Investigation of the possible origins of sulfur in 19th century salted paper photographs by x‐ray fluorescence spectroscopy

An X‐ray fluorescence method to determine whether sulfur is present in 19th century photographs due to intentional toning or to environmental deterioration is proposed. In the 19th century salted paper print photographic process, AgCl formed on the surface of a sheet of paper was exposed to sunlight in contact with a negative, leading to the printing out of a Ag image that was fixed by immersing it in a sodium thiosulfate solution or hypo. The improper execution of the fixing in these photographs may result in the presence of sulfur, mostly manifested in image fading, irregular staining, and discoloration. Also, 19th century artists produced salted paper prints with a variety of image tonalities, for example, by using an artificially aged thiosulfate bath. The presence of sulfur in photographs may also be due to sulfur‐containing environmental pollutants. Therefore, knowledge about the location and amounts of sulfur is important to understand the artistic technique and/or the deterioration processes. In this study, the amounts of sulfur and the silver to sulfur signal ratios were determined for a salted paper print made in the laboratory following a 19th century procedure and for two artistic salted paper photographs using X‐ray fluorescence and standards prepared with different amounts of retained hypo and quantified by inductively coupled plasma atomic emission spectroscopy. The amounts of sulfur and the normalized silver to sulfur ratios for the artistic photographs were evaluated based on the results obtained in the samples prepared in the laboratory and in the context of the 19th century practices. Copyright © 2016 John Wiley & Sons, Ltd.     

Hard X‐ray phase‐contrast tomography of non‐homogeneous specimens: grating interferometry versus propagation‐based imaging

X‐ray phase‐contrast imaging is an effective approach to drastically increase the contrast and sensitivity of microtomographic techniques. Numerous approaches to depict the real part of the complex‐valued refractive index of a specimen are nowadays available. A comparative study using experimental data from grating‐based interferometry and propagation‐based phase contrast combined with single‐distance phase retrieval applied to a non‐homogeneous sample is presented (acquired at beamline ID19‐ESRF). It is shown that grating‐based interferometry can handle density gradients in a superior manner. The study underlines the complementarity of the two techniques for practical applications.     

Reproducibility of myelin water fraction analysis: a comparison of region of interest and voxel-based analysis methods

This study compared region of interest (ROI) and voxel-based analysis (VBA) methods to determine the optimal method of myelin water fraction (MWF) analysis. Twenty healthy controls were scanned twice using a multi-echo T₂ relaxation sequence and ROIs were drawn in white and grey matter. MWF was defined as the fractional signal from 15 to 40 ms in the T₂ distribution. For ROI analysis, the mean intensity of voxels within an ROI was fit using non-negative least squares. For VBA, MWF was obtained for each voxel and the mean and median values within an ROI were calculated. There was a slightly higher correlation between Scan 1 and 2 for the VBA method (R²=0.98) relative to the ROI method (R²=0.95), and the VBA mean square difference between scans was 300% lower, indicating VBA was the most consistent between scans. For the VBA method, mean MWF was found to be more reproducible than median MWF. As the VBA method is more reproducible and gives more options for visualization and analysis of MWF, it is recommended over the ROI method of MWF analysis.     

Distributional and Classical Solutions to the Cauchy Boltzmann Problem for Soft Potentials with Integrable Angular Cross Section

This paper focuses on the study of existence and uniqueness of distributional and classical solutions to the Cauchy Boltzmann problem for the soft potential case assuming S ^n?1 integrability of the angular part of the collision kernel (Grad cut-off assumption). For this purpose we revisit the Kaniel–Shinbrot iteration technique to present an elementary proof of existence and uniqueness results that includes the large data near local Maxwellian regime with possibly infinite initial mass. We study the propagation of regularity using a recent estimate for the positive collision operator given in (Alonso et al. in Convolution inequalities for the Boltzmann collision operator. arXiv:0902.0507 [math.AP]) , by E. Carneiro and the authors, that allows us to show such propagation without additional conditions on the collision kernel. Finally, an L ^p -stability result (with 1≤p≤∞) is presented assuming the aforementioned condition.     

