Use of novel cardanol-porphyrin hybrids and their TiO₂-based composites for the photodegradation of 4-nitrophenol in water

Cardanol, a well known hazardous byproduct of the cashew industry, has been used as starting material for the synthesis of useful differently substituted "cardanol-based" porphyrins and their zinc(II), copper(II), cobalt(II) and Fe(III) complexes. Novel composites prepared by impregnation of polycrystalline TiO? powder with an opportune amount of "cardanol-based" porphyrins, which act as sensitizers for the improvement of the photo-catalytic activity of the bare TiO?, have been used in the photodegradation in water of 4-nitrophenol (4-NP), which is a toxic and bio-refractory pollutant, dangerous for ecosystems and human health.     

Sol–gel preparation of pure and doped TiO2 films for the photocatalytic oxidation of ethanol in air

Stable sols of TiO₂ were synthesized by a non-aqueous sol–gel process using titanium (IV) isopropoxide as precursor. The microstructure, optical and morphological properties of the films obtained by spin-coating from the sol, and annealed at different temperatures, were investigated using scanning electron microscopy, transmission electron microscopy, diffuse reflectance spectroscopy and ellipsometry. The crystalline structure of the films was characterized by X-ray diffraction and their photocatalytic activity was evaluated for the oxidation of ethanol in air. The influence of the calcination temperature, pre-heat treatment and the number of layers was studied. Simultaneous thermo-gravimetric and differential thermal analysis measurements were carried out to ascertain the thermal decomposition behavior of the precursors. In order to obtain a higher photoresponse in the visible region, a series of vanadium-, niobium- and tantalum-doped TiO₂ catalysts was synthesized by the same sol–gel method. For V doping two different precursors, a vanadium alkoxide and V₂O₅, were used. The effect on the crystallization and photocatalytic activity of the doped TiO₂ films was investigated. Furthermore, to identify the effective composition of the samples, they were characterized by X-ray photoelectron spectroscopy and the surface area of the powders was measured by N₂ adsorption. The 10 wt.% doped catalysts exhibit high photocatalytic activity under visible light and among them the best performance was obtained for the sample containing Ta as dopant. The crystallite sizes are closely related to the photocatalytic activity.     

Gold nanoparticles in an ionic liquid phase supported in a biopolymeric matrix applied in the development of a rosmarinic acid biosensor

Gold nanoparticles dispersed in 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid (Au-BMI·PF(6)) were supported in chitin (CTN) chemically crosslinked with glyoxal and epichlorohydrin to obtain a new supported ionic liquid phase (SILP) catalyst with high catalytic activity, and providing an excellent environment for enzyme immobilization. This modified biopolymer matrix (Au-BMI·PF(6)-CTN) was used as a support for the immobilization of the enzyme peroxidase (PER) from pea (Pisum sativum), and employed to develop a new biosensor for rosmarinic acid (RA) determination in pharmaceutical samples by square-wave voltammetry. In the presence of hydrogen peroxide, the PER catalyzes the oxidation of RA to the corresponding o-quinone, which is electrochemically reduced at a potential of +0.14 V vs. Ag/AgCl. Under optimized conditions, the resulting peak current increased linearly for the RA concentration range of 0.50 to 23.70 μM with a detection limit of 70.09 nM. The biosensor demonstrated high sensitivity, good repeatability and reproducibility, and long-term stability (15% decrease in response over 120 days). The method was successfully applied to the determination of RA content in pharmaceutical samples, with recovery values being in the range of 98.3 to 106.2%. The efficient analytical performance of the proposed biosensor can be attributed to the effective immobilization of the PER enzyme in the modified CTN matrix, the significant contribution of the high conductivity of the ionic liquid, the facilitation of electron transfer promoted by gold nanoparticles, and the inherent catalytic ability of these materials.     

