Pyrolysis of poly(phenylene vinylene)s with polycaprolactone side chains

The thermal degradation characteristics of a new macromonomer poly(-caprolactone) with central 4,4′-dicarbaldehyde terphenyl moieties and poly(phenylene vinylene)s with well defined (-caprolactone), (PPV/PCL) as lateral substituents were investigated via direct pyrolysis mass spectrometry. The unexpectedly high thermal stability of the macromonomer was attributed to intermolecular acetylation of benzaldehyde yielding a hemiacetal and causing a crosslinked structure during the pyrolysis. Increased thermal stability of the PCL chains was detected for all samples. The increase in stability of PCL chains was much more pronounced than was detected for poly(p-phenylene)-graft-poly(-caprolactone) copolymer (PPP/PCL); the upward temperature shift was about 100 °C for PPV/PCL and only 20 °C for PPP/CL. This pronounced effect may be due to higher thermal stability of PPV compared to PPP and the decrease in steric hindrance for PPV with PCL side chains.     

When arsine makes the difference: chelating phosphino and bridging arsinoarylthiolato gallium complexes

The (organo)gallium compounds GaCl{(SC6H4-2-PPh2)-kappa2S,P}2 (1), Ga{(SC6H4-2-PPh2)-kappa2S,P}{(SC6H4-2-PPh2)-kappaS}2 (2), GaMe2{(SC6H4-2-PPh2)-kappa2S,P} (3), GatBu2{(SC6H4-2-PPh2)-kappa2S,P} (4), GatBu{(SC6H4-2-PPh2)-kappa2S,P}{(SC6H4-2-PPh2)-kappaS} (5), [GaMe2{(mu2-SC6H4-2-AsPh2)-kappaS}]2 (6), and GatBu{(SC6H4-2-AsPh2)-kappa2S,As}{(SC6H4-2-AsPh2)-kappaS} (7) were obtained from the reaction of 2-EPh2C6H4SH (E = P (PSH), As (AsSH)) with GaCl3 (1, 2) or GaR3 (R = Me, tBu; 3-7) in different molar ratios and under different reaction conditions. Compound 2 was also obtained from Li(PS) and GaCl3 (3.5:1). While a monomeric structure with a chelating phosphinoarylthiolato ligand is observed in GaMe2{(SC6H4-2-PPh2)-kappa2S,P} (3), a dimeric arsinoarylthiolato-bridged complex [GaMe2{(mu2-SC6H4-2-AsPh2)-kappaS}]2 (6) is obtained with the corresponding AsS- ligand. B3LYP/6-31G(d) calculations show that although the dimer is thermodynamically favored for both ligands, the formation of 3 is due to the combination of higher stability of the chelate compared with the monodentate phosphorus ligand and a higher barrier for the ring opening of the PS- than of the AsS- chelate.     

On the calculation of time correlation functions by potential scaling

We present and analyze a general method to calculate time correlation functions from molecular dynamics on scaled potentials for complex systems for which simulation is affected by broken ergodicity. Depending on the value of the scaling factor, correlations can be calculated for times that can be orders of magnitude longer than those accessible to direct simulations. We show that the exact value of the time correlation functions of the original system (i.e., with unscaled potential) can be obtained, in principle, using an action-reweighting scheme based on a stochastic path-integral formalism. Two tests (involving a bistable potential model and a dipeptide bond-vector orientational relaxation) are exemplified to showcase the strengths, as well as the limitations of the approach, and a procedure for the estimation of the time-dependent standard deviation error is outlined.     

Synthesis and characterization of PAni–SiO2 and PTh–SiO2 nanocomposites' thin films by plasma polymerization

In the present work, we explore the possibility to deposit polyaniline–silicon dioxide (PAni–SiO₂) and polythiophene–silicon dioxide (PTh–SiO₂) nanocomposites through a plasma polymerization route. The films were generated by spraying of mixtures of nano-sized silica particles dispersed in the liquid monomer into a plasma stream of the DC-plasma discharge reactor. The silica in the resulted polymer matrix changes the conduction mechanisms varying from ohmic to ballistic and traps inducing the space charged limited currents (SCLC). The silica modifies the morphology and composition of the deposited films.     

