Nanocomposite Polymer Electrolytes of Sodium Alginate and Montmorillonite Clay

Nanocomposite polymer electrolytes (NPEs) were synthesized using sodium alginate (Alg) and either sodium (SCa-3-Na⁺)- or lithium (SCa-3-Li⁺)-modified montmorillonite clays. The samples were characterized by structural, optical, and electrical properties. SCa-3-Na⁺ and SCa-3-Li⁺ clays’ X-ray structural analyses revealed peaks at 2θ = 7.2° and 6.7° that corresponded to the interlamellar distances of 12.3 and 12.8 Å, respectively. Alg-based NPEs X-ray diffractograms showed exfoliated structures for samples with low clay percentages. The increase of clay content promoted the formation of intercalated structures. Electrochemical Impedance Spectroscopy revealed that Alg-based NPEs with 5 wt% of SCa-3-Na⁺ clay presented the highest conductivity of 1.96 × 10⁻² S/cm², and Alg with 10 wt% of SCa-3-Li⁺ showed conductivity of 1.30 × 10⁻² S/cm², both measured at 70 °C. From UV-Vis spectroscopy, it was possible to infer that increasing concentration of clay promoted a decrease of the samples’ transmittance and, consequently, an increase of their reflectance.     

Enantioselective Total Synthesis of (+)-Nordasycarpidone, (+)-Dasycarpidone,and (+)-Uleine

The structure of uleine type alkaloids is characterized by the presence of a bridged tetracyclic hexahydro-1H-1,5-methanoazocino[4,3-b]indole ring system 1 . Various strategies have been developed to access this polycyclic structural motif. We report herein a one-step conversion of appropriately functionalized 1,3,4-trisubstituted cyclopent-1-ene to 1 by way of an integrated oxidation/reduction/cyclization (iORC) process. This domino sequence, initiated by oxidative cleavage of cyclopentene ring, generated subsequently a cyclohexenone, an indole and a 1,3-bridged piperidine ring through formation of one C−C and two C−N bonds. Compound 1 is subsequently converted to nordasycarpidone, dasycarpidone and uleine. The chirality of the molecule was introduced by enzymatic desymmetrization of commercially available meso cis-3,5-diacetoxy-1-cyclopentene.     

Secondary Metabolites of Clinacanthus nutans

Chemistry of Natural Compounds -     

Secondary Metabolites of Mahonia bealei

Chemistry of Natural Compounds -     

Acetylene Derivatives of Cationic Diazaoxatriangulenes and Diaza [4]Helicenes - Access to Red Emitters and Planar Chiral Stereochemical Traits

Cationic triangulenes, and related helicenes, constitute a rich class of dyes and fluorophores, usually absorbing and emitting light at low energy, in the orange to red domains. Recently, to broaden the scope of applications, regioselective late-stage functionalizations on these core moieties have been developed. For instance, with the introduction of electron-donating groups (EDGs), important bathochromic shifts are observed pushing absorptions towards or in the near-infrared (NIR) spectral domain while emissive properties disappear essentially completely. Herein, to upset this drawback, acetylene derivatives of cationic diazaoxa triangulenes (DAOTA) and [4]helicenes are prepared (16 examples). Contrary to other EDG-functionalized derivatives, C≡C− functionalized products remain broadly fluorescent, with red-shifted absorptions (Δλ_abs up to 25 nm) and emissions (Δλ_em up to 73 nm, Φ_PL up to 51 %). Quite interestingly, a general dynamic stereoisomerism phenomenon is evidenced for the compounds derived from achiral DAOTA cores. At low temperature in ¹H NMR spectroscopy (218 K), N−CH₂ protons become diastereotopic with chemical shifts differences (Δδ) as high as +1.64 ppm. The signal coalescence occurs around 273 K with a barrier of ∼12 kcal mol⁻¹. This phenomenon is due to planar chiral conformations (S_p and R_p configurations), induced by the geometry of the alkyl (n-propyl) side-chains next to the acetylenic substituents. Ion pairing studies with Δ-TRISPHAT anion not only confirm the occurrence of the chiral conformations but evidence a moderate but definite asymmetric induction from the chiral anion onto the cations. Finally, DFT calculations offer a valuable insight on the geometries, the corresponding stereodynamics and also on the very large difference in NMR for some of the diastereotopic protons.     

Experimental investigation of the failure mechanism of fiber-reinforced composites subjected to uniaxial tension

In this investigation, the components of displacement in the axial direction throughout the surface of a unilayer, fiber-reinforced-composite tension specimen subjected to low-speed loading are established experimentally. The experimental results are used to evaluate the strain distribution throughout the surface of the specimen; to establish the strain concentration at the surface in the neighborhood of broken fibers; and to evaluate other factors.     

Plane steady vibration of an elastic wedge

The problem of plane steady vibration of an elastic wedge of arbitrary angle (less than 180 degrees) subject to harmonic normal and shearing tractions on its faces is reduced to a system of singular integral equations by the superposition of two half-plane solutions. The integral equations have kernels with Cauchy singularities of a non-translation type, except for the 90 degree wedge. The locations of these singularity lines are shown graphically as a function of wedge angle.     

Bond stresses for a composite material reinforced with various arrays of fibers

The problem treated here is that of an isotropic body having a doubly periodic rectangular or triangular array of perfectly bonded circular elastic inclusions. The body is in tension or compression. This simulates a composite material wherein a relatively weak matrix is reinforced by stronger (and more rigid) fibers. Bond stresses for both rectangular and triangular arrays have been calculated using either boundary point matching or boundary point least squares techniques. Numerical results based on a plane strain analysis are given in graphical form.