Synthesis and characterization of a new porphyrin-polyoxometalate hybrid material and investigation of its catalytic activity

In the present work, the preparation of a new organic-inorganic hybrid material in which tetrakis(p-aminophenylporphyrin) is covalently linked to a Lindqvist structure of polyoxometalate, is reported. This new porphyrin-polyoxometalate hybrid material was characterized by (1)H NMR, FT-IR and UV-Vis spectroscopic methods and cyclic voltammetry. These spectro- and electrochemical studies provided spectral data of the synthesis of this compound. Cyclic voltammetry showed the influence of the porphyrin on the redox process of the polyoxometalate. The catalytic activity of this hybrid material was investigated in the alkene epoxidation with NaIO(4).     

On the solution of the integro-differential equation with an integral boundary condition

In this paper, we present an existence of solution for a functional integro-differential equation with an integral boundary condition arising in chemical engineering, underground water flow and population dynamics, and other field of physics and mathematical chemistry. By using the techniques of noncompactness measures, we employ the basic fixed point theorems such as Darbo’s theorem to obtain the mentioned aim in Banach algebra. Then this paper presents a powerful numerical approach based on Sinc approximation to solve the equation. Then convergence of this technique is discussed by preparing a theorem which shows exponential type convergence rate and guarantees the applicability of that. Finally, some numerical examples are given to confirm efficiency and accuracy of the numerical scheme.     

Effect of deposition method on the optical and microstructural properties of vacuum-deposited MgF2 thin films

The optical and structural properties of magnesium fluoride films deposited by conventional e-beam evaporation and sputtering have been investigated herein. Deposition processes were carried out on the glass substrates in the absence of any reactive gases. The results show that the deposition method has a considerable effect on the optical and microstructural properties MgF₂ film. Also, the results show that the deposition parameters of the sputtered MgF₂ films can be easily controlled to yield the desired layer. The optical, chemical, and structural properties of the deposited MgF₂ films were characterized by using spectrophotometer, X-ray photoelectron spectroscopy, X-ray diffraction, scanning electron microscopy, and atomic force microscopy.     

A simple one-step synthesis of 3-amino-2,4(1H,3H)quinazolinediones

Anthranilic acids and alkyl carbazates in refluxing quinoline give high yields of 3-arnino-2,4(1H,3H)-quinazolinediones.     

[Mn(TPPS)] immobilized on ionic liquid-modified silica as a heterogeneous and reusable catalyst for epoxidation of alkenes with NaIO<Subscript>4</Subscript> under ultrasonic irradiation

Effective epoxidation of alkenes using sodium periodate was accomplished with Manganese (III) tetrakis(p-sulfonatophenyl)porphyrin, [C₄₄H₂₆N₄O₁₂S₄Na₄], supported on ionic liquids-modified silica, Im-SiO₂, under ultrasonic irradiation conditions is reported. This heterogeneous catalyst, [Mn(TPPS)@SiO₂-Im] was characterized by elemental analysis, scanning electron microscopy (SEM), FT-IR and UV–Vis spectroscopic methods. The synthesized hybrid catalyst was applied for efficient epoxidation of various alkenes with sodium periodate in acetonitrile under ultrasonic irradiation conditions. This solid catalyst can be easily recovered by simple filtration and reused several time without apparent loss of its catalytic activity.     

Graphene oxide nanosheets supported manganese(III) porphyrin: a highly efficient and reusable biomimetic catalyst for epoxidation of alkenes with sodium periodate

Efficient epoxidation of alkenes catalyzed by tetrakis(p-aminophenyl)porphyrinatomanganese(III) chloride, [Mn(TNH₂PP)Cl], supported on graphene oxide nanosheets, is reported. The catalyst, [Mn(TNH₂PP)Cl]@GO, was prepared by covalent attachment of amino groups of porphyrin to carboxylic acid groups of GO. This new heterogenized catalyst was characterized by ICP, FT-IR and diffuse reflectance UV–vis spectroscopies, scanning electron microscopy and transmission electron microscopy. This catalyst was applied as an efficient and reusable catalyst in the epoxidation of alkenes with NaIO₄ at room temperature, in the presence of imidazole as axial ligand. The most noteworthy advantage of [Mn(TNH₂PP)Cl]@GO is its high reusability in the oxidation reactions, in which the catalyst was reused several times without significant loss of its catalytic activity.     