(E)-3-(2-Alkyl-10H-phenothiazin-3-yl)-1-arylprop-2-en-1-ones: Preparative, IR, NMR and DFT study on their substituent-dependent reactivity in hydrazinolysis and sonication-assisted oxidation with copper(II)nitrate

A series of novel 3(5)-aryl/ferrocenyl-5(3)-phenothiazinylpyrazoles and pyrazolines were obtained by substituent-dependent regioselective condensation of the corresponding (E)-3-(2-alkyl-10H-phenothiazin-3-yl)-1-aryl/ferrocenylprop-2-en-1-one with hydrazine or methylhydrazine in acetic acid. The different propensity of the primary formed beta-hydrazino adducts to undergo competitive retro-Mannich reaction was interpreted in terms of tautomerisation equilibrium constants calculated by DFT using a solvent model. The regioselectivity of the cyclisation reactions with methylhydrazine and the substituent-dependent redox properties of pyrazolines were also rationalized by comparative DFT calculations performed for simplified model molecules. On the effect of ultrasound-promoted oxidation with copper(II)nitrate phenothiazine-containing pyrazolines, enones and oxo-compounds were selectively transformed into sulfoxides. Only one sulfoxide enone was partially converted into an oxirane derivative. The structure of the novel products was determined by IR and NMR spectroscopy including COSY, HSQC, HMBC and DNOE measurements.     

Binuclear cyclopentadienylcobalt sulfur and phosphinidene complexes Cp2Co2E2 (E = S, PX): Comparison with their Iron carbonyl analogues

Density functional theory studies on a series of Cp₂Co₂E₂ derivatives (E = S and PX; X = H, Cl, OH, OMe, NH₂, NMe₂) predict global minimum butterfly structures with one Co-Co bond for the “body” of the butterfly and four Co-E bonds at the edges of the “wings” of the butterfly. Tetrahedrane structures with both Co-Co and E-E bonds are higher in energy for Cp₂Co₂S₂ and Cp₂Co₂(PH)₂ and are not found in the other systems. This differs from the corresponding Fe₂(CO)₆S₂ and Fe₂(CO)₆(PX)₂ derivatives where tetrahedrane structures are predicted to be the lowest energy structures for all cases except X = NR₂ and OH and such a tetrahedrane structure is found experimentally for Fe₂(CO)₆S₂. The butterfly structures for the Cp₂Co₂E₂ derivatives are of two types. For Cp₂Co₂(PX)₂ (X = H, OH, OMe, NH₂, NMe₂) the lowest energy structures are unsymmetrical butterflies Cp₂Co₂(P)(PX₂) with two X groups on one phosphorus atom and a lone pair on the other (naked) phosphorus atom. Related low-energy unsymmetrical butterfly Fe₂(CO)₆(P)(PX₂) structures, not observed in previous theoretical studies, are now found for the corresponding Fe₂(CO)₆(PX)₂ derivatives. Symmetrical butterfly singlet diradical structures with one X group on each phosphorus atom in relative cis or trans positions are also found for the Cp₂Co₂(PX)₂ derivatives and are the global minima for Cp₂Co₂(PCl)₂ as well as Cp₂Co₂S₂. In all cases the cis structures are of lower energy than the corresponding trans structures. Rhombus structures having neither Co-Co nor E-E bonds are also found for all of the Cp₂Co₂(PX)₂ derivatives but always at higher energies than the butterfly structures, ranging from 17 to 29 kcal/mol above the global minima.     

Sensitive detection of endocrine disrupters using ionic liquid--single walled carbon nanotubes modified screen-printed based biosensors

Simple and low cost biosensor based on screen-printed electrode for sensitive detection of some alkylphenols was developed, by entrapment of HRP in a nanocomposite gel based on single-walled carbon nanotubes (SWCNTs) and 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF₆]) ionic liquid. Raman and FTIR spectroscopy, CV and EIS studies demonstrate the interaction between SWCNTs and ionic liquid. The nanocomposite gel, SWCNT-[BMIM][PF₆] provides to the modified sensor a considerable enhanced electrocatalytic activity toward hydrogen peroxide reduction. The HRP based biosensor exhibits high sensitivity and good stability, allowing a detection of the alkylphenols at an applied potential of −0.2 V vs. Ag/AgCl, in linear range from 5.5 to 97.7 μM for 4-t-octylphenol and respectively, between 5.5 and 140 μM for 4-n-nonylphenol, with a response time of about 5 s. The detection limit was 1.1 μM for 4-t-octylphenol, and respectively 0.4 μM for 4-n-nonylphenol (S/N = 3).     

