinity of the individual phases is reduced. This effect correlates with the mixing ratio of the CT-complexes in the ternary compound. Furthermore, we do not observe a shift or the appearance of new peaks in the infrared spectra of (DBTTF-TCNQ) _x :(DBTTF-F₄TCNQ)_1?x . Hence, there is no indication for a pronounced or novel chemical interaction between the individual CT-complexes in the mixed compound.     

Comparison of two types of vertically aligned ZnO NRs for highly efficient polymer solar cells

Vertically aligned ZnO nanorods (NR) are prepared by two different syntheses methods and applied on polymer solar cells (PSCs). The ZnO electrodes work as the electron transport layer with the P3HT:PCBM blend acting as the active material. Several organic blend solution conditions are optimized: concentration, solvent, and deposition speed. The effect of different NR electrode morphologies is analyzed on the solar cell performance and characterized by current–voltage curves and IPCE analyses. The photovoltaic performance of the solar cells was observed to be influenced by many factors, among them infiltration of the organic P3HT:PCBM blend within the ZnO NR layer. The infiltration of the active layer was monitored by cross section SEM and energy dispersive X-ray spectroscopy analyses. Our results show that higher power conversion efficiencies are achieved when shorter NRs lengths are applied. The best power conversion efficiency obtained was 2.0% for a 400 nm ZnO NR electrode. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

The influence of sensitivity for road traffic noise on residential location: does it trigger a process of spatial selection?

People move to another house for different reasons. It is sometimes presumed that a process of self-selection might take place on the basis of noise sensitivity, i.e., sensitive people would either leave high noise areas or not move into these areas in the first place. Thus, a "survivor population" would remain in the high noise areas. This research aims to investigate whether such a process can be observed in the Netherlands. The study does not show evidence of a process of self-selection based on noise sensitivity. Nevertheless, the results suggest that noise-sensitive people are less satisfied with their living environment and are more willing to move than those who are not noise sensitive. Due to the limited sample size, external validity is limited.     

Use of reciprocity considerations for the two-dimensional BEM analysis of wave propagation in an elastic half-space with applications to acoustic emission

A simple numerical treatment of the infinite boundary in the BEM analysis of two-dimensional wave propagation problems in elastic half-spaces is proposed to avoid the spurious reflections of non-decaying Rayleigh waves introduced by the truncation of the boundary. The proposed method exploits the knowledge of the far-field asymptotic behavior of the solution to adequately correct the BEM displacement system matrix for the truncated problem to account for the contribution of the omitted part of the boundary. The reciprocal theorem of elastodynamics is used for a convenient computation of this contribution exclusively in terms of the boundary integrals of the original BEM system. The method is applied to the study of the acoustic emission from nucleating and propagating surface-breaking and buried cracks in a two-dimensional elastic half-space. It is shown to be particularly advantageous since it allows for an accurate calculation of the generated signal even when the observation point is located far from the acoustic emission source.     

Production of the Bengamide Class of Marine Natural Products in Myxobacteria: Biosynthesis and Structure–Activity Relationships

The bengamides, sponge‐derived natural products that have been characterized as inhibitors of methionine aminopeptidases (MetAPs), have been intensively investigated as anticancer compounds. We embarked on a multidisciplinary project to supply bengamides by fermentation of the terrestrial myxobacterium M. virescens, decipher their biosynthesis, and optimize their properties as drug leads. The characterization of the biosynthetic pathway revealed that bacterial resistance to bengamides is conferred by Leu 154 of the myxobacterial MetAP protein, and enabled transfer of the entire gene cluster into the more suitable production host M. xanthus DK1622. A combination of semisynthesis of microbially derived bengamides and total synthesis resulted in an optimized derivative that combined high cellular potency in the nanomolar range with high metabolic stability, which translated to an improved half‐life in mice and antitumor efficacy in a melanoma mouse model.