Synthesis of bisimines of pyrene and dibenz[a,h]anthracene

The preparation of 3b,4a,7b,8a-tetrahydro-4H,8H-pyreno[4,5-b:9,10-b']bisazirine and of 1a,6b,7a,12b-tetrahydro-1H,7H-dibenz[3,4:7,8]anthra[1,2-b:5,6-b']bisazirine is described. The corresponding diepoxides were reacted with sodium azide in aqueous acetone and the mixtures of trans-azido alcohols, so formed, were cyclized by tri-n-butylphosphine.     

Substituent-controlled photoisomerization in retinal chromophore models: Fluorinated and methoxy-substituted protonated Schiff bases

The effect of substitution on the intrinsic (i.e. in vacuo) photoisomerization ability of retinal chromophore models has been explored using CASPT2//CASSCF minimum energy path computations to map the S₁ photoisomerization paths of two substituted minimal models of the retinal chromophore: the 2-cis-penta-2,4-dieniminium and the all-trans-epta-2,4,6-trieniminium cations, which have been modified using fluorine or methoxyl substituents as representative examples of electron-withdrawing and electron-releasing groups, respectively. A systematic analysis has been performed involving substitutions in all the possible positions along the chain. It is shown that the photochemical reactivity and photoisomerization efficiency of these systems may be tuned or indeed changed, although this effect strongly depends on the position of the substituent. In particular, we have shown that (i) most of the systems preserves qualitatively the reactivity of the parent (i.e. unsubstituted) compound; (ii) substitution at positions C4 or C6 leads to a different relaxed excited state structure of the chromophore and in general to a very flat photoisomerization path (or to a tiny S₁ energy barrier in some cases); (iii) the nature of the TICT state (i.e. the S₁ → S₀ decay funnel) may be turned from a conical intersection into an excited state minimum; (iv) for the C4 methoxy-substituted system the isomerization path as well as the S₁/S₀ decay funnel involve an unusual torsional angle. Thus, substitution turns out to be a good tool not only to tune the optical properties (i.e. the absorption and emission features) of the chromophore (as we have already shown in a previous work: I. Conti, F. Bernardi, G. Orlandi, M. Garavelli, Mol. Phys. 104 (2006) 915–924), but it may also play a crucial role in tuning and controlling photoisomerization selectivity and efficiency, affecting excited state lifetime and reaction rate. A rationale for these effects is presented, which provides a basis for understanding reactivity properties and the intrinsic photochemical behavior of substituted retinal chromophores.     

On a Volume‐Constrained Variational Problem

. Existence of minimizers for a volume-constrained energy $ E(u) := \int_{\Omega} W(\nabla u)\, dx Existence of minimizers for a volume-constrained energy E(u) : = ò_W W(?u) dx E(u) := \int_{\Omega} W(\nabla u)\, dx where L^N({u = z_i}) = a_i, i = 1, ?, P, {\cal L}^N(\{u = z_i\}) = \alpha_i, i = 1, \ldots, P, is proved for the case in which z_iz_i are extremal points of a compact, convex set in \Bbb R^d\Bbb R^d and under suitable assumptions on a class of quasiconvex energy densities W. Optimality properties are studied in the scalar-valued problem where d=1d=1, P=2P=2, W(x)=|x|²W(\xi)=|\xi|^2, and the &-limit as the sum of the measures of the 2 phases tends to \L(W)\L(\Omega) is identified. Minimizers are fully characterized when N=1N=1, and candidates for solutions are studied for the circle and the square in the plane.     

Novel antibiotics: second generation macrocyclic peptides designed to trap Holliday junctions

Described are the syntheses of 15 macrocyclic peptides designed to trap Holliday junctions (HJs) in bacteria during site-specific and homologous recombination. This leads to inhibiting bacterial growth. These second generation macrocycles were based on the C-2 symmetrical HJ. They were synthesized using a strategy that permits elucidation of the amino acid role in binding HJs. The syntheses of these macrocycles are an important step in the development of a new class of antibiotics.     

