Characterization of dendrimer properties by capillary electrophoresis and their use as pseudostationary phases

The general properties of dendrimers and in particular their electrolytic characteristics that are relevant in electrokinetic separations, are described. In order to confirm theoretical considerations on commercial dendrimer charge and hydrodynamic radius, several capillary zone electrophoresis (CZE) experiments were performed. Electrophoretic mobilities measured at different pH values indicated a sensible increase of dendrimer hydrodynamic radius at pH values lower than 2.5. This was probably due to the Coulombic repulsion of charged amine groups of the inner dendrimer shells. The principal reasons that should address the use of dendrimers as pseudostationary phases in micellar electrokinetic chromatography (MEKC) are discussed. Moreover, a survey of different separations performed utilizing dendrimers in MEKC as well as of several future plausible uses of various classes of dendrimers is presented.     

Magnetic structure of the europium fulleride ferromagnet Eu(6)C(60)

The powder neutron diffraction technique has been used for the direct observation of magnetic scattering below a Curie temperature of approximately 14 K in the fullerene-based molecular ferromagnet Eu6C60. Europium is in the divalent state with a magnetic moment of 7.1(3) muB per atom, and the configurational symmetry of the magnetic structure is body-centered cubic. Close contacts between Eu2+ and neighboring C60 units provide the signature of orbital hybridization, which can evidently account for the conducting and magnetic properties of the material.     

The oxidative addition of diphenylphosphine and monophenylphosphine to the electron-rich rhenium-rhenium triple bond. The isolation and characterization of compounds that contain the four-center Re(μ-X)(μ-PR2)Re cluster (X=halide)

Diphenylphosphine oxidatively adds to the ReRe bonds of Re₂ X ₄(-dppm)₂ (X=Cl or Br; dppm=Ph₂PCH₂PPh₂) and Re₂Cl₄(-dpam)₂ (dpam=Ph₂AsCH₂AsPh₂) to afford the dirhenium(III) complexes Re₂(-X)(-PPh₂)HX ₃(-LL)₂. The dppm complexes have also been prepared from the reactions of Re₂(-O₂CCH₃)X ₄(-dppm)₂ with Ph₂PH, and a similar strategy has been used to prepare Re₂(-Cl)(-PPh₂)HCl₃(-dmpm)₂ (dmpm=Me₂PCH₂PMe₂) from Re₂(-O₂CCH₃)Cl₄(dmpm)₂. Phenylphosphine likewise reacts with Re₂ X ₄(-dppm)₂ to give Re₂(-X)(-PHPh)HX ₃(-dppm)₂. An X-ray crystal structure determination on Re₂(-Cl)(-PPh₂)HCl₃(-dppm)₂ confirms its edge-shared bioctahedral structure. This complex crystallizes in the space group (No. 148) witha=21.699(3) Å, =84.50(4)°,V=10084(5) ų, andZ=6. The structure was refined toR=0.049 (R _w 0.069) for 5770 data withI>3.0(I). The Re-Re distance is 2.5918(7) Å. Oxidation of the bromide complex Re₂(-Br)(-PPh₂)HBr₃(-dppm)₂ with NOPF₆ produces the unusual dirhenium(III, II) cation [Re₂(-H)(-Br)[P(O)Ph₂]Br₂(NO)(-dppm)₂]⁺ which has been structurally characterized as its perrhenate salt, [Re₂(-H)(-Br)[P(O)Ph₂]Br₂(NO)(-dppm)₂]ReO₄ · 2CH₂Cl₂. This complex crystallizes in the space group (No. 2) witha=14.187(7) Å,b=16.419(5) Å,c=16.729(5) Å, =98.76(2)°, =110.11(3)°, =104.66(3)°,V=3414(6) ų,Z=2. The structure was refined toR=0.040 (R _w =0.051) for 5736 data withI>3.0(I). The presence of a phosphorus-bound [P(O)Ph₂]^– ligand, a linear nitrosyl and a bridging hydrido ligand has been confirmed. The Re-Re distance is 2.6273(8) Å.     

Surface functionalization of silica nanoparticles supports colloidal stability in physiological media and facilitates internalization in cells

The influence of the surface functionalization of silica particles on their colloidal stability in physiological media is studied and correlated with their uptake in cells. The surface of 55 ± 2 nm diameter silica particles is functionalized by amino acids or amino- or poly(ethylene glycol) (PEG)-terminated alkoxysilanes to adjust the zeta potential from highly negative to positive values in ethanol. A transfer of the particles into water, physiological buffers, and cell culture media reduces the absolute value of the zeta potential and changes the colloidal stability. Particles stabilized by L-arginine, L-lysine, and amino silanes with short alkyl chains are only moderately stable in water and partially in PBS or TRIS buffer, but aggregate in cell culture media. Nonfunctionalized, N-(6-aminohexyl)-3-aminopropyltrimethoxy silane (AHAPS), and PEG-functionalized particles are stable in all media under study. The high colloidal stability of positively charged AHAPS-functionalized particles scales with the ionic strength of the media, indicating a mainly electrostatical stabilization. PEG-functionalized particles show, independently from the ionic strength, no or only minor aggregation due to additional steric stabilization. AHAPS stabilized particles are readily taken up by HeLa cells, likely as the positive zeta potential enhances the association with the negatively charged cell membrane. Positively charged particles stabilized by short alkyl chain aminosilanes adsorb on the cell membrane, but are weakly taken up, since aggregation inhibits their transport. Nonfunctionalized particles are barely taken up and PEG-stabilized particles are not taken up at all into HeLa cells, despite their high colloidal stability. The results indicate that a high colloidal stability of nanoparticles combined with an initial charge-driven adsorption on the cell membrane is essential for efficient cellular uptake.     

