Synthesis of waterborne acrylic/clay nanocomposites by controlled surface initiation from macroinitiator modified montmorillonite

The nitroxide mediated controlled surface initiated polymerization of methyl methacrylate (MMA)/butyl acrylate (n-BA) was carried out with a macroinitiator modified montmorillonite. The macroinitiator was synthesized by the nitroxide mediated polymerization of vinylbenzyl trimethylammonium chloride (VBTMACl), methylmethacrylate (MMA) and styrene (S) at 90 °C using BlocBuilder®. The macroinitiator was exchanged with the sodium cations of the montmorillonite, to yield surface modified reactive montmorillonite. The bulk polymerizations of BA/MMA from the clay surface produced controlled molecular weight polymers that were able to exfoliate the clay. This controlled polymer/clay nanocomposite was used as masterbatch and further dispersed in monomers and miniemulsified to perform miniemulsion polymerization of BA/MMA (90/10 wt.%) at 30 wt.% solids content at low emulsifier concentration. The adhesive properties of the nanocomposites prepared with the masterbatch were proved to be better than those prepared with an organically modified clay.     

Thermostable Trioxane-Dioxolane Copolymers Obtained with Boron Trifluoride: Acrylonitrile Complex as Initiator

Trioxane was copolymerized with small amounts of dioxolane in benzene in the presence of a boron trifluoride:a crylonitrile complex as initiator. The kinetics of reactions was expressed in terms of topoenergetic principles. The copolymerizations had no induction periods and the maximum reaction rate was found proportional to the square of both the initiator and monomers concentrations. A zwitterionic mechanism is suggested for initiation. The activation energy for the system with 5% dioxolane was determined as 18.3 kcal/mol. The melting behavior of the copolymers is briefly discussed as a function of the dioxolane initial content, and is indicative of the amorphous-crystalline coupling phenomenon. The copolymers with ～ 5% dioxolane are thermostable in air up to 250%deg; and are recommended for practical purposes.     

NMR Characterization of Substituted Aromatic Poly (Ether Sulofone)s

Abstract

The synthesis of a variety of substituted bisphenol A polysulfones, including nitro, amino, aminomethyl, ethyl, and methyl derivatives, is described. Nuclear magnetic resonance (NMR) (both proton and carbon, and several 2-D experiments) data confirm conclusions on the substitution site based on arguments on inductive effects in the phenyl rings. The proton ortho to the oxygen in the bisphenol A (BPA) residue is replaced in electrophilic substitution reactions. The degree of substitution was also calculated from the NMR results. The ethyl and methyl derivatives were expected, from the starting reactants, to each have a BPA ring substituted. The NMR data showed that, on the average, this is true. The nitro derivative also has substitution in every BPA ring, while the amino and aminomethyl derivatives have only intermittent BPA rings substituted. Measured degrees of substitution (DS) varied from 0.11 to 2.25.     

New Aspects of Polymers Containing Quaternary Ammonium Groups

It was established that linear polymers with quaternary ammonium groups are obtained by the reaction of chloromethylated polystyrene (CMPS) with hydroxyalkylic tertiary amines when the amines contain one or two hydroxyl groups, and that crosslinked polymers are obtained with aminoether groups when the amines have three hydroxyl groups, i.e., tris(2-hydroxyethy1)amine. The aminoether units appear by intramolecular rearrangement of quaternary ammonium structural units. Kinetic studies on the synthesis of polymers with quaternary ammonium groups from CMPS, poly(N,N-dimethylamino-ethylmethacrylate), and poly(N,N-dimethylaminopropylacrylamide), were performed. The main factors which influence the kinetics of reactions are steric hindrance of near neighboring groups, hydrophilic effect for hydroxyalkylamines and polymer-solvent interaction.     

New Fluorinated Poly(imide siloxane) Random and Block Copolymers with Variation of Siloxane Loading

Several new random and block copoly(imide siloxane)s have been prepared by the solution polycondensation of commercially available 4,4′-oxydianiline (ODA) and amino-propyl terminated polydimethylsiloxane (APPS) with 4,4′-(hexafluoro-isopropylidene)diphthalic anhydride (6FDA). The siloxane loading was kept to 10, 20, 30, 40 and 50 wt% in the copolymers. The random copolymers were prepared by a one pot solution imidization technique, and two pot solution imidization technique was adopted for the synthesis of the block copolymers. The diamine ODA and the dianhydride 6FDA composed the hard block segment, while APPS and 6FDA composed the soft block segment. The hard block length was kept constant while the soft block lengths were varied by varying the siloxane loading. Accordingly, block copoly(imide siloxane)s were prepared on increasing the soft block lengths (DP) from 3 to 6, 10, 18 and 36 for fixed hard block length of 22. The resulting polymers have been well characterized by IR, NMR and GPC techniques. Thermal and mechanical properties of the random and block copolymers were compared with the already reported homopolyimide without siloxane moiety.     