Chemical Composition,Apoptotic Activity,and Antiparasitic Effects of Ferula macrecolea Essential Oil against Echinococcus granulosus Protoscoleces

Background: Today, the present protoscolicidals used to minimize the serious risks during hydatid cyst surgery are not completely safe and have various adverse side effects. The present study aimed to evaluate the chemical composition and apoptotic activity of Ferula macrecolea essential oil (FMEO) as well as its in vitro and ex vivo protoscolicidal effects against hydatid cyst protoscoleces. Methods: Gas chromatography/mass spectrometry (GC/MS) analysis was performed to determine the chemical composition of FMEO. Protoscoleces of hydatid cysts were collected from liver fertile hydatid cysts of infected sheep and were then treated with various concentrations of the essential oil (75, 150, and 300 µL/mL) for 5–60 min in vitro and ex vivo. Then, by using the eosin exclusion test, the viability of the protoscoleces was studied. The caspase-3-like activity of the FMEO-treated protoscoleces was also evaluated through the colorimetric protease assay Sigma Kit based on the manufacturer’s instructions. Results: According to GC/MS, the main constituents of the essential oil were terpinolene (77.72%), n-nonanal (4.47%), and linalool (4.35%), respectively. In vitro, the maximum protoscolicidal activity of FMEO was observed at the concentrations of 150 and 300 µL/mL, such that 100% of the protoscoleces were killed after 30 and 20 min of exposure, respectively. Based on the obtained findings, the results demonstrate that FMEO required a longer time to kill protoscoleces ex vivo; after 12 min of exposure to FMEO, only 13.4% of the protoscoleces remained alive. After 48 h of the treatment of protoscoleces, FMEO, in a dose-dependent manner and at doses of 75, 150, and 300 µL/mL, induced the activation of the caspase enzyme by 24.3, 35.3, and 48.3%, respectively. Conclusions: Our findings demonstrate the potent protoscolicidal effects of FMEO in vitro and ex vivo; however, further studies are required to assess the safety and the efficiency of FMEO as a promising scolicidal agent in a preclinical model and clinical setting.     

Rapid and highly efficient trimethylsilylation of alcohols and phenols with hexamethyldisilazane (HMDS) catalyzed by reusable zirconyl triflate, [ZrO(OTf)2]

In this paper, rapid and efficient trimethylsilylation of alcohols and phenols with hexamethyldisilazane in the presence of catalytic amounts of ZrO(OTf)₂ is reported. Primary, secondary and tertiary alcohols as well as phenols were efficiently converted to their corresponding TMS ethers in short reaction times at room temperature. It is noteworthy that this method can be used for chemoselective silylation of primary alcohols in the presence of secondary and tertiary alcohols and phenols.     

Sucrose-based epoxy monomers and their reactions with diethylenetriamine

Two sets of sucrose-based epoxy monomers, namely, epoxy allyl sucroses (EAS), and epoxy crotyl sucroses (ECS), were prepared by epoxidation of octa-O-allyl and octa-O-crotyl sucroses (OAS and OCS, respectively). Synthetic and structural characterization studies showed that the new epoxy monomers were mixtures of structural isomers and diastereoisomers that contained varying numbers of epoxy groups per sucrose. EAS and ECS can be tailored to contain an average of one to eight epoxy groups per sucrose. Quantitative ¹³C-NMR spectrometry and titrimetry were used independently to confirm the average number of epoxy groups per sucrose. Sucrose-based epoxy monomers were cured with diethylenetriamine (DETA) in a differential scanning calorimeter (DSC), and their curing characteristics were compared with those of diglycidyl ether of bisphenol A (DGEBA) and diepoxycrotyl ether of bisphenol A (DECEBA). EAS and DGEBA cured at 100 to 125°C and exhibited a heat of cure of about 108.8 kJ per mol epoxy. ECS and DECEBA cured at 150 and 171°C, respectively, and exhibited a heat of cure of about 83.7 kJ per mol epoxy. Depending upon the degree of epoxidation (average number of epoxy groups per sucrose) and the concentration of DETA, glass transition temperatures (T_gs) of cured EAS varied from −17 to 72°C. DETA-cured ECS containing an average of 7.3 epoxy groups per sucrose (ECS-7.3) showed no DSC glass transition between −140 and 220°C when the ratio of amine (NH) to epoxy group was 1:1 and 1.5:1. Maximum T_gs obtained for DETA-cured DGEBA and DECEBA polymers were 134 and 106°C, respectively. DETA-cured bisphenol A-based epoxy polymers degraded at about 340°C, as observed by thermogravimetric analysis (TGA). DETA-cured sucrose-based epoxy polymers degraded at about 320°C. Sucrose-based epoxies cured with DETA were found to bind aluminum, glass, and steel. Comparative lap shear tests (ASTM D1002–94) showed that DETA-cured epoxy allyl sucroses with an average of 3.2 epoxy groups per sucrose (EAS-3.2) generated a flexible adhesive comparable in bond strength to DGEBA. However, DETA-cured ECS-7.3 outperformed the bonding characteristics of both DGEBA and EAS-3.2. All sucrose-based epoxy polymers were crosslinked and insoluble in water, N,N-dimethylformamide, tetrahydrofuran, acetone, and dichloromethane. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2397–2413, 1998