Amine oxidase amperometric biosensor coupled to liquid chromatography for biogenic amines determination

A selective and sensitive method is presented for biogenic amines (BA) determination. The novelty consists in coupling a highly selective electrochemical biosensor to a weak acid cation-exchange column for online detection of amines. A bienzyme design, based on a recently isolated amine oxidase from grass pea and commercial horseradish peroxidase, was used for the biosensor construction. The enzymes were co-immobilized on the surface of a graphite electrode together with the electrochemical mediator (Os-redox polymer). The electrochemical detection was performed at a low applied potential (?50 mV vs. Ag/AgCl, KCl_0.1 M), where biases from interferences are minimal. The separation and determination of six BA, with relevance in food analysis (tyramine, putrescine, cadaverine, histamine, agmatine and spermidine), were investigated. Irrespective of the BA nature, the amine oxidase-based biosensor showed a linear response up to 5 mM, and its sensitivity decreases in the following order: cadaverine, putrescine, spermidine, agmatine, histamine and tyramine. The approach was used to estimate the BA content in fish samples, after their extraction with methanesulfonic acid.     

Per-O-methylation of neutral carbohydrates directly from aqueous samples for gas chromatography and mass spectrometry analysis

Per-O-methylation of neutral carbohydrates in one step by adding dimethyl sulfoxide, powdered sodium hydroxide, and methyl iodide directly to aqueous sample is described. The influence of the water on the methylation reaction is investigated. Solid powdered sodium hydroxide is very hygroscopic and can scavenge the water from sample if an additional excess of sodium hydroxide is added. The degree of per-O-methylation of carbohydrates is checked by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. Gas chromatography-mass spectrometry analysis of mono- and disaccharides from grape juice is presented.     

Economic Cycles of Carnot Type

Originally, the Carnot cycle was a theoretical thermodynamic cycle that provided an upper limit on the efficiency that any classical thermodynamic engine can achieve during the conversion of heat into work, or conversely, the efficiency of a refrigeration system in creating a temperature difference by the application of work to the system. The first aim of this paper is to introduce and study the economic Carnot cycles concerning Roegenian economics, using our thermodynamic–economic dictionary. These cycles are described in both a Q−P diagram and a E−I diagram. An economic Carnot cycle has a maximum efficiency for a reversible economic “engine”. Three problems together with their solutions clarify the meaning of the economic Carnot cycle, in our context. Then we transform the ideal gas theory into the ideal income theory. The second aim is to analyze the economic Van der Waals equation, showing that the diffeomorphic-invariant information about the Van der Waals surface can be obtained by examining a cuspidal potential.     

Conformational changes of strong polycations in the presence of divalent counterions and their influence upon the flocculation efficiency

The interaction between strong polycations, which possess the ammonium quaternary centers attached to an acrylic macromolecular chain derived from poly(N,N-dimethylaminoethyl methacrylate) (polycations Q_x), and divalent counterions was investigated by viscometry and turbidimetry. Conformational changes of polycations were influenced by the polycation charge density, counterion nature (SO₄²⁻ or S₂O₈²⁻) and concentration. The morphology of the polycation layers deposited onto silicon wafers has been studied by tapping mode atomic force microscopy, a strong influence of the polycation and ammonium persulfate concentration on the surface topography being observed. The optimum flocculation concentration of polycation decreased and the flocculation window increased in the presence of S₂O₈²⁻, in the destabilization of kaolin model dispersion. Removal of Congo Red from aqueous solution by the complex system formed between polycations and divalent counterions was also investigated. The behavior of polycations Q_x in separation processes was compared with that of one polycation containing 95 mol% N,N-dimethyl-2-hydroxypropyleneammonium chloride units in the backbone (PCA₅).     

BaTiO3 and PbTiO3 perovskite as catalysts for methane combustion

Unsupported and γ-Al₂O₃-supported Ba and Pb titanate catalysts were prepared, characterized and studied in the combustion of methane, as a test reaction for VOCs’ catalytic combustion. They present good catalytic activities, and after dispersion (5%) on γ-Al₂O₃ the specific activity of the supported perovskite phase increased 25 and 30 times, respectively, compared with the unsupported samples. PbTiO₃/γ-Al₂O₃ shows the best catalytic properties among the tested samples.     

Supramolecular Systems from Natural Polymers and Maleic Polyelectrolytes

Summary: The formation of polyelectrolyte complexes by interaction between chitosan and maleic acid copolymers as strong/weak dibasic polyanions was investigated. The interaction between the sodium salt of maleic acid copolymers with styrene or vinyl acetate and the chitosan hydrochloride in aqueous solution was followed by potentiometric, conductometric and turbidimetric titration. The effect of the added low molecular salt on the complex formation was also investigated. The precipitated complexes were analyzed by FTIR spectroscopy and TG analysis. Preliminary layer-by-layer deposition experiments were performed to obtain thin films.     

Polysilanes. A New Route Toward High Performance EL Devices

The discovery of a remarkable class of plastics that can conduct electricity has opened a new era of plastics science and technology that has just been recognized by the award of the 2000 Nobel prize for chemistry. They can be used to make a wide range of electronic devices such as transistors, light-emitting diodes, solar cells and even lasers, through much simpler manufacture than conventional inorganic materials, increasing flexibility, reducing cost, and opening up new markets. Polysilanes are subject of an intensive research work aiming to various optoelectronic applications. Through this work the chemical structure of polydiphenylsilane was modified to obtain both solubility in common solvents and to induce new properties by attaching of various organic segments.     

Biotinylated chitosan-based SPIONs with potential in blood-contacting applications

Haemocompatible biotinylated superparamagnetic nanoparticles (size range 300–700 nm) have been obtained by coating magnetite through ionic gelation with a mixture of chitosan and sodium tripolyphosphate, followed by subsequent functionalisation with biotin. The evaluations of their magnetic properties together with haemocompatibility tests have shown that these nanoparticles exhibit the prerequisite behaviour for use in magnetic field–assisted separations within biological systems.     

Influence of the heat treatment conditions on the formation of CuFe2O4 from mechanical milled precursors oxides

Stoichiometric mixture of CuO and ??-Fe₂O₃ milled in air up to 30?h was subjected to different heat treatments. The evolution of the heat treated milled powders was investigated by X-ray diffraction (XRD). The CuFe₂O₄ was partially obtained by milling, the material consisting in a mixture of phases. By applying different heat treatments in air and in vacuum, for 2?C6?h, in 500?C800?°C temperature range the phases composition of the milled samples is changed. A heat treatment at 500?°C in vacuum favours the formation of delafossite (CuFeO₂) and tenorite (CuO) phases. If the same heat treatment is made in air, the CuFe₂O₄ phase formation with a cubic structure is favoured. Differential scanning calorimetry (DSC) investigation realised in Ar atmosphere revealed two large exothermic peaks. The first one is associated with the formation of the delafossite and tenorite phases and the second one with the formation of CuFe₂O₄. The XRD patterns of the samples subjected to the DSC measurements present maxima corresponding to the delafossite and cuprospinel (CuFe₂O₄) phases. For the heat treatment at 600?°C in air the phases present in the sample are the same as for the annealing performed at 500?°C: CuFe₂O₄, ??-Fe₂O₃ and CuO. The heat treatment in air at 800?°C leads to the complete reaction between the different phases and the formation of CuFe₂O₄ phase in whole the sample volume. The CuFe₂O₄ ferrite crystallises after this heat treatment in two crystal systems: cubic and tetragonal.