A characterization of uniformly bounded cosine functions generators

Suported by DAAD, West Germany.     

Chaos and intermittent bursting in a reaction-diffusion process

Karhunen-Loeve decomposition is done on a chaotic spatio-temporal solution obtained from a nonlinear reaction-diffusion model of a chemical system simulating a chemical process in an open Couette-flow reactor. Using a Galerkin projection of the dominant Karhunen-Loeve modes back onto the nonlinear partial differential system, we obtain an ordinary differential equation model of the same process. Major features such as intermittent and chaotic bursting of the nonlinear process as well as the mechanism of transition to chaos are shown to exist in the low-dimensional model as well as the PDE model. From the low-dimensional model the onset of intermittent bursts followed by small amplitude oscillations is shown to arise due to a sequence of saddle-node bifurcations.     

Iron,nickel and zinc malates coordination compounds cynthesis,characterization and thermal behaviour

The coordinations compounds (NH₄)[Fe(C₄H₄O₅)(OH)₂]·0.5H₂O, [Ni(C₄H₄O₅)]·3H₂O and [Zn(C₄H₄O₅)]·5H₂O were synthesized by a precipitation method and characterized by chemical analysis, spectral (IR, UV-VIS) and magnetical investigations. In the range 50-600°C stepped thermal decompositions occur with formation of anhydrous malates, malonates, oxoacetates (iron and nickel compounds) and hydroxocarbonate (Zn compound) as intermediates observed by FT-IR spectroscopy. α-Fe₂O₃, NiO and ZnO constitute the final decomposition products. This revised version was published online in July 2006 with corrections to the Cover Date.     

DFT/TDDFT studies of the geometry, electronic structure and spectra of (12S)-1,4,7,10-tetraazadicyclo[10,3,0]-pentadecane-3,11-dione and its derivatives

The FT-Raman and UV-visible spectra of (12S)-1,4,7,10-tetraazadicyclo[10,3,0]-pentadecane-3,11-dione and its derivatives were obtained and discussed. The harmonic vibrational wavenumbers and the corresponding Raman scattering activities in their electronic ground-states were calculated at the DFT-B3LYP/6-31G(d) level of theory. The calculated wavenumbers were then scaled and compared with the experimental values. The 7-(2,4-dinitrophenyl)-(12S)-1,4,7,10-tetrazadicyclo[10,3,0]-pentadecane-3,11-dione derivative has mainly an amide (II) character, while the others have an amide (I) character. Moreover, the different substituents do not cause a significant shift of the vibrational mode of the macrocyclic plane. The electronic vertical excitation energy and the oscillator strength were determined with the help of TDDFT calculations and by employing pure (BLYP) and hybrid (B3LYP, B3P86, and mPW1PW91) functionals together with the 6-31G(d) basis set. The BLYP functional reproduces the UV-vis absorption spectra better than the B3LYP, B3P86, or mPW1PW91 hybrid functionals. A dimolecular model, which considers hydrogen-bonded structures, proved that strong inter- and intramolecular hydrogen bonds are present in these compounds. Due to the transannular effect, the UV-vis absorption spectrum of macrocyclic dioxotetraamines is completely different from that of single amide compounds.     

Assessing the Functional Properties of TiZr Nanotubular Structures for Biomedical Applications,through Nano-Scratch Tests and Adhesion Force Maps

In this work we present the results of a functional properties assessment via Atomic Force Microscopy (AFM)-based surface morphology, surface roughness, nano-scratch tests and adhesion force maps of TiZr-based nanotubular structures. The nanostructures have been electrochemically prepared in a glycerin + 15 vol.% H₂O + 0.2 M NH4F electrolyte. The AFM topography images confirmed the successful preparation of the nanotubular coatings. The Root Mean Square (RMS) and average (Ra) roughness parameters increased after anodizing, while the mean adhesion force value decreased. The prepared nanocoatings exhibited a smaller mean scratch hardness value compared to the un-coated TiZr. However, the mean hardness (H) values of the coatings highlight their potential in having reliable mechanical resistances, which along with the significant increase of the surface roughness parameters, which could help in improving the osseointegration, and also with the important decrease of the mean adhesion force, which could lead to a reduction in bacterial adhesion, are providing the nanostructures with a great potential to be used as a better alternative for Ti implants in dentistry.     