An implantable biofuel cell for a live insect

A biofuel cell incorporating a bienzymatic trehalase|glucose oxidase trehalose anode and a bilirubin oxidase dioxygen cathode using Os complexes grafted to a polymeric backbone as electron relays was designed and constructed. The specific power densities of the biofuel cell implanted in a female Blaberus discoidalis through incisions into its abdomen yielded maximum values of ca. 55 μW/cm(2) at 0.2 V that decreased by only ca. 5% after ca. 2.5 h of operation.     

Comparison of electron spin resonance probe and dielectric relaxation in physically and chemically crosslinked polymers

Dielectric relaxation spectroscopy in the frequency range from 10⁻² Hz to 10⁶ Hz and electron spin resonance (ESR) experiments are employed to study the dynamics in chemically and physically crosslinked networks. As examples for physically crosslinked networks ortho- and para-cresol novolacs were investigated. Dielectrically these materials show low-temperature β- and high-temperature α-relaxation. Both relaxation regions differ for both types of novolacs. This is also reflected by the ESR measurements and is discussed in terms of different hydrogen bonds found to be stronger in para-cresol novolac. For the chemically crosslinked poly(triallyl isocyanurate) only a β-peak is found by the dielectric measurements. Also in the ESR experiment the slow motion regime is characterized up to high temperatures. This means that the segmental motion is strongly suppressed by chemical crosslinking. Nevertheless the obtained change in the formal T_50G value can be used to characterize the glass transition in highly crosslinked systems by the ESR method.     

Mikrobieller Abbau organischer Fremdstoffe im Boden

Im Prinzip kann fast jede organische Industriechemikalie durch die Mikroorganismen des Bodens abgebaut werden.     

C(3)-alkylation and cyclization of pyrazino[1,2-b]isoquinolin-4-ones

To avoid the epimerization of the C(11a)-stereocenter previously observed in 6,11a-cis-pyrazino[1,2-b]isoquinolin-1,4-diones, we present in this paper the C(3)-alkylation of 1-methoxy-pyrazino[1,2-b]isoquinolin-4-ones to obtain all-cis derivatives through a very reliable protocol. The success of the acid-promoted cyclization to get pentacyclic (R₃=arylmethyl) or tetracyclic (R₃=2-bromo-2-propenyl) compounds is dependent on the nature of the C(3)-unsaturated chain and of the N-substituent, but these limitations have been overcome by using trifluoromethanesulfonic as a superacid catalyst. The C-(3)-alkylation of pyrazino[1,2-b]isoquinolin-4-one is also studied.     

Hydrophilic interaction liquid chromatography/positive ion electrospray ionization mass spectrometry method for the quantification of perindopril and its main metabolite in human plasma

A validated method based on liquid chromatography/positive ion electrospray–mass spectrometry (LC-ESI/MS) is described for the quantification of perindopril and its active metabolite, perindoprilat, in human plasma. The assay was based on 500-μL plasma samples, following solid-phase extraction using Oasis HLB cartridges. All analytes and the internal standard (trandolapril) were separated by hydrophilic interaction liquid chromatography using a SeQuant Zic-HILIC analytical column (150.0?×?2.1 mm i.d., particle size 3.5 μm, 200 Å) with isocratic elution. The mobile phase consisted of 10% 5.0 mM ammonium acetate water solution in a binary mixture of acetonitrile/methanol (60:40, v/v) and pumped at a flow rate of 0.10 mL min^?1. Quantitation of the analytes was performed with selected ion monitoring (SIM) in positive ionization mode using electrospray ionization interface. The assay was found to be linear in the concentration range of 5.0–500.0 ng mL^?1 for perindopril and perindoprilat. Intermediate precision were found less than 3.5% over the tested concentration ranges. A run time of less than 6.0 min for each sample made it possible to analyze a large number of human plasma samples per day. The method is the first reported application of HILIC in the analysis of angiotensin-converting enzyme inhibitors and can be used to quantify perindopril and perindoprilat in human plasma covering a variety of pharmacokinetic or bioequivalence studies.     

Ethanol/water solutions as certified reference materials for breath alcohol analyzer calibration

The Federal Institute for Materials Research and Testing (BAM), Germany, has issued a series of large volume ethanol in water certified reference materials (CRMs), primarily developed for the calibration of evidential breath alcohol analyzers in Germany. The certified parameter is the ethanol mass concentration at 20 °C. When used in a wet bath simulator, the solutions deliver gas samples that meet the requirements set by the Organization of Legal Metrology for calibration of breathalyzers. The materials were prepared gravimetrically by spiking of ethanol into water in single 5 L units. A complete uncertainty budget for the preparation process has been established. The purity of the commercial ethanol stock solution was identified to be the main source of uncertainty. For stability and homogeneity measurements and for the verification of the gravimetric mass concentration of the CRMs, a robust high-precision gas chromatography, with flame-ionization detection method for ethanol determination in aqueous samples was developed and validated. The good performance of this method has been demonstrated in several international comparisons organized by the Consultative Committee for Amount of Substance—Metrology in Chemistry at the International Bureau of Weights and Measures.