Preliminary studies of laser-induced breakdown spectrometry for the determination of Ba,Cd, Cr and Pb in toys

The performance of laser-induced breakdown spectrometry (LIBS) for the determination of Ba, Cd, Cr and Pb in toys has been evaluated by using a Nd:YAG laser operating at 1064 nm and an Echelle spectrometer with intensified charge-coupled device detector. Samples were purchased in different cities of São Paulo State market and analyzed directly without sample preparation. Laser-induced breakdown spectrometry experimental conditions (number of pulses, delay time, integration time gate and pulse energy) were optimized by using a Doehlert design. Laser-induced breakdown spectrometry signals correlated reasonably well with inductively coupled plasma optical emission spectrometry (ICP OES) concentrations after microwave-assisted acid digestion of selected samples. Thermal analysis was used for polymer identification and scanning electron microscopy to visualize differences in crater geometry of different polymers employed for toy fabrication. Results indicate that laser-induced breakdown spectrometry can be proposed as a rapid screening method for investigation of potentially toxic elements in toys. The unique application of laser-induced breakdown spectrometry for identification of contaminants in successive layers of ink and polymer is also demonstrated.     

Halloysite clay nanotubes and platinum nanoparticles dispersed in ionic liquid applied in the development of a catecholamine biosensor

Halloysite clay nanotubes were used as a support for the immobilization of the enzyme peroxidase from clover sprouts (Trifolium), and employed together with platinum nanoparticles in 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid (Pt-BMI·PF(6)) in the development of a new biosensor for the determination of catecholamines by square-wave voltammetry. Under optimized conditions, the analytical curves showed detection limits of 0.05, 0.06, 0.07, 0.12 μM for dopamine, isoproterenol, dobutamine and epinephrine, respectively. The biosensor demonstrated high sensitivity, good repeatability and reproducibility, and long-term stability (18% decrease in response over 150 days). A recovery study of dopamine in pharmaceutical samples gave values from 97.5 to 101.4%. The proposed biosensor was successfully applied to the determination of dopamine in pharmaceutical samples, with a maximum relative error of ±1.0% in relation to the standard (spectrophotometric) method. The good analytical performance of the proposed method can be attributed to the efficient immobilization of the peroxidase in the nanoclay, and the facilitation of electron transfer between the protein and the electrode surface due to the presence of the Pt nanoparticles and ionic liquid.     

Interfacial concentrations of chloride and bromide in zwitterionic micelles with opposite dipoles: experimental determination by chemical trapping and a theoretical description

Interfacial concentrations of chloride and bromide ions, with Li(+), Na(+), K(+), Rb(+), Cs(+), trimethylammonium (TMA(+)), Ca(2+), and Mg(2+) as counterions, were determined by chemical trapping in micelles formed by two zwitterionic surfactants, namely N-hexadecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (HPS) and hexadecylphosphorylcholine (HDPC) micelles. Appropriate standard curves for the chemical trapping method were obtained by measuring the product yields of chloride and bromide salts with 2,4,6-trimethyl-benzenediazonium (BF(4)) in the presence of low molecular analogs (N,N,N-trimethyl-propane sulfonate and methyl-phosphorylcholine) of the employed surfactants. The experimentally determined values for the local Br(-) (Cl(-)) concentrations were modeled by fully integrated non-linear Poisson Boltzmann equations. The best fits to all experimental data were obtained by considering that ions at the interface are not fixed at an adsorption site but are free to move in the interfacial plane. In addition, the calculation of ion distribution allowed the estimation of the degree of ion coverage by using standard chemical potential differences accounting for ion specificity.     

Production of Mesoglycan/PCL Based Composites through Supercritical Impregnation

The development of targeted therapies for wound repair is knowing a growing interest due to the increasing aging of the population and the incidence of chronic pathologies, mainly pressure ulcers. Among molecules recruiting cell populations and promoting the formation of new vital tissue, sodium mesoglycan (MSG) has been proven to be effective in wound healing. In this work, MSG impregnation of polymer matrices has been attempted by a supercritical carbon dioxide-based process. Polymeric matrices are composed of polycaprolactone blends, where water-soluble polymers, polyethylene glycol, polyvinyl pyrrolidone, gelatin, and thermoplastic starch, have been employed to modulate the MSG release, making the devices potentially suitable for topical administrations. Two different techniques have been used to obtain the films: the first one is compression molding, producing compact and continuous structures, and the second one is electrospinning, producing membrane-like designs. A higher amount of MSG can be loaded into the polymeric matrix in the membrane-like structures since, in these films, the impregnation process is faster than in the case of compression molded films, where the carbon dioxide has firstly diffused and then released the active molecule. The type of water-soluble polymer influences the drug release rate: the blend polycaprolactone-gelatin gives a prolonged release potentially suitable for topical administration.     

