Sensing lipid bilayer formation and expansion with a microfabricated cantilever array

We show that cantilever array sensors can sense the formation of supported phospholipid bilayers on their surface and that they can monitor changes in mechanical properties of lipid bilayers. Supported lipid bilayers were formed on top of microfabricated cantilevers by vesicle fusion. The formation of bilayers led to a bending of the cantilevers of 70-590 nm comparable to a surface stress of 27-224 mN/m. Physisorption of bilayers of DOPC and other bilayers on the silicon oxide surface of cantilevers led to a tensile bending of about 70 nm whereas formation of chemisorbed bilayers of mixed thiolated (DPPTE) and non-thiolated lipids (DOPC) on the gold side of cantilevers led to a compressive bending of nearly 600 nm which depended on the ratio of DPPTE to DOPC. First results on bending of bilayer-covered cantilevers due to their interaction with the pore-forming peptide melittin are shown. The results demonstrate that cantilever sensors with immobilized bilayers can be used as model systems to investigate mechanical properties of cellular membranes and may be used for screening of membrane processes involving modification, lateral expansion, or contraction of membranes.     

Prevalence of Antimicrobial Resistant Bacteria from Conjunctival Flora in an Eye Infection Prone Breed (Saint Bernard)

The conjunctival bacterial resident and opportunistic flora of dogs may represent a major source of dissemination of pathogens throughout the environment or to other animals and humans. Nevertheless, contamination with bacteria from external sources is common. In this context, the study of the antimicrobial resistance (AMR) pattern may represent an indicator of multidrug resistant (MDR) strains exchange. The present study was focused on a single predisposed breed—Saint Bernard. The evaluated animals were healthy, but about half had a history of ocular disease/treatment. The swabs collected from conjunctival sacs were evaluated by conventional microbiological cultivation and antimicrobial susceptibility testing (AST). The most prevalent Gram-positive was Staphylococcus spp.; regardless of the history, while Gram-negative was Pseudomonas spp.; exclusively from dogs with a history of ocular disease/treatment. Other identified genera were represented by Bacillus, Streptococcus, Trueperella, Aeromonas and Neisseria. The obtained results suggest a possible association between the presence of mixed flora and a history of ocular disease/treatment. A high AMR was generally observed (90%) in all isolates, especially for kanamycin, doxycycline, chloramphenicol and penicillin. MDR was recorded in Staphylococcus spp. and Pseudomonas spp. This result together with a well-known zoonotic potential may suggest an exchange of these strains within animal human populations and the environment.     

Preparation and Antimicrobial Activity of Chitosan and Its Derivatives: A Concise Review

Despite the advantages presented by synthetic polymers such as strength and durability, the lack of biodegradability associated with the persistence in the environment for a long time turned the attention of researchers to natural polymers. Being biodegradable, biopolymers proved to be extremely beneficial to the environment. At present, they represent an important class of materials with applications in all economic sectors, but also in medicine. They find applications as absorbers, cosmetics, controlled drug delivery, tissue engineering, etc. Chitosan is one of the natural polymers which raised a strong interest for researchers due to some exceptional properties such as biodegradability, biocompatibility, nontoxicity, non-antigenicity, low-cost and numerous pharmacological properties as antimicrobial, antitumor, antioxidant, antidiabetic, immunoenhancing. In addition to this, the free amino and hydroxyl groups make it susceptible to a series of structural modulations, obtaining some derivatives with different biomedical applications. This review approaches the physico-chemical and pharmacological properties of chitosan and its derivatives, focusing on the antimicrobial potential including mechanism of action, factors that influence the antimicrobial activity and the activity against resistant strains, topics of great interest in the context of the concern raised by the available therapeutic options for infections, especially with resistant strains.     

Terpyridine-Functionalized Calixarenes: Synthesis,Characterization and Anion Sensing Applications

Lanthanide complexes have been developed and are reported herein. These complexes were derived from a terpyridine-functionalized calix[4]arene ligand, chelated with Tb³⁺ and Eu³⁺. Synthesis of these complexes was achieved in two steps from a calix[4]arene derivative: (1) amide coupling of a calix[4]arene bearing carboxylic acid functionalities and (2) metallation with a lanthanide triflate salt. The ligand and its complexes were characterized by NMR (¹H and ¹³C), fluorescence and UV-vis spectroscopy as well as MS. The photophysical properties of these complexes were studied; high molar absorptivity values, modest quantum yields and luminescence lifetimes on the ms timescale were obtained. Anion binding results in a change in the photophysical properties of the complexes. The anion sensing ability of the Tb(III) complex was evaluated via visual detection, UV-vis and fluorescence studies. The sensor was found to be responsive towards a variety of anions, and large binding constants were obtained for the coordination of anions to the sensor.     

