Development and validation of an HPLC-UV detection assay for the determination of rufinamide in human plasma and saliva

The development of a simple and rapid high-performance liquid chromatography (HPLC) method for the determination of the new antiepileptic drug rufinamide (RFN) in human plasma and saliva is reported. Samples (250 μl) are alkalinized with ammonium hydroxide (pH 9.25) and extracted with dichloromethane using metoclopramide as internal standard. Separation is achieved with a Spherisorb silica column (250 × 4.6 mm i.d., 5 μm) at 30 °C using as mobile phase a solution of methanol/dichloromethane/n-hexane 10/25/65 (vol/vol/vol) mixed with 6 ml ammonium hydroxide. The instrument used was a Shimadzu LC-10Av chromatograph and flow rate was 1.5 ml min^-1, with a LaChrom L-7400 UV detector set at 230 nm. Calibration curves are linear [r ² = 0.998 ± 0.002 for plasma (n = 10) and r ² = 0.999 ± 0.001 for saliva (n = 9)] over the range of 0.25–20.0 μg ml^-1, with a limit of quantification at 0.25 μg ml^-1. Precision and accuracy are within current acceptability standards. The assay is suitable for pharmacokinetic studies in humans and for therapeutic drug monitoring.     

Porous Aerogels and Adsorption of Pollutants from Water and Air: A Review

Aerogels are open, three-dimensional, porous materials characterized by outstanding properties, such as low density, high porosity, and high surface area. They have been used in various fields as adsorbents, catalysts, materials for thermal insulation, or matrices for drug delivery. Aerogels have been successfully used for environmental applications to eliminate toxic and harmful substances—such as metal ions or organic dyes—contained in wastewater, and pollutants—including aromatic or oxygenated volatile organic compounds (VOCs)—contained in the air. This updated review on the use of different aerogels—for instance, graphene oxide-, cellulose-, chitosan-, and silica-based aerogels—provides information on their various applications in removing pollutants, the results obtained, and potential future developments.     

Methomyl Detection by Inhibition of Laccase Using a Carbon Ceramic Biosensor

A sol–gel derived carbon ceramic biosensor was used for methomyl determination in vegetable extract samples based on the immobilization of laccase from Aspergillus oryzae. Esculetin was chosen as the substrate for laccase in order to measure inhibition by this pesticide. The analytical curve was linear for methomyl concentrations of 0.5 to 12.2 µM with a detection limit of 0.2 µM. The lifetime of the proposed biosensor was 60 days and the recovery from vegetable extract samples ranged from 98.0 to 104.2 %. The results using the proposed method are in agreement with those using HPLC at the 95 % confidence level.     

Genipin‐Cross‐Linked Chitosan as a Support for Laccase Biosensor

In this study a biosensor with laccase immobilized in a chitosan matrix was developed. Prior to the laccase immobilization the chitosan was cross‐linked with genipin, a naturally‐occurring cross‐linking agent, and incorporated into a carbon‐paste electrode. Analytical parameters for caffeic acid, such as repeatability (2.7 %), reproducibility (3.0 %), linearity (0.27 and 33 µM; r²≥0.9983), limit of detection (LOD=0.18 µM) and recovery (96–103 %), were determined. The method was applied in the determination of the total phenolic content of mate herb samples. The good performance of the method can be attributed to the effective immobilization of laccase in the cross‐linked support.     

Synthesis of Novel 4-Fluoro-2H-pyrazol-3-ylamines

A new and efficient synthesis for the preparation of novel 4-fluoro-2H-pyrazol-3-ylamines is described. It involves the reaction of an acyl chloride with fluoroacetonitrile and sequential ring closure of the α-fluoro-β-ketonitrile with hydrazine. Utilizing this synthetic protocol, we have synthesized a variety of 4-fluoro-2H-pyrazol-3-ylamines with different steric and electronic demands.     