Formation and decomposition of N‐alkylnaphthalimides: experimental evidences and ab initio description of the reaction pathways

The kinetics of hydrolysis of 1,8‐N‐butyl‐naphthalimide (1,8‐NBN) to 1,8‐N‐butyl‐naphthalamide (1,8‐NBAmide) and of 2,3‐N‐butyl‐naphthalimide (2,3‐NBN) to 2,3‐N‐butyl‐naphthalamide (2,3‐NBAmide), as well as the formation of the respective anhydrides from the amides were investigated in a wide acidity range. 1,8‐NBN equilibrates with 1,8‐NBAmide in mild alkali. Under the same conditions 2,3‐NBN quantitatively yields 2,3‐NBAmide. Over a wide range of acidities the reactions of the 1,8‐ and 2,3‐N‐butyl‐naphthalamides (or imides) yield similar products but with widely different rates and at distinct pH's. Anhydride formation in acid was demonstrated for 1,8‐NBAmide. The reactions mechanisms were rationalized in the manifold pathways of ab initio calculations. The differences in rates and pH ranges in the reactions of the 1,8‐ and 2,3‐N‐butyl‐naphthalamides were attributed to differences in the stability of the tetrahedral intermediates in alkali as well as the relative stabilities of the five and six‐membered ring intermediates. The rate of carboxylic acid assisted 1,8‐N‐Butyl‐naphthalamide hydrolysis is one of the largest described for amide hydrolysis models. Copyright © 2010 John Wiley & Sons, Ltd.     

Comparative study on the thermal behavior of two similar triterpenes from birch

A comparative study on the thermal behavior of betuline and betulinic acid was performed using a TG–FTIR hyphenated technique. The comparison was focused on the kinetic of the relevant thermal-induced phenomenon. Using three different data processing strategy, that is, Friedman, Flynn–Wall–Ozawa, and nonparametric kinetic, homogeneous values for the activation energy were obtained, especially by betulinic acid. The advantages of the nonparametric kinetic method were revealed, especially by obtaining the explicit kinetic parameters of the conversion function, without any “a priori” hypothesis.     

Antibacterial Action of 4,4'-Bipyrazolyl-Based Silver(I) Coordination Polymers Embedded in PE Disks

Coupling the rigid spacer 4,4'-bipyrazole (H(2)BPZ), in its anionic or neutral form, to different silver(I) salts allowed isolation of the novel coordination polymers [Ag(2)(BPZ)] (1) and [Ag(H(2)BPZ)(X)] (X = NO(3), 2; ClO(4), 3; BF(4), 4; PF(6), 5; CH(3)SO(3), 6; CF(3)SO(3), 7), which were fully characterized by infrared and emission spectroscopies, thermal analysis, and X-ray powder diffraction. The crystal structure of 1 consists of 2-D layers containing 1-D chains of Ag(I) ions bridged by exo-tetradentate bipyrazolato moieties. The crystal structures of the [Ag(H(2)BPZ)(X)] species 2-7 feature 1-D chains of [Ag(H(2)BPZ)] stoichiometry, along which the metal centers are bridged by exo-bidentate bipyrazolyl spacers. Contacts among adjacent chains are mediated by the counterions through nonbonding interactions involving the Ag(I) ions and the pyrazolyl N-H groups. Thermogravimetric analyses disclosed the good thermal stability of these materials, decomposing in the range 200-300 °C. Under UV irradiation at room temperature, all the species showed a yellow-green emission centered in the range 520-522 nm. When embedded into polyethylene disks, 1, 2, and 4-7 demonstrated their activity as topical antibacterial agents against suspensions of E. coli, P. aeruginosa, and S. aureus: complete reduction of the three bacterial strains was achieved in 24 h, reduction of S. aureus reaching ca. 90% in only 2 h. Biocidal action was expressed also by contact susceptibility tests.     