Coordination Compounds of Palladium(II) and 4‐Amino‐1,2,4‐triazole

Mononuclear coordination compounds of the type [Pd(NH₂trz)₄]²⁺ with the counterions chloride, nitrate, trifluoromethanesulfonate, and methanesulfonate were synthesized and their structures identified with single‐crystal X‐ray diffraction. In case of the synthesis with methanesulfonate as the counterion the dominant product was of the generic formula [Pd₂(NH₂trz)₃](CH₃SO₃)₄, and the complex [Pd(NH₂trz)₄](CH₃SO₃)₂ only emerged as a byproduct. While the structure of the byproduct could be analyzed by single‐crystal X‐ray diffraction, suitable crystals of the main product [Pd₂(NH₂trz)₃](CH₃SO₃)₄ could not be obtained. However, stoichiometry implies a polynuclear nature with NH₂trz present in the rare μ₃‐η¹:η¹:η¹ coordination type, i.e. with NH₂trz molecules coordinating to three palladium atoms. Accordingly, identification of solids by single‐crystal analysis alone can be misleading in particular with NH₂trz as a ligand due to its versatile coordination behavior. Finally, analysis by differential scanning calorimetry (DSC) revealed that the complexes were thermally stable (the onset of decomposition well above 100 °C), with [Pd₂(NH₂trz)₃](CH₃SO₃)₄ being the most stable compound (onset of decomposition at 204 °C).     

Über ebene affine Inzidenzgruppen

For a translation plane P with respect to f we consider the group of collineations generated by all elations fixing f and a point F of f. All subgroups or are determined which operate regularly on the points of the affine plane P. Group-theoretic and operating properties of the groups are stated especially for the finite and the Desarguesian cases. In the latter case the companion NL-near modules are constructed. Finally we characterize the groups within PGL(3, K) with commutative field K of finite characteristic.     

New N6‐substituted 8‐alkyl‐2‐phenylmethylsulfanyl‐adenines. II

Title compounds bearing substituents on C(2), C(6) and C(8) were prepared from a newly synthesized pyrimidine derivative 11. The new pyrimidine 11 was generated from compound 2 through two different synthetic schemes. In one pathway, compound 2 was nitrosated, reduced and alkylated to produce com pounds 9 , 10 and 11 respectively (Scheme). In an alternate route using compound 2 as the starting material, a coupling reaction using the diazonium salt derived from p‐methylaniline afforded the azo derivative 7 , which was subsequently alkylated and reductively cleaved to form compounds 8 and 11 respectively (See Scheme). Compound 11 was annulated to the corresponding hypoxanthine derivatives 12–14 ; compounds 12 and 13 were chlorinated with phosphorus oxychloride, then reacted with amines to yield compound 17 and 20 respectively. Compounds 21 , 22 and 23 were obtained by oxidation of the corresponding sulfide as depicted in Scheme. Alkylation of the thiol function of 1 gave a mixture of 3 and 4. Compound 3 was chlo rinated to 5. Nitration of 5 resulted in electrophilic aromatic substitution of the aryl ring and concomitant oxidation of the sulfide to the sulfoxide, producing 6.     

Direct 23Na NMR observation of mixed cations residing inside a G-quadruplex channel

We report direct (23)Na NMR observation for the presence of mixed cations (Na(+)/K(+), Na(+)/Rb(+), Na(+)/Sr(2+)) inside the G-quadruplex channel formed by the self-association of guanosine 5'-monophosphate at pH 8.     

New 4-(benzotriazol-1-yl)-1,2,3-triazole derivatives

A new 4-(benzotriazol-1-yl)-1,2,3-triazole structure was obtained by the diazotization reaction of either of 1-(2-aminophenyl)-4-carboxamido-5-amino-1H-1,2,3-triazole ( 1c ) or of the corresponding Dimroth isomer 1d . It underwent some common reactions to evaluate its chemical behaviour and structure. An analogous reaction sequence was carried out from the 2-nitro-4-methylphenyl azide, to assign the structure to the nitro derivatives prepared. The structure of the new compounds prepared was confirmed by chemical and spectroscopic methods.     

The Surface Energy of MgO: Multiscale Reconstruction from Thermal Groove Geometry

The surface energy of MgO is determined using experimental data collected from equilibrated thermal grooves circumscribing island grains. Local equilibrium assumptions at each groove require that the Herring equations be satisfied at each data site, thereby yielding a large and overdetermined system of equations involving the surface energy . This inverse problem is then solved using a new technique that is statistical in nature and multiscale in implementation. The resulting discrete solution represents a statistically significant representation of the surface energy of MgO as a function of surface orientation. Comparisons to results derived from a more traditional approach, along with suggested further applications, are discussed.