Investigation of a Pt–Fe/C catalyst for oxygen reduction reaction in direct ethanol fuel cells

Three cathode catalysts (60% Pt/C, 30% Pt/C and 60% Pt–Fe/C), with a particle size of about 2–3 nm, were prepared to investigate the effect of ethanol cross-over on cathode surfaces. All samples were studied in terms of structure and morphology by using X-ray diffraction (XRD) and transmission electron microscopy (TEM) analyses. Their electrocatalytic behavior in terms of oxygen reduction reaction (ORR) was investigated and compared using a rotating disk electrode (RDE). The tolerance of cathode catalysts in the presence of ethanol was evaluated. The Pt–Fe/C catalyst showed both higher ORR activity and tolerance to ethanol cross-over than Pt/C catalysts. Moreover, the more promising catalysts were tested in 5 cm² DEFC single cells at 60 and 80 °C. An improvement in single cell performance was observed in the presence of the Pt–Fe catalyst, due to an enhancement in the oxygen reduction kinetics. The maximum power density was 53 mW cm⁻² at 2 bar rel. cathode pressure and 80 °C.     

Comparison of Eu(NO<Subscript>3</Subscript>)<Subscript>3</Subscript> and Eu(acac)<Subscript>3</Subscript> precursors for doping luminescent silica nanoparticles

In this study, we report the comparison between Eu³⁺-doped silica nanoparticles synthesized by Stöber method using Eu(NO₃)₃ or Eu(acac)₃ as precursors. The impact of different europium species on the properties of the final silica nanospheres is investigated in details in terms of size, morphology, reachable doping amount, and luminescence efficiency. Moreover, the results obtained for different thermal treatments are presented and discussed. It is shown that the organic complex modify the silica growing process, leading to bigger and irregular nanoparticles (500–800 nm) with respect to the perfectly spherical ones (400 nm) obtained by the nitrate salt, but their luminescence intensity and lifetime is significantly higher when 800–900 °C annealing is performed.     

Effect of chitosan and thiolated chitosan coating on the inhibition behaviour of PIBCA nanoparticles against intestinal metallopeptidases

Surface modified nanoparticles composed of poly(isobutylcyanoacrylate) (PIBCA) cores surrounded by a chitosan and thiolated chitosan gel layer were prepared and characterized in previous works. The presence of such biopolymers on the nanoparticle surface conferred those nanosystems interesting characteristics that might partially overcome the gastrointestinal enzymatic barrier, improving the oral administration of pharmacologically active peptides. In the present work, the antiprotease behaviour of this family of core–shell nanoparticles was in vitro tested against two model metallopeptidases present in the gastrointestinal tract (GIT): Carboxypeptidase A -CP A- (luminal protease) and Leucine Aminopeptidase M -LAP M- (membrane protease). As previous step, the zinc-binding capacity of these nanoparticles was evaluated. Interestingly, an improvement of both the zinc-binding capacity and the antiprotease effect of chitosan was observed when the biopolymers (chitosan and thiolated chitosan) were used as coating component of the core–shell nanoparticles, in comparison with their behaviour in solution, thanks to the different biopolymer chains rearrangement. The presence of amino, hydroxyl and thiol groups on the nanoparticle surface promoted zinc binding and hence the inhibition of the metallopeptidases analysed. On the contrary, the occurrence of a cross-linked structure in the gel layer surrounding the PIBCA cores of thiolated formulations, due to the formation of interchain and intrachain disulphide bonds, partially limited the inhibition of the proteases. The low accessibility of cations to the active groups of the cross-linked polymeric shell was postulated as a possible explanation of this behaviour. Results obtained in this work make this family of surface-modified nanocarriers promising candidates for the successfull administration of pharmacologically active peptides and proteins by the oral route.     

Phase Transfer Promoted Ruthenium Oxide Oxidations of Carbohydrates II

ABSTRACT

The use of a phase transfer catalyst, benzyltriethylammonium chloride (BTEAC), is described in conjunction with the ruthenium dioxide/periodate : water/chloroform system for the oxidation of carbohydrate alcohols to the corresponding ketone, aldehyde, or carboxylic acid. The method was found to be applicable to carbohydrates appropriately protected as acetals, ethers, or containing a benzoyloxy group not positioned to readily undergo β-elimination. While the method was very suitable for the oxidation of carbohydrate secondary alcohols to ketones, it was found to be less suitable for the oxidation of a carbohydrate primary alcohol to the corresponding aldehyde or carboxylic acid. Evidence presented suggests that under the mildly basic conditions of the reaction, ruthenium tetraoxide is converted to ruthenate and perruthenate ions in the aqueous solution and then the perruthenate ion is carried by the phase transfer catalyst into the organic layer where oxidation of the substrate occurs. A number of examples illustrating the scope of the method are presented.