Strategies to Improve the Thermo-Oxidative Stability of Sunflower Oil by Exploiting the Antioxidant Potential of Blueberries Processing Byproducts

This research was conducted in order to establish the effectiveness of two freeze-dried extracts obtained from blueberry processing byproducts resulting from juice manufacturing compared to butylated hydroxytoluene (BHT) in delaying the lipid oxidation of sunflower oil subjected to high-temperature convective heating at 180 °C up to 12 h under simulated frying conditions. The fruits were harvested from spontaneous flora of two regions of Romania, Arieseni (Alba County) and Paltinis (Sibiu County) and the blueberry byproducts extracts (BBE) were noted according to the origin place as ABBE and PBBE. The progress of lipid thermo-oxidation was investigated in terms of peroxide value (PV), p-anisidine value (p-AV), the response of TBA-malondialdehyde interactions assessed by thiobarbituric acid (TBA) method, the total oxidation (TOTOX) value and inhibition of oil oxidation (IO). The recorded data highlighted that BBE exhibit a high inhibitory response on lipid thermo-oxidation. The inhibitory effect was concentration-dependent, thus, the degree of lipid oxidation was in reverse related to the BBE dose. The exposure of the oil samples supplemented with 800 ppm BBE (ABBE, PBBE) to a high-temperature heating for 12 h led to a significant decrease of the assessed indices compared to additives-free sunflower oil sample as follows: PV (46%; 45%), p-AV (21%; 17%), TOTOX (27%; 24%), TBA value (25%; 11%). Regarding the impact of the origin on the potential of BBE to inhibit the lipid oxidative degradation, it was noted that ABBE derived from blueberries grown in a region with a milder climate with moderate precipitations and higher temperatures showed a stronger inhibitory effect on lipid thermo-oxidation than PBBE. A moderate level of 500 ppm BBE inhibited the lipid oxidation similar to 200 ppm BHT. The reported results reveal that BBE represent efficient natural antioxidants that could be successfully applied to improve the thermo-oxidative stability of sunflower oil used in various high-temperature food applications.     

Substituent effects on the stereochemical outcome of the baker’s yeast-mediated biotransformation of α-hydroxy- and α-acetoxymethyl-5-phenylfuran-2-yl-ethanones

In this Letter the baker’s yeast-mediated biotransformation of variously substituted α-hydroxy- and α-acetoxymethyl-5-phenylfuran-2-yl-ethanones is described. The stereochemical outcome of the reactions was strongly influenced by the nature of the substituents on the phenyl ring.     

Cracking study of pentakis(dimethylamino)tantalum vapors by Knudsen cell mass spectrometry

Organometallic molecules are commonly used as gaseous precursors in Atomic Layer Deposition/Chemical Vapor Deposition (ALD/CVD) processes. However, the use of these molecules, which are generally thermally unstable at temperatures close to the deposition temperature, requires an understanding of their gas‐phase chemical behavior. The thermal cracking of the gaseous precursor, pentakis(dimethylamino) tantalum (PDMAT), generally adopted in the ALD/CVD TaN deposition processes, has been studied in the temperature range from 343 to 723K using a specific reactor coupled with a high‐temperature mass spectrometer. This reactor – built as tandem Knudsen cells – consists of two superimposed cells. The first stage reactor – an evaporation cell – provides an input saturated vapor flow operating from room temperature to 333K. The second stage cell, named the cracking cell, operated from 333 to 723K in the present study. Experiments showed the appearance of many gaseous species when the cracking temperature increased and, in particular, dimethylamine, corresponding to the saturated organic branches of PDMAT. Decomposition products of the HNC₂H₆ branch were observed at relatively high temperature, namely above 633K. This gas‐phase study – as for the preceding saturated one – shows the presence of oxygen‐containing molecules in PDMAT cracked vapor. Thus, it explains the systematic presence of oxygen contamination in the deposited TaN films observed in ALD/CVD industrial processes. Copyright © 2010 John Wiley & Sons, Ltd.     

Siloxane‐Crown Ether Polyamide Based Electrode for Electrochemical Determination of Lead(II) in Aqueous Solution

A siloxane‐crown ether polyamide copolymer (PDMS‐PA‐DB18C6) was electrochemically investigated for fabrication of lead‐sensitive electrodes for trace analysis in aqueous solutions. The PDMS‐PA‐DB18C6 electrodes were successfully evaluated for anodic stripping voltammetric determination of lead(II) as a promising alternative for the detection of lead at ppb levels. By a judicious choice of the deposition time, electrolyte concentration and pulse amplitude, good analytical performance of the developed sensor could be achieved, with a linear response in the range of 20–700 ppb, when LOD of 3.5 ppb could be attained. This method showed a good degree of selectivity and sensitivity for lead, suitable for the determination of Pb²⁺ in wastewater sample.