Facile Fabrication of Concentrated Polymer Brushes with Complex Patterning by Photocontrolled Organocatalyzed Living Radical Polymerization

Photocontrolled surface‐initiated reversible complexation mediated polymerization (photo‐SI‐RCMP) was successfully applied to fabricate concentrated polymer brushes with complex patterning structures. Positive‐type patterned polymer brushes were obtained by photo‐SI‐RCMP under visible light (550(±50) nm) using photomasks. A particularly interesting finding was that negative‐type patterned polymer brushes were also obtainable in a facile manner. A nonspecial UV light (250–385 nm) enabled the preparation of pre‐patterned initiator surfaces in a remarkably short time (1 min), leading to negative‐type patterned polymer brushes. Based on this unique selectivity between visible and UV light, the combination of two patterning techniques enabled the preparation of complex patterned brushes, including diblock copolymers, binary polymers, and functional binary polymers, without multistep immobilization of one or more initiators on the surfaces.     

Analysis of the dipole simulation method for two-dimensional Dirichlet problems in Jordan regions with analytic boundaries

This paper presents a stability and error estimate of the dipole simulation method applied to Dirichlet problems in Jordan regions. Specifically, it is proved that the error decays exponentially when the boundary data is analytic, and it decays algebraically when the boundary data is not analytic but belongs to some Sobolev space. Moreover, some numerical results and conjectures are presented.     

Visualization of flapping wing of the drone beetle

Investigation of flapping wings of insect are focused on low Reynolds number effect and the unsteady aerodynamic properties. Interaction between flapping wing of insects and the air flow became one of important and fundamental research topics in micro air vehicle. The present work is aim to investigate the flow behavior of flapping wings of tethered scarab beetle. The generation mechanisms of velocity field and vortex formation are visualized with smoke-wire method. Tethered flight of the drone beetle shows the motion with elastic deformation of flapping wing. Measured flapping frequency is about 71 Hz and its frequency is higher than for dragonfly and butterfly. Beetle decreases negative lift by feathering motion in the upstroke process and increase positive lift by effect of wake capture in the downstroke process.     

Synthesis of (zinc(II) phthalocyanine)-containing cellulose derivative using phthalocyanine-ring formation reaction

2,3-Di-O-myristyl-6-O-(zinc(II) phthalocyaninyl) cellulose (5) was synthesized from cellulose (1) by five reaction steps via 6-O-(3′,4′-dicyanophenyl)-2,3-di-O-myristyl cellulose (4). The key reaction was phthalocyanine-ring formation on a cellulose backbone, that is, the reaction of compound 4 with o-phthalodinitrile in the presence of hexamethyldisilazane and zinc acetate in DMF afforded to compound 5 in 35.4 % yield. Consequently, the degree of substitution with phthalocyanine moieties of compound 5 was 0.38. The LB monolayer film of compound 5 on an indium tin oxide (ITO) electrode was found to show photocurrent generation performance at 680 nm.     

MOVPE growth of nonpolar a-plane GaN with low oxygen contamination and specular surface on a freestanding GaN substrate

We investigated unintentionally doped nonpolar a- and m-plane GaN layers grown by metalorganic vapor phase epitaxy under several sets of conditions on freestanding a- and m-plane GaN substrates. Oxygen contamination in a-plane GaN is greatly reduced by increasing the V/III ratio during growth. As a result, a high-resistivity GaN buffer layer for an AlGaN/GaN heterostructure field-effect transistor was realized.     

Chiroptical properties of an alternatingly functionalized cellotriose bearing two porphyrin groups

Right-handedness derived from bisporphyrins attached to a cellotriose backbone at O-6 and O'-6 positions is revealed for the first time. This cellotriose is proposed as a model of alternatingly functionalized cellulosics, which have promising properties for applications in optoelectronics and molecular receptors owing to the chirality and rigid backbone effects.     

Oxidation of 7,8‐diaminotheophylline with lead tetraacetate and reaction of the oxidation product, 6‐cyanoimino‐5‐diazo‐1,3‐dimethylpyrimidine‐2,4‐dione with alcohols or amines

Oxidation of 7,8‐diaminotheophylline (1) with lead tetraacetate in refluxing toluene gave a mixture of 3‐amino‐5,7‐dimethylpyrimido[4,5‐e][1,2,4]triazine‐6,8‐dione ( 2 ) and 6‐cyanoimino‐5‐diazo‐1,3‐dimethylpyrimidine‐2,4‐dione ( 4 ). The latter was transformed to 2 by the reaction with 1‐propanethiol in quantitative yield. The reaction of 4 with methanol, ethanol and 1‐propanol in the presence of rhodium ( II ) acetate gave 5‐alkoxy‐6‐(2‐alkyl‐3‐isoureido)‐1,3‐dimethylpyrimidine‐2,4‐diones ( 7a‐c ). A similar reaction of 4 with alkylamines such as n‐propylamine, n‐butylamine, isobutylamine and n‐hexylamine gave a mixture of 7‐alkyl‐8‐aminotheophyllines ( 8a‐d ) and (5‐alkylamino‐1,3‐dimethyl‐2,4‐dioxopyrimidin‐6‐yl)cyanamides ( 9a‐d ).     

First Cellulose Langmuir‐Blodgett Films towards Photocurrent Generation Systems

Langmuir‐Blodgett films of a cellulose derivative containing porphyrins, porphyrin‐cellulose, were fabricated in order to construct a cellulose‐based molecular photocurrent generation system. On visible light illumination of the LB monolayer film deposited on an ITO electrode, anodic photocurrents were observed with a quantum yield of 1.6% at an applied potential of 0 V versus SCE, and 3.8–4.6% at 0.2–0.3 V versus SCE. These values indicate that the self‐quenching of the photoexcited porphyrins in the cellulose LB film was suppressed, while porphyrin moieties in the LB film had a densely packed structure. This is because the porphyrins are located at a distance of approximately 1.0 nm along the cellulose backbone.

     

Infrared seed inspection system (IRSIS) on painted car shells

This paper describes a newly-developed automated thermal system for detection of seeds on newly painted car shells. The system’s novel approach is to use thermal emission; previously applied techniques relied on light reflection strategies. The system is described beginning with analytical modeling of the underlying detection theory to verification on a pilot run in an automotive production line. Parker’s flash procedure, using a thermal detector, was performed to extract the thermal properties of inspected panels. New computer logic developed in-house for processing the acquired thermograms is also presented.