Parameterization of peptide 13C carbonyl chemical shielding anisotropy in molecular dynamics simulations.

NMR chemical shielding anisotropy (CSA) relaxation is an important tool in the study of dynamical processes in proteins and nucleic acids in solution. Herein, we investigate how dynamical variations in local geometry affect the chemical shielding anisotropy relaxation of the carbonyl carbon nucleus, using the following protocol: 1) Using density functional theory, the carbonyl (13)C' CSA is computed for 103 conformations of the model peptide group N-methylacetamide (NMA). 2) The variations in computed (13)C' CSA parameters are fitted against quadratic hypersurfaces containing cross terms between the variables. 3) The predictive quality of the CSA hypersurfaces is validated by comparing the predicted and de novo calculated (13)C' CSAs for 20 molecular dynamics snapshots. 4) The CSA fluctuations and their autocorrelation and cross correlation functions due to bond-length and bond-angle distortions are predicted for a chemistry Harvard molecular mechanics (CHARMM) molecular dynamics trajectory of Ca(2+)-saturated calmodulin and GB3 from the hypersurfaces, as well as for a molecular dynamics (MD) simulation of an NMA trimer using a quantum mechanically correct forcefield. We find that the fluctuations can be represented by a 0.93 scaling factor of the CSA tensor for both R(1) and R(2) relaxations for residues in helix, coil, and sheet alike. This result is important, as it establishes that (13)C' relaxation is a valid tool for measurement of interesting dynamical events in proteins.     

Novel nanocomposite membranes from cellulose acetate and clay‐silica nanowires

In this study, a new class of heterogeneous membranes based on cellulose acetate (CA) polymer and a complex filler clay‐silica nanowires (SiO₂NWs) was investigated for potential biomedical applications. SiO₂NWs were synthesized using natural clay through a facile sol–gel method and were dispersed in the polymer solution by sonication in the 1.25, 2.5, and 5% weight ratio to the CA acetate polymer. Membranes were subsequently prepared via phase inversion by precipitation of the CA polymer in water. The pristine CA membrane and SiO₂NWs based nanocomposites membranes were characterized using different characterization techniques. The presence of the SiO₂NWs in the CA membrane was found to significantly enhance the protein retention, water wettability and thermal as well as mechanical properties in comparison to the pristine CA membrane. Water flows studies at different temperatures and the retention of bovine serum albumin have been studied and the nanocomposite membranes were found to exhibit superior performances compared with the pristine CA membranes. SiO₂NWs‐CA membranes showed a much higher stability to the water temperature change during separation than CA membranes. Morphological changes clearly revealed that the composite membrane were much more compact than the pristine CA membranes. The rabbit dermal fibroblasts cell viability in cultures after 72 hr of incubation was found to be greater than 80%. These newly synthesized composite membranes exhibit a high potential to be used for various medical applications because of their non‐cytotoxic characteristics. Copyright © 2016 John Wiley & Sons, Ltd.     

Pyrolysis of polyphenylenes with PCL or/and PSt side chains

Thermal degradation characteristic of polyphenylenes is an important issue for developing a rational technology of polymer processing and applications. In this study, we discussed thermal degradation of polyphenylenes (PP) with poly(-caprolactone) (PCL) and/or PCL/polystyrene copolymers (PSt) prepared by combined controlled polymerization and cross-coupling processes via direct pyrolysis mass spectrometry. When PP-graft-PCL/PSt copolymers were considered, thermally less stabile PCL side chains decomposed in the first step. In the second stage of pyrolysis, the decomposition of the polystyrene chains has taken place. A slight increase in thermal stability of PCL chains for PP-graft-PCL/PSt copolymers was noted compared to copolymer PP-graft-PCL due to the interaction between PSt and PCL chains. This interaction was stronger when PSt chains were linked to the 2-position of the 1,4-phenylene ring.