Zinc oxide nanostructured platform for electrochemical detection of heavy metals

ZnO nanoparticles (ZnO-NP) were prepared by a facile precipitation technique using di-isopropyl amine as precipitating agent. The morpho-structure and porosity of the as-prepared nano-powder were investigated by FT-IR analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM), and BET analysis. By drop-casting, a composite film was deposited to obtain ZnO-NP-Nafion/GCE modified electrode. The modified electrode was investigated by cyclic voltammetry, electrochemical impedance spectroscopy, and square wave anodic stripping voltammetry (SWASV) for the detection of Pb²⁺, Cd²⁺, Cu²⁺, and Fe³⁺, and it was successfully applied for the detection of Pb²⁺ and Cu²⁺ in real water samples.     

Mapping the phase diagram of single DNA molecule force-induced melting in the presence of ethidium

When a single DNA molecule is stretched beyond its normal contour length, a force-induced melting transition is observed. Ethidium binding increases the DNA contour length, decreases the elongation upon melting, and increases the DNA melting force in a manner that is consistent with the ethidium-induced changes in duplex DNA stability known from thermal melting studies. The DNA stretching curves map out a phase diagram and critical point in the force-extension-ethidium concentration space. Intercalation occurs between alternate base pairs at low forces and between every base pair at high forces.     

Fluctuation conductivity in layered d-wave superconductors near critical disorder

We consider the fluctuation conductivity in the critical region of a disorder induced quantum phase transition in layered d-wave superconductors. We specifically address the fluctuation contribution to the systems conductivity in the limit of large (quasi-two-dimensional system) and small (quasi-three-dimensional system) separation between adjacent layers of the system. Both in-plane and c-axis conductivities were discussed near the point of insulator-superconductor phase transition. The value of the dynamical critical exponent, z = 2, permits a perturbative treatment of this quantum phase transition under the renormalization group approach. We discuss our results for the system conductivities in the critical region as function of temperature and disorder.Received: 10 October 2003, Published online: 23 December 2003PACS: 74.40. + k Fluctuations (noise, chaos, nonequilibrium superconductivity, localization, etc.) - 73.43.Nq Quantum phase transitions     

Entire regularizations of strongly continuous groups and products of analytic generators

Using entire regularizations of groups, we give a characterization of their analytic generators which we apply to the study of products of such generators.

     

The effect of melting-induced volumetric expansion on initiation of laser-induced forward transfer

A numerical model was developed to investigate thermal processes that initiate laser-induced forward transfer (LIFT). The model included laser absorption, conduction, melting, and volumetric expansion in a thin film. The model was used to investigate the role of volumetric expansion associated with the melting process and was used to help explain surface deformations observed in previous studies of LIFT. The results of the model indicated that volumetric expansion initiated fluid motion that was directed away from the substrate, and the fluid motion was sufficient to induce surface deformations that remained after solidification. The resulting textured surface was similar to that observed experimentally below the droplet expulsion threshold. The fluid motion away from the substrate may explain the mechanism by which droplet formation occurs.     

The Effect of Calcium-Silicate Cements on Reparative Dentinogenesis Following Direct Pulp Capping on Animal Models

Dental pulp vitality is a desideratum for preserving the health and functionality of the tooth. In certain clinical situations that lead to pulp exposure, bioactive agents are used in direct pulp-capping procedures to stimulate the dentin-pulp complex and activate reparative dentinogenesis. Hydraulic calcium-silicate cements, derived from Portland cement, can induce the formation of a new dentin bridge at the interface between the biomaterial and the dental pulp. Odontoblasts are molecularly activated, and, if necessary, undifferentiated stem cells in the dental pulp can differentiate into odontoblasts. An extensive review of literature was conducted on MedLine/PubMed database to evaluate the histological outcomes of direct pulp capping with hydraulic calcium-silicate cements performed on animal models. Overall, irrespective of their physico-chemical properties and the molecular mechanisms involved in pulp healing, the effects of cements on tertiary dentin formation and pulp vitality preservation were positive. Histological examinations showed different degrees of dental pulp inflammatory response and complete/incomplete dentin bridge formation during the pulp healing process at different follow-up periods. Calcium silicate materials have the ability to induce reparative dentinogenesis when applied over exposed pulps, with different behaviors, as related to the animal model used, pulpal inflammatory responses, and quality of dentin bridges.