Sensor Modified with Gold Nanoparticles Stabilized in Dialdehyde Starch/DMSO Matrix for Methyldopa Detection

In this study, gold nanoparticles (AuNP) were synthesized using a novel stabilizer based on dialdehyde starch polymer (DAS) and dimethyl sulfoxide (DMSO) and the nanomaterial was applied to develop a sensor for methyldopa detection. The nanoparticles were characterized by transmission electron microscopy and the proposed sensor was electrochemically characterized by electrochemical impedance spectroscopy, chronocoulometry and square-wave voltammetry. Under optimized conditions (0.1 mol L⁻¹ McIlvaine buffer solution at pH 3.5 and 50 μL AuNP/DAS-DMSO), using square-wave voltammetry, the calibration curve presented a linear range of 0.99 to 19.60 μmol L⁻¹, with a detection limit of 0.50 μmol L⁻¹. The sensor showed good accuracy, with coefficients of variation of 7.8 % (inter-day; n=6) and 5.9 % (intra-day; n=3), and recovery values in the range of 95.3 to 105.2 %. The methyldopa content in a pharmaceutical sample was determined and the results show good correlation with the label value and the method recommended by the Pharmacopoeia, representing a fast and accurate alternative for detecting methyldopa in pharmaceutical products.     

Comparison of univariate and multivariate calibration for the determination of micronutrients in pellets of plant materials by laser induced breakdown spectrometry

The application of laser induced breakdown spectrometry (LIBS) aiming the direct analysis of plant materials is a great challenge that still needs efforts for its development and validation. In this way, a series of experimental approaches has been carried out in order to show that LIBS can be used as an alternative method to wet acid digestions based methods for analysis of agricultural and environmental samples. The large amount of information provided by LIBS spectra for these complex samples increases the difficulties for selecting the most appropriated wavelengths for each analyte. Some applications have suggested that improvements in both accuracy and precision can be achieved by the application of multivariate calibration in LIBS data when compared to the univariate regression developed with line emission intensities. In the present work, the performance of univariate and multivariate calibration, based on partial least squares regression (PLSR), was compared for analysis of pellets of plant materials made from an appropriate mixture of cryogenically ground samples with cellulose as the binding agent. The development of a specific PLSR model for each analyte and the selection of spectral regions containing only lines of the analyte of interest were the best conditions for the analysis. In this particular application, these models showed a similar performance, but PLSR seemed to be more robust due to a lower occurrence of outliers in comparison to the univariate method. Data suggests that efforts dealing with sample presentation and fitness of standards for LIBS analysis must be done in order to fulfill the boundary conditions for matrix independent development and validation.     

Self-assembled monolayer of nickel(II) complex and thiol on gold electrode for the determination of catechin

Self-assembled monolayers of a nickel(II) complex and 3-mercaptopropionic acid on a gold electrode were obtained for determination of catechin by square wave voltammetry. The complex [Ni^IIL] with L = [N-(methyl)-N′-(2-pyridylmethyl)-N,N′-bis(3,5-di-tert-butyl-2-hydroxybenzyl)-1,3-propanediamine[nickel(II)] was synthesized and characterized by ¹H NMR, IR, and electronic spectroscopies and electrochemical methods. The optimized conditions obtained for the electrodes were 0.1 mol L⁻¹ phosphate buffer solution (pH 7.0), frequency of 80.0 Hz, pulse amplitude of 60.0 mV and scan increment of 10.0 mV. Under these optimum conditions, the resultant peak current on square wave voltammograms increases linearly with the concentration of catechin in the range of 3.31 × 10⁻⁶ to 2.53 × 10⁻⁵ mol L⁻¹ with detection limits of 8.26 × 10⁻⁷ mol L⁻¹. The relative standard deviation for a solution containing 1.61 × 10⁻⁵ mol L⁻¹ catechin solution was 2.45% for eight successive assays. The lifetime of the Ni(II) complex-SAM-Au electrode was investigated through testing every day over 4 weeks. The results showed apparent loss of activity after 20 days. The results obtained for catechin in green tea samples using the proposed sensor and those obtained by electrophoresis are in agreement at the 95% confidence level.