Biseugenol Exhibited Anti-Inflammatory and Anti-Asthmatic Effects in an Asthma Mouse Model of Mixed-Granulocytic Asthma

In the present work, the anti-inflammatory and antiasthmatic potential of biseugenol, isolated as the main component from n-hexane extract from leaves of Nectandra leucantha and chemically prepared using oxidative coupling from eugenol, was evaluated in an experimental model of mixed-granulocytic asthma. Initially, in silico studies of biseugenol showed good predictions for drug-likeness, with adherence to Lipinski’s rules of five (RO5), good Absorption, Distribution, Metabolism and Excretion (ADME) properties and no alerts for Pan-Assay Interference Compounds (PAINS), indicating adequate adherence to perform in vivo assays. Biseugenol (20 mg·kg⁻¹) was thus administered intraperitoneally (four days of treatment) and resulted in a significant reduction in both eosinophils and neutrophils of bronchoalveolar lavage fluid in ovalbumin-sensitized mice with no statistical difference from dexamethasone (5 mg·kg⁻¹). As for lung function parameters, biseugenol (20 mg·kg⁻¹) significantly reduced airway and tissue damping in comparison to ovalbumin group, with similar efficacy to positive control dexamethasone. Airway hyperresponsiveness to intravenous methacholine was reduced with biseugenol but was inferior to dexamethasone in higher doses. In conclusion, biseugenol displayed antiasthmatic effects, as observed through the reduction of inflammation and airway hyperresponsiveness, with similar effects to dexamethasone, on mixed-granulocytic ovalbumin-sensitized mice.     

Effects of annealing above Tg on the physical aging of quenched PLLA studied by modulated temperature FTIR

The effect of the annealing few degrees above the glass transition temperature (T_da = 62 °C) on the physical aging (T_pa = 51 °C) of amorphous quenched poly(l ‐lactide) is investigated by an implementation of variable temperature Fourier transform infrared (FTIR). By using a temperature program composed of a linear heating ramp superimposed to a temperature modulation (modulated temperature FTIR), the reversing and nonreversing intensity variation of selected bands, related to high‐energy gg and low‐energy gt conformers, is investigated. It is observed that the annealing above T _g changes irreversibly the conformation distribution of the liquid polymer. The glasses obtained from annealed and nonannealed liquids behave differently, evolving in the physical aging toward their own liquid state and retaining the memory of their original condition before the vitrification. The recovery through T _g of the relaxation occurred in the physical aging depends not only from aging conditions but also by the thermal history of the sample above the T_g. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 174–181     

Methomyl Detection by Inhibition of Laccase Using a Carbon Ceramic Biosensor

A sol–gel derived carbon ceramic biosensor was used for methomyl determination in vegetable extract samples based on the immobilization of laccase from Aspergillus oryzae. Esculetin was chosen as the substrate for laccase in order to measure inhibition by this pesticide. The analytical curve was linear for methomyl concentrations of 0.5 to 12.2 µM with a detection limit of 0.2 µM. The lifetime of the proposed biosensor was 60 days and the recovery from vegetable extract samples ranged from 98.0 to 104.2 %. The results using the proposed method are in agreement with those using HPLC at the 95 % confidence level.     

Flow injection spectrophotometric determination of isoproterenol using an avocado (Persea americana) crude extract immobilized on controlled-pore silica reactor

An enzymatic reactor was constructed by the immobilization of polyphenol oxidase (PPO) from avocado (Persea americana) crude extract in an inorganic support of controlled pore silica (CPS), after a previous step of silanization. This inorganic support has been used as an excellent carrier to immobilize this enzyme and the enzymatic reactor was used in a flow injection system for the determination of isoproterenol in pharmaceutical products. The procedure is based on the oxidation reaction of this drug with immobilized PPO and the product obtained was monitored at 492 nm. This system presented an analytical curve from 1.23x10(-4) to 7.38x10(-4) mol l(-1) isoproterenol with a detection limit of 6.25x10(-5) mol l(-1). Recoveries of isoproterenol between 98.5 and 103.1%, a relative standard deviation (R.S.D.) less than 1% (n=10) and 36 determinations per h were obtained.     

Macromolecules in ordered media. II. A fluorescence study of the polymer-liposome association

The interactions of poly (4-vinyl pyridine) with dimyristoylphosphatidic acid-based liposomes were studied in heterogeneous solution systems. The polymer was dispersed in aqueous buffer solutions of small unilamellar vesicles and after a suitable period of incubation to raise the equilibrium, the experiments has been conducted as a function of polymer concentration and temperature. According to the measurements of the steady-state fluorescence spectra, changes in the intensities as well as shifts in the emission peak wavelength, has served as raw data to accounting for the polymer-vesicle interactions. Quantitative evaluation of the interaction has been done using a simple associating model with some approximations. The key parameters evaluated were the amount of polymer bound and the number of charged lipids on a membrane site as well as the number of effective charges of poly (4-vinyl pyridine) chains at the liposome interface.