Electrochemical Sensor Based on Gold Nanoparticles Stabilized in Poly(Allylamine hydrochloride) for Determination of Vanillin

Gold nanoparticles stabilized in poly(allylamine hydrochloride) (AuNP‐PAH) were synthesized, characterized and applied in the development of a new sensor for the determination of vanillin by square‐wave voltammetry. Under optimized conditions, the calibration curve showed a linear range for vanillin of 0.90 to 15.0 µmol L^?1, with a limit of detection of 55 nmol L^?1. The sensor demonstrated acceptable selectivity and stability, as well as good intra‐day and inter‐day repeatability and electrode‐to‐electrode repeatability (with relative standard deviations of 3.5, 4.5 and 3.9 %, respectively). The sensor was successfully applied in the determination of vanillin in different commercial samples.     

Effects of annealing above Tg on the physical aging of quenched PLLA studied by modulated temperature FTIR

The effect of the annealing few degrees above the glass transition temperature (T_da = 62 °C) on the physical aging (T_pa = 51 °C) of amorphous quenched poly(l ‐lactide) is investigated by an implementation of variable temperature Fourier transform infrared (FTIR). By using a temperature program composed of a linear heating ramp superimposed to a temperature modulation (modulated temperature FTIR), the reversing and nonreversing intensity variation of selected bands, related to high‐energy gg and low‐energy gt conformers, is investigated. It is observed that the annealing above T _g changes irreversibly the conformation distribution of the liquid polymer. The glasses obtained from annealed and nonannealed liquids behave differently, evolving in the physical aging toward their own liquid state and retaining the memory of their original condition before the vitrification. The recovery through T _g of the relaxation occurred in the physical aging depends not only from aging conditions but also by the thermal history of the sample above the T_g. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 174–181     

Flow injection spectrophotometric determination of isoproterenol using an avocado (Persea americana) crude extract immobilized on controlled-pore silica reactor

An enzymatic reactor was constructed by the immobilization of polyphenol oxidase (PPO) from avocado (Persea americana) crude extract in an inorganic support of controlled pore silica (CPS), after a previous step of silanization. This inorganic support has been used as an excellent carrier to immobilize this enzyme and the enzymatic reactor was used in a flow injection system for the determination of isoproterenol in pharmaceutical products. The procedure is based on the oxidation reaction of this drug with immobilized PPO and the product obtained was monitored at 492 nm. This system presented an analytical curve from 1.23x10(-4) to 7.38x10(-4) mol l(-1) isoproterenol with a detection limit of 6.25x10(-5) mol l(-1). Recoveries of isoproterenol between 98.5 and 103.1%, a relative standard deviation (R.S.D.) less than 1% (n=10) and 36 determinations per h were obtained.     

Isotactic polypropylene reversible crystallization investigated by modulated temperature and quasi‐isothermal FTIR

Modulated temperature techniques allow to separate the reversing and non‐reversing contributions of material transitions. To investigate reversible crystallization and melting of isotactic polypropylene (iPP) at microstructural level, in this research, modulated temperature Fourier transform infrared (MTFTIR) and quasi‐isothermal FTIR (QIFTIR) analyses are used. By following the intensity variation of iPP regularity bands, associated with 3₁ helix structures of different lengths (n repeating units), MTFTIR evidences that, independently from helix length, a reversing coil–helix transition takes place few degrees below the non‐reversing crystallization onset. By comparing spectroscopic and differential scanning calorimetry experiments performed in quasi‐isothermal conditions, the reversing transition was found to be associated with the reversible melting‐crystallization phenomenon. Moreover, QIFTIR evidences that helices of different lengths contribute differently to the reversible transition: the helices composed of n = 10 and n = 12 are active into all the explored temperature range (30–130 °C) whereas the shortest (n = 6) and the longest (n > 15) helices contribute to reversibility at T > 100 °C. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 922–931     

N-acetylcysteine prevents HIV gp 120-related damage of human cultured astrocytes: correlation with glutamine synthase dysfunction

Background  

HIV envelope gp 120 glycoprotein is released during active HIV infection of brain macrophages thereby generating inflammation and oxidative stress which contribute to the development of the AIDS-Dementia Complex (ADC). Gp120 has also been found capable to generate excitotoxic effect on brain tissue via enhancement of glutamatergic neurotransmission, leading to neuronal and astroglial damage, though the mechanism is still to be better understood.