Coordination Polymers. 9. Chelate Polymers Derived from Bisphenolic Complexes and Propylenediamine

Chelate polymers derived from bis(2,4-dihydroxybenzaldehyde)propyl-enediimine M and bis(2,4-dihydroxyacetophenone)propylenediimine M (M = Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺) with aromatic acid chlorides were prepared by interfacial polycondensation. Also, chelate polysiloxanes were obtained from the same monomers and α,ω-dichloropolydimethyl-siloxane. The spectral, thermal, magnetic, and electrical properties of the polychelates were studied.     

The obtaining of NiCr2O4 nanoparticles by unconventional synthesis methods

This paper presents a study regarding the obtaining of NiCr₂O₄ by two new unconventional synthesis methods: (i) the first method is based on the formation of Cr(III) and Ni(II) carboxylate-type precursors in the redox reaction between the nitrate ion and 1,3-propanediol. The thermal decomposition of these complex combinations, at ~300 °C, leads to an oxide mixture of Cr₂O_3+x and NiO, with advanced homogeneity, small particles and high reactivity. On heating this mixture at 500 °C, Cr₂O₃ reacts with NiO to form NiCr₂O₄, which was evidenced by FT-IR and X-ray diffractometry (XRD) analysis; (ii) the second method starts from a mechanical mixture of (NH₄)₂Cr₂O₇ and Ni(NO₃)₂·6H₂O. On heating this mixture, a violent decomposition at 240 °C with formation of an oxides mixture (Cr₂O₃ + CrO₃) and NiO takes place. On thermal treatment up to 500 °C, an intermediary phase NiCrO₄ is formed, which by decomposition at ~700 °C leads to NiCr₂O₄, evidenced by FT-IR and XRD analysis. NiCr₂O₄ is formed, in both cases, starting with a temperature higher than 400 °C, when the non-stoichiometric chromium oxide (Cr₂O_3+x ) loses the oxygen excess and turns to stoichiometric chromium oxide (Cr₂O₃), which further reacts with NiO.     

Thermal study of a shape memory alloy (SMA) spring actuator designed to insure the motion of a barrier structure

The study concerns an experimental model using a SMA spring actuator for improving the whole performance of a barrier structure. The study is, specifically, focused on the thermal analysis of the SMA spring material and on determination of the SMA spring working time periods at different values of the activating electric current inducing different phase changing speeds.     

Investigation of the cellulose ethers effect on the Portland cement hydration by thermal analysis

Cellulose ethers (CE) are introduced in almost all cement-based dry mortars in order to retain water in mortar mass avoiding losing it too quickly by substrate absorption or water evaporation. In this way the workability of the fresh material, the adherence to the substrate and internal-strength characteristics of mortar, render or tile adhesive are improved. One of the side effects of cellulose ethers is the Portland cement hydration delaying. The influence of six commercial cellulose ethers, hydroxyethylmethyl cellulose (HEMC) type, on the hydration of Portland cement CEM I 42.5 R, was followed by thermal analysis (TG and DTA curves). Three of these cellulose ethers are unmodified, and have different viscosities, while three of them have the same viscosity but differ in the degree of modification (unmodified, one with medium modification and one with high modification). The interest of dry mortars producers for the effects of these cellulose ethers, is generated by the wide offer available on the market and by the absence of systematic data on the effect of different viscosities and degrees of modification on dry mortars properties. In order to quantify the effect of the CE on the cement hydration, the surface area of the endothermic effect corresponding to the dehydration of portlandite (Ca(OH)₂), formed after 1, 3, and 7 days of hydration, was defined. It was noted that the proportion of Ca(OH)₂ in samples containing CE after 1 day was 30–40 % lower than in reference sample. After 3 and 7 days of hydration the proportion of Ca(OH)₂ in samples containing CE approaches that of reference sample (10–20 % less). For the same period of hydration, the different viscosity, and different degree of modification of cellulose ethers cause variations in narrow limits of the proportion of Ca(OH)₂, and the degree of cement hydration, respectively.     

Erratum to: “In vitro biological activity comparison of some hydroxyapatite-based composite materials using simulated body fluid”

The original version of the article was published in Cent. Eur. J. Chem. 11(10) (2013) pp. 1583–1598. Unfortunately, the original version of this article contains a mistake in the affiliation section. The affiliation for R?zvan Stefan is Veterinary Medicine Faculty, University of Agricultural Science and Veterinary Medicine, RO-400372 Cluj Napoca, Romania.